[Intel-gfx] [PATCH 4/4] drm/i915: Announce support for framebuffer modifiers

[He, Shuang]

Hello, this one is invalid report when debugging smarter patch apply method, in which case, baseline has id bigger than this task will generate invalidate comparison result.
I have fixed the comparison algorithm.
A correct one will be sent out later

Thanks
	--Shuang

> -----Original Message-----
> From: He, Shuang
> Sent: Sunday, February 08, 2015 5:57 PM
> To: He, Shuang; Gao, Ethan; intel-gfx at lists.freedesktop.org;
> tvrtko.ursulin at linux.intel.com
> Subject: RE: [Intel-gfx] [PATCH 4/4] drm/i915: Announce support for
> framebuffer modifiers
> 
> Tested-By: PRC QA PRTS (Patch Regression Test System Contact:
> shuang.he at intel.com)
> Task id: 5721
> -------------------------------------Summary-------------------------------------
> Platform          Delta          drm-intel-nightly          Series
> Applied
> PNV                                  283/283
> 283/283
> ILK              +1                 308/319              309/319
> SNB              +23-1              319/346              341/346
> IVB              +2                 376/384              378/384
> BYT                                  296/296
> 296/296
> HSW                 -1              425/428              424/428
> BDW                                  318/333
> 318/333
> -------------------------------------Detailed-------------------------------------
> Platform  Test                                drm-intel-nightly
> Series Applied
>  ILK  igt_kms_flip_vblank-vs-hang      TIMEOUT(1, M37)PASS(1, M37)
> PASS(1, M37)
> *SNB  igt_kms_flip_dpms-vs-vblank-race      DMESG_WARN(2, M35M22)
> PASS(1, M22)
>  SNB  igt_kms_flip_modeset-vs-vblank-race-interruptible
> DMESG_WARN(1, M35)PASS(1, M22)      PASS(1, M22)
>  SNB  igt_kms_flip_single-buffer-flip-vs-dpms-off-vs-modeset-interruptible
> DMESG_WARN(1, M35)PASS(1, M22)      PASS(1, M22)
>  SNB  igt_kms_mmio_vs_cs_flip_setcrtc_vs_cs_flip      NSPT(1,
> M35)PASS(1, M22)      PASS(1, M22)
>  SNB  igt_kms_mmio_vs_cs_flip_setplane_vs_cs_flip      NSPT(1,
> M35)PASS(1, M22)      PASS(1, M22)
> *SNB  igt_kms_plane_plane-panning-bottom-right-pipe-B-plane-2
> PASS(2, M35M22)      TIMEOUT(1, M22)
>  SNB  igt_kms_rotation_crc_primary-rotation      NSPT(1, M35)PASS(1,
> M22)      PASS(1, M22)
>  SNB  igt_kms_rotation_crc_sprite-rotation      NSPT(1, M35)PASS(1, M22)
> PASS(1, M22)
>  SNB  igt_pm_rpm_cursor      NSPT(1, M35)PASS(1, M22)      PASS(1,
> M22)
>  SNB  igt_pm_rpm_cursor-dpms      NSPT(1, M35)PASS(1, M22)
> PASS(1, M22)
>  SNB  igt_pm_rpm_dpms-mode-unset-non-lpsp      NSPT(1, M35)PASS(1,
> M22)      PASS(1, M22)
>  SNB  igt_pm_rpm_dpms-non-lpsp      NSPT(1, M35)PASS(1, M22)
> PASS(1, M22)
>  SNB  igt_pm_rpm_drm-resources-equal      NSPT(1, M35)PASS(1, M22)
> PASS(1, M22)
>  SNB  igt_pm_rpm_fences      NSPT(1, M35)PASS(1, M22)      PASS(1,
> M22)
>  SNB  igt_pm_rpm_fences-dpms      NSPT(1, M35)PASS(1, M22)
> PASS(1, M22)
>  SNB  igt_pm_rpm_gem-execbuf      NSPT(1, M35)PASS(1, M22)
> PASS(1, M22)
>  SNB  igt_pm_rpm_gem-mmap-cpu      NSPT(1, M35)PASS(1, M22)
> PASS(1, M22)
>  SNB  igt_pm_rpm_gem-mmap-gtt      NSPT(1, M35)PASS(1, M22)
> PASS(1, M22)
>  SNB  igt_pm_rpm_gem-pread      NSPT(1, M35)PASS(1, M22)
> PASS(1, M22)
> *SNB  igt_pm_rpm_i2c      FAIL(1, M22)NSPT(1, M35)      PASS(1, M22)
>  SNB  igt_pm_rpm_modeset-non-lpsp      NSPT(1, M35)PASS(1, M22)
> PASS(1, M22)
>  SNB  igt_pm_rpm_modeset-non-lpsp-stress-no-wait      NSPT(1,
> M35)PASS(1, M22)      PASS(1, M22)
>  SNB  igt_pm_rpm_pci-d3-state      NSPT(1, M35)PASS(1, M22)
> PASS(1, M22)
>  SNB  igt_pm_rpm_rte      NSPT(1, M35)PASS(1, M22)      PASS(1, M22)
> *IVB  igt_gem_storedw_batches_loop_normal      DMESG_WARN(2, M34)
> PASS(1, M34)
>  IVB  igt_gem_storedw_batches_loop_secure-dispatch
> DMESG_WARN(1, M34)PASS(1, M34)      PASS(1, M34)
> *HSW  igt_gem_storedw_loop_blt      PASS(2, M40M20)
> DMESG_WARN(1, M20)
> Note: You need to pay more attention to line start with '*'