[Intel-gfx] [PATCH 09/15] drm/i915: Kill intel_prepare_ddi()
Daniel Vetter
daniel at ffwll.ch
Thu Dec 10 05:37:01 PST 2015
On Tue, Dec 08, 2015 at 07:59:44PM +0200, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Move the ddi buffer translation programming to occur from the encoder
> .pre_enable() hook, for just the ddi port we are enabling. Previously
> we used to reprogram the translations for all ddi ports during
> init and during power well enabling.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.c | 1 -
> drivers/gpu/drm/i915/intel_ddi.c | 99 ++++++++++-----------------------
> drivers/gpu/drm/i915/intel_display.c | 3 -
> drivers/gpu/drm/i915/intel_dp_mst.c | 2 +
> drivers/gpu/drm/i915/intel_drv.h | 2 +-
> drivers/gpu/drm/i915/intel_runtime_pm.c | 12 ----
> 6 files changed, 31 insertions(+), 88 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index e6935f1cb689..4d8feff411bb 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -1062,7 +1062,6 @@ static int bxt_resume_prepare(struct drm_i915_private *dev_priv)
> */
> broxton_init_cdclk(dev);
> broxton_ddi_phy_init(dev);
> - intel_prepare_ddi(dev);
>
> return 0;
> }
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 152c813cc43e..074121efb265 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -342,12 +342,6 @@ enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder)
> return port;
> }
>
> -static bool
> -intel_dig_port_supports_hdmi(const struct intel_digital_port *intel_dig_port)
> -{
> - return i915_mmio_reg_valid(intel_dig_port->hdmi.hdmi_reg);
> -}
> -
> static const struct ddi_buf_trans *
> skl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries)
> {
> @@ -409,28 +403,34 @@ skl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries)
> * in either FDI or DP modes only, as HDMI connections will work with both
> * of those
> */
> -static void intel_prepare_ddi_buffers(struct drm_i915_private *dev_priv,
> - enum port port, bool supports_hdmi)
> +void intel_prepare_ddi_buffers(struct intel_encoder *encoder)
s/buffers/buffer/ since it's not just for one encoder? Or do we have a
pile of buffers per encoder? Seems a bit confusing to me, but really just
a bikeshed and was there before.
> {
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> u32 iboost_bit = 0;
> int i, n_hdmi_entries, n_dp_entries, n_edp_entries, hdmi_default_entry,
> size;
> - int hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;
> + int hdmi_level;
> + enum port port;
> const struct ddi_buf_trans *ddi_translations_fdi;
> const struct ddi_buf_trans *ddi_translations_dp;
> const struct ddi_buf_trans *ddi_translations_edp;
> const struct ddi_buf_trans *ddi_translations_hdmi;
> const struct ddi_buf_trans *ddi_translations;
>
> + port = intel_ddi_get_encoder_port(encoder);
> + hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;
> +
> if (IS_BROXTON(dev_priv)) {
> - if (!supports_hdmi)
> + if (encoder->type != INTEL_OUTPUT_HDMI)
> return;
>
> /* Vswing programming for HDMI */
> bxt_ddi_vswing_sequence(dev_priv, hdmi_level, port,
> INTEL_OUTPUT_HDMI);
> return;
> - } else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
> + }
> +
> + if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
> ddi_translations_fdi = NULL;
> ddi_translations_dp =
> skl_get_buf_trans_dp(dev_priv, &n_dp_entries);
> @@ -483,30 +483,18 @@ static void intel_prepare_ddi_buffers(struct drm_i915_private *dev_priv,
> hdmi_default_entry = 7;
> }
>
> - switch (port) {
> - case PORT_A:
> + switch (encoder->type) {
> + case INTEL_OUTPUT_EDP:
> ddi_translations = ddi_translations_edp;
> size = n_edp_entries;
> break;
> - case PORT_B:
> - case PORT_C:
> + case INTEL_OUTPUT_DISPLAYPORT:
> + case INTEL_OUTPUT_HDMI:
> ddi_translations = ddi_translations_dp;
> size = n_dp_entries;
> break;
> - case PORT_D:
> - if (intel_dp_is_edp(dev_priv->dev, PORT_D)) {
> - ddi_translations = ddi_translations_edp;
> - size = n_edp_entries;
> - } else {
> - ddi_translations = ddi_translations_dp;
> - size = n_dp_entries;
> - }
> - break;
> - case PORT_E:
> - if (ddi_translations_fdi)
> - ddi_translations = ddi_translations_fdi;
> - else
> - ddi_translations = ddi_translations_dp;
> + case INTEL_OUTPUT_ANALOG:
> + ddi_translations = ddi_translations_fdi;
> size = n_dp_entries;
> break;
> default:
> @@ -520,7 +508,7 @@ static void intel_prepare_ddi_buffers(struct drm_i915_private *dev_priv,
> ddi_translations[i].trans2);
> }
>
> - if (!supports_hdmi)
> + if (encoder->type != INTEL_OUTPUT_HDMI)
> return;
>
> /* Choose a good default if VBT is badly populated */
> @@ -535,37 +523,6 @@ static void intel_prepare_ddi_buffers(struct drm_i915_private *dev_priv,
> ddi_translations_hdmi[hdmi_level].trans2);
> }
>
> -/* Program DDI buffers translations for DP. By default, program ports A-D in DP
> - * mode and port E for FDI.
> - */
> -void intel_prepare_ddi(struct drm_device *dev)
> -{
> - struct intel_encoder *intel_encoder;
> - bool visited[I915_MAX_PORTS] = { 0, };
> -
> - if (!HAS_DDI(dev))
> - return;
> -
> - for_each_intel_encoder(dev, intel_encoder) {
> - struct intel_digital_port *intel_dig_port;
> - enum port port;
> - bool supports_hdmi;
> -
> - if (intel_encoder->type == INTEL_OUTPUT_DSI)
> - continue;
> -
> - ddi_get_encoder_port(intel_encoder, &intel_dig_port, &port);
> - if (visited[port])
> - continue;
> -
> - supports_hdmi = intel_dig_port &&
> - intel_dig_port_supports_hdmi(intel_dig_port);
> -
> - intel_prepare_ddi_buffers(to_i915(dev), port, supports_hdmi);
> - visited[port] = true;
> - }
> -}
> -
> static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
> enum port port)
> {
> @@ -594,8 +551,14 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
> struct drm_device *dev = crtc->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct intel_encoder *encoder;
> u32 temp, i, rx_ctl_val;
>
> + for_each_encoder_on_crtc(dev, crtc, encoder) {
> + WARN_ON(encoder->type != INTEL_OUTPUT_ANALOG);
> + intel_prepare_ddi_buffers(encoder);
> + }
I still maintain that on hsw the entire fdi stuff really should all be
part of the encoder, since it's all behind the pipe/port crossbar. Would
avoid this little annoyance here.
> +
> /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
> * mode set "sequence for CRT port" document:
> * - TP1 to TP2 time with the default value
> @@ -2321,12 +2284,12 @@ void intel_ddi_clk_select(struct intel_encoder *encoder,
> static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
> {
> struct drm_encoder *encoder = &intel_encoder->base;
> - struct drm_device *dev = encoder->dev;
> - struct drm_i915_private *dev_priv = dev->dev_private;
> + struct drm_i915_private *dev_priv = to_i915(encoder->dev);
> struct intel_crtc *crtc = to_intel_crtc(encoder->crtc);
> enum port port = intel_ddi_get_encoder_port(intel_encoder);
> int type = intel_encoder->type;
> - int hdmi_level;
> +
> + intel_prepare_ddi_buffers(intel_encoder);
>
> if (type == INTEL_OUTPUT_EDP) {
> struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> @@ -2344,17 +2307,11 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
>
> intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
> intel_dp_start_link_train(intel_dp);
> - if (port != PORT_A || INTEL_INFO(dev)->gen >= 9)
> + if (port != PORT_A || INTEL_INFO(dev_priv)->gen >= 9)
> intel_dp_stop_link_train(intel_dp);
> } else if (type == INTEL_OUTPUT_HDMI) {
> struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
>
> - if (IS_BROXTON(dev)) {
> - hdmi_level = dev_priv->vbt.
> - ddi_port_info[port].hdmi_level_shift;
> - bxt_ddi_vswing_sequence(dev_priv, hdmi_level, port,
> - INTEL_OUTPUT_HDMI);
> - }
> intel_hdmi->set_infoframes(encoder,
> crtc->config->has_hdmi_sink,
> &crtc->config->base.adjusted_mode);
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index f1a5404728df..bc7aaa3c431e 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -9649,8 +9649,6 @@ void hsw_disable_pc8(struct drm_i915_private *dev_priv)
> val |= PCH_LP_PARTITION_LEVEL_DISABLE;
> I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
> }
> -
> - intel_prepare_ddi(dev);
> }
>
> static void broxton_modeset_commit_cdclk(struct drm_atomic_state *old_state)
> @@ -15172,7 +15170,6 @@ static void i915_disable_vga(struct drm_device *dev)
> void intel_modeset_init_hw(struct drm_device *dev)
> {
> intel_update_cdclk(dev);
> - intel_prepare_ddi(dev);
This patch is worth it just for this hunk here and the one below in the
skl dmc code.
Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> intel_init_clock_gating(dev);
> intel_enable_gt_powersave(dev);
> }
> diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
> index abfc171888b8..73ac68e21b7e 100644
> --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> @@ -173,6 +173,8 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder)
> intel_mst->port = found->port;
>
> if (intel_dp->active_mst_links == 0) {
> + intel_prepare_ddi_buffers(&intel_dig_port->base);
> +
> intel_ddi_clk_select(&intel_dig_port->base, intel_crtc->config);
>
> intel_dp_set_link_params(intel_dp, intel_crtc->config);
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 43d451c7c366..a8a84b8c2bac 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -996,7 +996,7 @@ void intel_crt_init(struct drm_device *dev);
> /* intel_ddi.c */
> void intel_ddi_clk_select(struct intel_encoder *encoder,
> const struct intel_crtc_state *pipe_config);
> -void intel_prepare_ddi(struct drm_device *dev);
> +void intel_prepare_ddi_buffers(struct intel_encoder *encoder);
> void hsw_fdi_link_train(struct drm_crtc *crtc);
> void intel_ddi_init(struct drm_device *dev, enum port port);
> enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder);
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 2c2151f1c47e..60a592d20402 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -625,7 +625,6 @@ void skl_disable_dc6(struct drm_i915_private *dev_priv)
> static void skl_set_power_well(struct drm_i915_private *dev_priv,
> struct i915_power_well *power_well, bool enable)
> {
> - struct drm_device *dev = dev_priv->dev;
> uint32_t tmp, fuse_status;
> uint32_t req_mask, state_mask;
> bool is_enabled, enable_requested, check_fuse_status = false;
> @@ -669,17 +668,6 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> !I915_READ(HSW_PWR_WELL_BIOS),
> "Invalid for power well status to be enabled, unless done by the BIOS, \
> when request is to disable!\n");
> - if (power_well->data == SKL_DISP_PW_2) {
> - /*
> - * DDI buffer programming unnecessary during
> - * driver-load/resume as it's already done
> - * during modeset initialization then. It's
> - * also invalid here as encoder list is still
> - * uninitialized.
> - */
> - if (!dev_priv->power_domains.initializing)
> - intel_prepare_ddi(dev);
> - }
> I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
> }
>
> --
> 2.4.10
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-gfx
mailing list