[Intel-gfx] [PATCH v2 07/12] drm/i915: Read out display FIFO size on VLV/CHV
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Thu Feb 12 10:59:17 PST 2015
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
VLV/CHV have similar DSPARB registers as older platforms, just more of
them due to more planes. Add a bit of code to read out the current FIFO
split from the registers. Will be useful later when we improve the WM
calculations.
v2: Add display_mmio_offset to DSPARB
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 5 +++-
drivers/gpu/drm/i915/intel_pm.c | 55 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 59 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index b35aaf3..3b48f4b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4026,7 +4026,7 @@ enum skl_disp_power_wells {
#define DPINVGTT_STATUS_MASK 0xff
#define DPINVGTT_STATUS_MASK_CHV 0xfff
-#define DSPARB 0x70030
+#define DSPARB (dev_priv->info.display_mmio_offset + 0x70030)
#define DSPARB_CSTART_MASK (0x7f << 7)
#define DSPARB_CSTART_SHIFT 7
#define DSPARB_BSTART_MASK (0x7f)
@@ -4034,6 +4034,9 @@ enum skl_disp_power_wells {
#define DSPARB_BEND_SHIFT 9 /* on 855 */
#define DSPARB_AEND_SHIFT 0
+#define DSPARB2 (VLV_DISPLAY_BASE + 0x70060) /* vlv/chv */
+#define DSPARB3 (VLV_DISPLAY_BASE + 0x7006c) /* chv */
+
/* pnv/gen4/g4x/vlv/chv */
#define DSPFW1 (dev_priv->info.display_mmio_offset + 0x70034)
#define DSPFW_SR_SHIFT 23
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index fffcf64..e53038e 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -280,6 +280,61 @@ void intel_set_memory_cxsr(struct drm_i915_private *dev_priv, bool enable)
*/
static const int pessimal_latency_ns = 5000;
+#define VLV_FIFO_START(dsparb, dsparb2, lo_shift, hi_shift) \
+ ((((dsparb) >> (lo_shift)) & 0xff) | ((((dsparb2) >> (hi_shift)) & 0x1) << 8))
+
+static int vlv_get_fifo_size(struct drm_device *dev,
+ enum pipe pipe, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int sprite0_start, sprite1_start, size;
+
+ switch (pipe) {
+ uint32_t dsparb, dsparb2, dsparb3;
+ case PIPE_A:
+ dsparb = I915_READ(DSPARB);
+ dsparb2 = I915_READ(DSPARB2);
+ sprite0_start = VLV_FIFO_START(dsparb, dsparb2, 0, 0);
+ sprite1_start = VLV_FIFO_START(dsparb, dsparb2, 8, 4);
+ break;
+ case PIPE_B:
+ dsparb = I915_READ(DSPARB);
+ dsparb2 = I915_READ(DSPARB2);
+ sprite0_start = VLV_FIFO_START(dsparb, dsparb2, 16, 8);
+ sprite1_start = VLV_FIFO_START(dsparb, dsparb2, 24, 12);
+ break;
+ case PIPE_C:
+ dsparb2 = I915_READ(DSPARB2);
+ dsparb3 = I915_READ(DSPARB3);
+ sprite0_start = VLV_FIFO_START(dsparb3, dsparb2, 0, 16);
+ sprite1_start = VLV_FIFO_START(dsparb3, dsparb2, 8, 20);
+ break;
+ default:
+ return 0;
+ }
+
+ switch (plane) {
+ case 0:
+ size = sprite0_start;
+ break;
+ case 1:
+ size = sprite1_start - sprite0_start;
+ break;
+ case 2:
+ size = 512 - 1 - sprite1_start;
+ break;
+ default:
+ return 0;
+ }
+
+ DRM_DEBUG_KMS("Pipe %c %s %c FIFO size: %d\n",
+ pipe_name(pipe), plane == 0 ? "primary" : "sprite",
+ plane == 0 ? plane_name(pipe) : sprite_name(pipe, plane - 1),
+ size);
+
+ return size;
+}
+
static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
{
struct drm_i915_private *dev_priv = dev->dev_private;
--
2.0.5
More information about the Intel-gfx
mailing list