[Intel-gfx] [PATCH 03/10] drm/i915: Write out crc frame counts in hex

[Daniel Vetter]

On Mon, Dec 14, 2015 at 06:23:42PM +0200, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> The crc code assumes that the printed frame counter value takes
> exactly 8 characters. The counter is a 32bit value, so to fit
> it into 8 characters we need to print it in hex, in decimal it
> would take 10 characters.
> 
> This obviously needs a corresponding change in intel-gpu-tools.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

ugh, and we hardcode the same %8u on the igt side. What about instead
changing igt to just parse for an %u, push that, then change the kernel to
dump a %u without length? With a few months in between.

At least some backwards compat must be there, otherwise bisecting will be
slightly painful.
-Daniel

> ---
>  drivers/gpu/drm/i915/i915_debugfs.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 24318b79bcfc..96d6e5de0811 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -3518,7 +3518,7 @@ i915_pipe_crc_read(struct file *filep, char __user *user_buf, size_t count,
>  		pipe_crc->tail = (pipe_crc->tail + 1) & (INTEL_PIPE_CRC_ENTRIES_NR - 1);
>  
>  		bytes_read += snprintf(buf, PIPE_CRC_BUFFER_LEN,
> -				       "%8u %8x %8x %8x %8x %8x\n",
> +				       "%8x %8x %8x %8x %8x %8x\n",
>  				       entry->frame, entry->crc[0],
>  				       entry->crc[1], entry->crc[2],
>  				       entry->crc[3], entry->crc[4]);
> -- 
> 2.4.10
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch