[Intel-gfx] [PATCH 2/2 v10] drm/i915/skl: Implementation of SKL display power well support
Damien Lespiau
damien.lespiau at intel.com
Wed Feb 4 05:57:44 PST 2015
From: Satheeshakrishna M <satheeshakrishna.m at intel.com>
This patch implements core logic of SKL display power well.
v2: Addressed Imre's comments
- Added respective DDIs under power well #1 and #2
- Simplified repetitive code in power well programming
v3: Implemented Imre's comments
- Further simplified power well programming
- Made sure that PW 1 is enabled prior to PW 2
v4: Fix minor conflict with the the cherryview support (Damien)
v5: Add the PLL power domain to the always on power well (Damien)
v6: Disable BIOS power well (Imre)
Use power well data for comparison (Imre)
Put the PLL power domain into PW1 as its needed for CDCLK (Satheesh,
Damien)
v7: Addressed Imre's comments
- Lowered the time out to 1ms
- Added parantheses in macro
- Moved debug message and fixed wait_for interval
v8:
- Add a WARN() when swiching on an unknown power well (Imre, done by Damien)
- Whitespace fixes (spaces instead of tabs) (Damien)
v9: (Imre, done by Damien)
- Merge the register definitions with this patch
- Merge the MISC IO power well in this patch
v10: (Imre, done by Damien)
- Define the Misc I/O power domains to be the power well 1 ones as Misc I/O
needs to be enabled with PW1
- Added Transcoder A and VGA domains to PW 2
- Remove the MISC_IO power domains as well in the the always on
domains definition
- Move Misc I/O power well at the top of the power well list so it's turned
on right after PW1.
Reviewed-by: Imre Deak <imre.deak at intel.com>
Signed-off-by: Satheeshakrishna M <satheeshakrishna.m at intel.com> (v3,v6,v7)
Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 20 +++
drivers/gpu/drm/i915/intel_runtime_pm.c | 220 ++++++++++++++++++++++++++++++++
2 files changed, 240 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 33b3d0a2..cd3430f9 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -586,6 +586,19 @@ enum punit_power_well {
PUNIT_POWER_WELL_NUM,
};
+enum skl_disp_power_wells {
+ SKL_DISP_PW_MISC_IO,
+ SKL_DISP_PW_DDI_A_E,
+ SKL_DISP_PW_DDI_B,
+ SKL_DISP_PW_DDI_C,
+ SKL_DISP_PW_DDI_D,
+ SKL_DISP_PW_1 = 14,
+ SKL_DISP_PW_2,
+};
+
+#define SKL_POWER_WELL_STATE(pw) (1 << ((pw) * 2))
+#define SKL_POWER_WELL_REQ(pw) (1 << (((pw) * 2) + 1))
+
#define PUNIT_REG_PWRGT_CTRL 0x60
#define PUNIT_REG_PWRGT_STATUS 0x61
#define PUNIT_PWRGT_MASK(power_well) (3 << ((power_well) * 2))
@@ -6351,6 +6364,13 @@ enum punit_power_well {
#define HSW_PWR_WELL_FORCE_ON (1<<19)
#define HSW_PWR_WELL_CTL6 0x45414
+/* SKL Fuse Status */
+#define SKL_FUSE_STATUS 0x42000
+#define SKL_FUSE_DOWNLOAD_STATUS (1<<31)
+#define SKL_FUSE_PG0_DIST_STATUS (1<<27)
+#define SKL_FUSE_PG1_DIST_STATUS (1<<26)
+#define SKL_FUSE_PG2_DIST_STATUS (1<<25)
+
/* Per-pipe DDI Function Control */
#define TRANS_DDI_FUNC_CTL_A 0x60400
#define TRANS_DDI_FUNC_CTL_B 0x61400
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 49695d7..6d8e29a 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -230,6 +230,136 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
}
}
+#define SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_TRANSCODER_A) | \
+ BIT(POWER_DOMAIN_PIPE_B) | \
+ BIT(POWER_DOMAIN_TRANSCODER_B) | \
+ BIT(POWER_DOMAIN_PIPE_C) | \
+ BIT(POWER_DOMAIN_TRANSCODER_C) | \
+ BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
+ BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
+ BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \
+ BIT(POWER_DOMAIN_AUX_B) | \
+ BIT(POWER_DOMAIN_AUX_C) | \
+ BIT(POWER_DOMAIN_AUX_D) | \
+ BIT(POWER_DOMAIN_AUDIO) | \
+ BIT(POWER_DOMAIN_VGA) | \
+ BIT(POWER_DOMAIN_INIT))
+#define SKL_DISPLAY_POWERWELL_1_POWER_DOMAINS ( \
+ SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
+ BIT(POWER_DOMAIN_PLLS) | \
+ BIT(POWER_DOMAIN_PIPE_A) | \
+ BIT(POWER_DOMAIN_TRANSCODER_EDP) | \
+ BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
+ BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) | \
+ BIT(POWER_DOMAIN_AUX_A) | \
+ BIT(POWER_DOMAIN_INIT))
+#define SKL_DISPLAY_DDI_A_E_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+#define SKL_DISPLAY_DDI_B_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+#define SKL_DISPLAY_DDI_C_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+#define SKL_DISPLAY_DDI_D_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+#define SKL_DISPLAY_MISC_IO_POWER_DOMAINS ( \
+ SKL_DISPLAY_POWERWELL_1_POWER_DOMAINS)
+#define SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS ( \
+ (POWER_DOMAIN_MASK & ~(SKL_DISPLAY_POWERWELL_1_POWER_DOMAINS | \
+ SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
+ SKL_DISPLAY_DDI_A_E_POWER_DOMAINS | \
+ SKL_DISPLAY_DDI_B_POWER_DOMAINS | \
+ SKL_DISPLAY_DDI_C_POWER_DOMAINS | \
+ SKL_DISPLAY_DDI_D_POWER_DOMAINS | \
+ SKL_DISPLAY_MISC_IO_POWER_DOMAINS)) | \
+ BIT(POWER_DOMAIN_INIT))
+
+static void skl_set_power_well(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well, bool enable)
+{
+ uint32_t tmp, fuse_status;
+ uint32_t req_mask, state_mask;
+ bool check_fuse_status = false;
+
+ tmp = I915_READ(HSW_PWR_WELL_DRIVER);
+ fuse_status = I915_READ(SKL_FUSE_STATUS);
+
+ switch (power_well->data) {
+ case SKL_DISP_PW_1:
+ if (wait_for((I915_READ(SKL_FUSE_STATUS) &
+ SKL_FUSE_PG0_DIST_STATUS), 1)) {
+ DRM_ERROR("PG0 not enabled\n");
+ return;
+ }
+ break;
+ case SKL_DISP_PW_2:
+ if (!(fuse_status & SKL_FUSE_PG1_DIST_STATUS)) {
+ DRM_ERROR("PG1 in disabled state\n");
+ return;
+ }
+ break;
+ case SKL_DISP_PW_DDI_A_E:
+ case SKL_DISP_PW_DDI_B:
+ case SKL_DISP_PW_DDI_C:
+ case SKL_DISP_PW_DDI_D:
+ case SKL_DISP_PW_MISC_IO:
+ break;
+ default:
+ WARN(1, "Unknown power well %lu\n", power_well->data);
+ return;
+ }
+
+ req_mask = SKL_POWER_WELL_REQ(power_well->data);
+ state_mask = SKL_POWER_WELL_STATE(power_well->data);
+
+ if (enable) {
+ if (!(tmp & req_mask)) {
+ I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
+ DRM_DEBUG_KMS("Enabling %s\n", power_well->name);
+ }
+
+ if (!(tmp & state_mask)) {
+ if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) &
+ state_mask), 1))
+ DRM_ERROR("%s enable timeout\n",
+ power_well->name);
+ check_fuse_status = true;
+ }
+ } else {
+ if (tmp & req_mask) {
+ I915_WRITE(HSW_PWR_WELL_DRIVER, tmp & ~req_mask);
+ POSTING_READ(HSW_PWR_WELL_DRIVER);
+ DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
+ }
+ }
+
+ if (check_fuse_status) {
+ if (power_well->data == SKL_DISP_PW_1) {
+ if (wait_for((I915_READ(SKL_FUSE_STATUS) &
+ SKL_FUSE_PG1_DIST_STATUS), 1))
+ DRM_ERROR("PG1 distributing status timeout\n");
+ } else if (power_well->data == SKL_DISP_PW_2) {
+ if (wait_for((I915_READ(SKL_FUSE_STATUS) &
+ SKL_FUSE_PG2_DIST_STATUS), 1))
+ DRM_ERROR("PG2 distributing status timeout\n");
+ }
+ }
+}
+
static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
@@ -255,6 +385,36 @@ static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
hsw_set_power_well(dev_priv, power_well, false);
}
+static bool skl_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ uint32_t mask = SKL_POWER_WELL_REQ(power_well->data) |
+ SKL_POWER_WELL_STATE(power_well->data);
+
+ return (I915_READ(HSW_PWR_WELL_DRIVER) & mask) == mask;
+}
+
+static void skl_power_well_sync_hw(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ skl_set_power_well(dev_priv, power_well, power_well->count > 0);
+
+ /* Clear any request made by BIOS as driver is taking over */
+ I915_WRITE(HSW_PWR_WELL_BIOS, 0);
+}
+
+static void skl_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ skl_set_power_well(dev_priv, power_well, true);
+}
+
+static void skl_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ skl_set_power_well(dev_priv, power_well, false);
+}
+
static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
@@ -829,6 +989,13 @@ static const struct i915_power_well_ops hsw_power_well_ops = {
.is_enabled = hsw_power_well_enabled,
};
+static const struct i915_power_well_ops skl_power_well_ops = {
+ .sync_hw = skl_power_well_sync_hw,
+ .enable = skl_power_well_enable,
+ .disable = skl_power_well_disable,
+ .is_enabled = skl_power_well_enabled,
+};
+
static struct i915_power_well hsw_power_wells[] = {
{
.name = "always-on",
@@ -1059,6 +1226,57 @@ static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_pr
return NULL;
}
+static struct i915_power_well skl_power_wells[] = {
+ {
+ .name = "always-on",
+ .always_on = 1,
+ .domains = SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS,
+ .ops = &i9xx_always_on_power_well_ops,
+ },
+ {
+ .name = "power well 1",
+ .domains = SKL_DISPLAY_POWERWELL_1_POWER_DOMAINS,
+ .ops = &skl_power_well_ops,
+ .data = SKL_DISP_PW_1,
+ },
+ {
+ .name = "MISC IO power well",
+ .domains = SKL_DISPLAY_MISC_IO_POWER_DOMAINS,
+ .ops = &skl_power_well_ops,
+ .data = SKL_DISP_PW_MISC_IO,
+ },
+ {
+ .name = "power well 2",
+ .domains = SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS,
+ .ops = &skl_power_well_ops,
+ .data = SKL_DISP_PW_2,
+ },
+ {
+ .name = "DDI A/E power well",
+ .domains = SKL_DISPLAY_DDI_A_E_POWER_DOMAINS,
+ .ops = &skl_power_well_ops,
+ .data = SKL_DISP_PW_DDI_A_E,
+ },
+ {
+ .name = "DDI B power well",
+ .domains = SKL_DISPLAY_DDI_B_POWER_DOMAINS,
+ .ops = &skl_power_well_ops,
+ .data = SKL_DISP_PW_DDI_B,
+ },
+ {
+ .name = "DDI C power well",
+ .domains = SKL_DISPLAY_DDI_C_POWER_DOMAINS,
+ .ops = &skl_power_well_ops,
+ .data = SKL_DISP_PW_DDI_C,
+ },
+ {
+ .name = "DDI D power well",
+ .domains = SKL_DISPLAY_DDI_D_POWER_DOMAINS,
+ .ops = &skl_power_well_ops,
+ .data = SKL_DISP_PW_DDI_D,
+ },
+};
+
#define set_power_wells(power_domains, __power_wells) ({ \
(power_domains)->power_wells = (__power_wells); \
(power_domains)->power_well_count = ARRAY_SIZE(__power_wells); \
@@ -1085,6 +1303,8 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
set_power_wells(power_domains, hsw_power_wells);
} else if (IS_BROADWELL(dev_priv->dev)) {
set_power_wells(power_domains, bdw_power_wells);
+ } else if (IS_SKYLAKE(dev_priv->dev)) {
+ set_power_wells(power_domains, skl_power_wells);
} else if (IS_CHERRYVIEW(dev_priv->dev)) {
set_power_wells(power_domains, chv_power_wells);
} else if (IS_VALLEYVIEW(dev_priv->dev)) {
--
1.8.3.1
More information about the Intel-gfx
mailing list