[Intel-gfx] [PATCH i-g-t] gem_flink_race/prime_self_import: Improve test reliability
Morton, Derek J
derek.j.morton at intel.com
Thu Dec 10 03:51:29 PST 2015
>
>
>-----Original Message-----
>From: Daniel Vetter [mailto:daniel.vetter at ffwll.ch] On Behalf Of Daniel Vetter
>Sent: Thursday, December 10, 2015 10:13 AM
>To: Morton, Derek J
>Cc: intel-gfx at lists.freedesktop.org; Wood, Thomas
>Subject: Re: [Intel-gfx] [PATCH i-g-t] gem_flink_race/prime_self_import: Improve test reliability
>
>On Tue, Dec 08, 2015 at 12:44:44PM +0000, Derek Morton wrote:
>> gem_flink_race and prime_self_import have subtests which read the
>> number of open gem objects from debugfs to determine if objects have
>> leaked during the test. However the test can fail sporadically if the
>> number of gem objects changes due to other process activity.
>> This patch introduces a change to check the number of gem objects
>> several times to filter out any fluctuations.
>
>Why exactly does this happen? IGT tests should be run on bare metal, with everything else killed/subdued/shutup. If there's still things going on that create objects, we need to stop them from doing that.
>
>If this only applies to Android, or some special Android deamon them imo check for that at runtime and igt_skip("your setup is invalid, deamon %s running\n"); is the correct fix. After all just because you sampled for a bit doesn't mean that it wont still change right when you start running the test for real, so this is still fragile.
Before running tests on android we do stop everything possible. I suspect the culprit is coreu getting automatically restarted after it is stopped. I had additional debug while developing this patch and what I saw was the system being mostly quiescent but with some very low level background activity. 1 extra object being created and then deleted occasionally. Depending on whether it occurred at the start or end of the test it was resulting in a reported leak of either 1 or -1 objects. The patch fixes that issue by taking several samples and requiring them to be the same, therefore filtering out the low level background noise. It would not help if something in the background allocated an object and kept it allocated, but I have not seen that happen. I only saw once the object count increasing for 2 consecutive reads hence the count to 4 to give a margin. The test was failing about 10%. With this patch I got 100% pass across 300 runs of each of the tests.
If you are concerned about the behaviour when running the test with a load of background activity I could add code to limit to the reset of the count and fail the test in that instance. That would give a benefit of distinguishing a test fail due to excessive background activity from a detected leak.
I would not want to just have the test skip as that introduces a hole in our test coverage.
>
>Also would be good to extract get_stable_obj_count to a proper igt library function, if it indeed needs to be this tricky. And then add the explanation for why we need this in the gtkdoc.
I can move the code to an igt library. Which library would you suggest? Igt_debugfs ?
//Derek
>
>Thanks, Daniel
>>
>> Signed-off-by: Derek Morton <derek.j.morton at intel.com>
>> ---
>> tests/gem_flink_race.c | 34 +++++++++++++++++++++++++++++-----
>> tests/prime_self_import.c | 43
>> +++++++++++++++++++++++++++++++++----------
>> 2 files changed, 62 insertions(+), 15 deletions(-)
>>
>> diff --git a/tests/gem_flink_race.c b/tests/gem_flink_race.c index
>> b17ef85..0552e12 100644
>> --- a/tests/gem_flink_race.c
>> +++ b/tests/gem_flink_race.c
>> @@ -44,7 +44,7 @@ IGT_TEST_DESCRIPTION("Check for flink/open vs. gem close races.");
>> * in the flink name and corresponding reference getting leaked.
>> */
>>
>> -/* We want lockless and I'm to lazy to dig out an atomic libarary. On
>> x86 this
>> +/* We want lockless and I'm to lazy to dig out an atomic library. On
>> +x86 this
>> * works, too. */
>> volatile int pls_die = 0;
>> int fd;
>> @@ -65,6 +65,32 @@ static int get_object_count(void)
>> return ret;
>> }
>>
>> +static int get_stable_obj_count(int driver) {
>> + /* The test relies on the system being in the same state before and
>> + after the test so any difference in the object count is a result of
>> + leaks during the test. gem_quiescent_gpu() mostly achieves this but
>> + occasionally obj_count can still change. The loop ensures obj_count
>> + has remained stable over several checks */
>> + int obj_count, prev_obj_count;
>> + int loop_count = 0;
>> + gem_quiescent_gpu(driver);
>> + prev_obj_count = get_object_count();
>> + while (loop_count < 4) {
>> + usleep(200000);
>> + gem_quiescent_gpu(driver);
>> + obj_count = get_object_count();
>> + if (obj_count == prev_obj_count) {
>> + loop_count++;
>> + } else {
>> + igt_debug("loop_count=%d, obj_count=%d, prev_obj_count=%d\n", loop_count, obj_count, prev_obj_count);
>> + loop_count = 0;
>> + prev_obj_count = obj_count;
>> + }
>> +
>> + }
>> + return obj_count;
>> +}
>>
>> static void *thread_fn_flink_name(void *p) { @@ -164,8 +190,7 @@
>> static void test_flink_close(void)
>> * up the counts */
>> fake = drm_open_driver(DRIVER_INTEL);
>>
>> - gem_quiescent_gpu(fake);
>> - obj_count = get_object_count();
>> + obj_count = get_stable_obj_count(fake);
>>
>> num_threads = sysconf(_SC_NPROCESSORS_ONLN);
>>
>> @@ -190,8 +215,7 @@ static void test_flink_close(void)
>>
>> close(fd);
>>
>> - gem_quiescent_gpu(fake);
>> - obj_count = get_object_count() - obj_count;
>> + obj_count = get_stable_obj_count(fake) - obj_count;
>>
>> igt_info("leaked %i objects\n", obj_count);
>>
>> diff --git a/tests/prime_self_import.c b/tests/prime_self_import.c
>> index 91fe231..977c7b2 100644
>> --- a/tests/prime_self_import.c
>> +++ b/tests/prime_self_import.c
>> @@ -47,7 +47,7 @@
>> #include "drm.h"
>>
>> IGT_TEST_DESCRIPTION("Check whether prime import/export works on the same"
>> - " device.");
>> + " device... but with different fds.");
>>
>> #define BO_SIZE (16*1024)
>>
>> @@ -157,7 +157,7 @@ static void test_with_one_bo_two_files(void)
>> dma_buf_fd2 = prime_handle_to_fd(fd2, handle_open);
>> handle_import = prime_fd_to_handle(fd2, dma_buf_fd2);
>>
>> - /* dma-buf selfimporting an flink bo should give the same handle */
>> + /* dma-buf self importing an flink bo should give the same handle */
>> igt_assert_eq_u32(handle_import, handle_open);
>>
>> close(fd1);
>> @@ -226,6 +226,33 @@ static int get_object_count(void)
>> return ret;
>> }
>>
>> +static int get_stable_obj_count(int driver) {
>> + /* The test relies on the system being in the same state before and
>> + after the test so any difference in the object count is a result of
>> + leaks during the test. gem_quiescent_gpu() mostly achieves this but
>> + occasionally obj_count can still change. The loop ensures obj_count
>> + has remained stable over several checks */
>> + int obj_count, prev_obj_count;
>> + int loop_count = 0;
>> + gem_quiescent_gpu(driver);
>> + prev_obj_count = get_object_count();
>> + while (loop_count < 4) {
>> + usleep(200000);
>> + gem_quiescent_gpu(driver);
>> + obj_count = get_object_count();
>> + if (obj_count == prev_obj_count) {
>> + loop_count++;
>> + } else {
>> + igt_debug("loop_count=%d, obj_count=%d, prev_obj_count=%d\n", loop_count, obj_count, prev_obj_count);
>> + loop_count = 0;
>> + prev_obj_count = obj_count;
>> + }
>> +
>> + }
>> + return obj_count;
>> +}
>> +
>> static void *thread_fn_reimport_vs_close(void *p) {
>> struct drm_gem_close close_bo;
>> @@ -258,8 +285,7 @@ static void test_reimport_close_race(void)
>> * up the counts */
>> fake = drm_open_driver(DRIVER_INTEL);
>>
>> - gem_quiescent_gpu(fake);
>> - obj_count = get_object_count();
>> + obj_count = get_stable_obj_count(fake);
>>
>> num_threads = sysconf(_SC_NPROCESSORS_ONLN);
>>
>> @@ -290,8 +316,7 @@ static void test_reimport_close_race(void)
>> close(fds[0]);
>> close(fds[1]);
>>
>> - gem_quiescent_gpu(fake);
>> - obj_count = get_object_count() - obj_count;
>> + obj_count = get_stable_obj_count(fake) - obj_count;
>>
>> igt_info("leaked %i objects\n", obj_count);
>>
>> @@ -350,8 +375,7 @@ static void test_export_close_race(void)
>> * up the counts */
>> fake = drm_open_driver(DRIVER_INTEL);
>>
>> - gem_quiescent_gpu(fake);
>> - obj_count = get_object_count();
>> + obj_count = get_stable_obj_count(fake);
>>
>> fd = drm_open_driver(DRIVER_INTEL);
>>
>> @@ -373,8 +397,7 @@ static void test_export_close_race(void)
>>
>> close(fd);
>>
>> - gem_quiescent_gpu(fake);
>> - obj_count = get_object_count() - obj_count;
>> + obj_count = get_stable_obj_count(fake) - obj_count;
>>
>> igt_info("leaked %i objects\n", obj_count);
>>
>> --
>> 1.9.1
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>--
>Daniel Vetter
>Software Engineer, Intel Corporation
>http://blog.ffwll.ch
>
More information about the Intel-gfx
mailing list