[Intel-gfx] [PATCH 2/4] drm/dp: add DPCD definitions from DP 1.2a
Jani Nikula
jani.nikula at intel.com
Wed Feb 25 04:46:52 PST 2015
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
include/drm/drm_dp_helper.h | 95 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 90 insertions(+), 5 deletions(-)
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 98fefe45d158..209c5b91b0e8 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -92,6 +92,15 @@
# define DP_MSA_TIMING_PAR_IGNORED (1 << 6) /* eDP */
# define DP_OUI_SUPPORT (1 << 7)
+#define DP_RECEIVE_PORT_0_CAP_0 0x008 /* XXX 1.2? */
+# define DP_LOCAL_EDID_PRESENT (1 << 1)
+# define DP_ASSOCIATED_TO_PRECEDING_PORT (1 << 2)
+
+#define DP_RECEIVE_PORT_0_BUFFER_SIZE 0x009
+
+#define DP_RECEIVE_PORT_1_CAP_0 0x00a
+#define DP_RECEIVE_PORT_1_BUFFER_SIZE 0x00b
+
#define DP_I2C_SPEED_CAP 0x00c /* DPI */
# define DP_I2C_SPEED_1K 0x01
# define DP_I2C_SPEED_5K 0x02
@@ -101,10 +110,16 @@
# define DP_I2C_SPEED_1M 0x20
#define DP_EDP_CONFIGURATION_CAP 0x00d /* XXX 1.2? */
+# define DP_ALTERNATE_SCRAMBLER_RESET_CAP (1 << 0)
+# define DP_FRAMING_CHANGE_CAP (1 << 1)
# define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3) /* edp v1.2 or higher */
#define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */
+#define DP_ADAPTER_CAP 0x00f /* 1.2 */
+# define DP_FORCE_LOAD_SENSE_CAP (1 << 0)
+# define DP_ALTERNATE_I2C_PATTERN_CAP (1 << 1)
+
#define DP_SUPPORTED_LINK_RATES 0x010 /* eDP 1.4 */
# define DP_MAX_SUPPORTED_RATES 8 /* 16-bit little-endian */
@@ -115,6 +130,44 @@
#define DP_MSTM_CAP 0x021 /* 1.2 */
# define DP_MST_CAP (1 << 0)
+#define DP_NUMBER_OF_AUDIO_ENDPOINTS 0x022 /* 1.2 */
+
+/* AV_SYNC_DATA_BLOCK 1.2 */
+#define DP_AV_GRANULARITY 0x023
+# define DP_AG_FACTOR_MASK (0xf << 0)
+# define DP_AG_FACTOR_3MS (0 << 0)
+# define DP_AG_FACTOR_2MS (1 << 0)
+# define DP_AG_FACTOR_1MS (2 << 0)
+# define DP_AG_FACTOR_500US (3 << 0)
+# define DP_AG_FACTOR_200US (4 << 0)
+# define DP_AG_FACTOR_100US (5 << 0)
+# define DP_AG_FACTOR_10US (6 << 0)
+# define DP_AG_FACTOR_1US (7 << 0)
+# define DP_VG_FACTOR_MASK (0xf << 4)
+# define DP_VG_FACTOR_3MS (0 << 4)
+# define DP_VG_FACTOR_2MS (1 << 4)
+# define DP_VG_FACTOR_1MS (2 << 4)
+# define DP_VG_FACTOR_500US (3 << 4)
+# define DP_VG_FACTOR_200US (4 << 4)
+# define DP_VG_FACTOR_100US (5 << 4)
+
+#define DP_AUD_DEC_LAT0 0x024
+#define DP_AUD_DEC_LAT1 0x025
+
+#define DP_AUD_PP_LAT0 0x026
+#define DP_AUD_PP_LAT1 0x027
+
+#define DP_VID_INTER_LAT 0x028
+
+#define DP_VID_PROG_LAT 0x029
+
+#define DP_REP_LAT 0x02a
+
+#define DP_AUD_DEL_INS0 0x02b
+#define DP_AUD_DEL_INS1 0x02c
+#define DP_AUD_DEL_INS2 0x02d
+/* End of AV_SYNC_DATA_BLOCK */
+
#define DP_GUID 0x030 /* 1.2 */
#define DP_PSR_SUPPORT 0x070 /* XXX 1.2? */
@@ -173,11 +226,12 @@
# define DP_TRAINING_PATTERN_3 3 /* 1.2 */
# define DP_TRAINING_PATTERN_MASK 0x3
-# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2)
-# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2)
-# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2)
-# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2)
-# define DP_LINK_QUAL_PATTERN_MASK (3 << 2)
+/* DPCD 1.1 only. For DPCD >= 1.2 see per-lane DP_LINK_QUAL_LANEn_SET */
+# define DP_LINK_QUAL_PATTERN_11_DISABLE (0 << 2)
+# define DP_LINK_QUAL_PATTERN_11_D10_2 (1 << 2)
+# define DP_LINK_QUAL_PATTERN_11_ERROR_RATE (2 << 2)
+# define DP_LINK_QUAL_PATTERN_11_PRBS7 (3 << 2)
+# define DP_LINK_QUAL_PATTERN_11_MASK (3 << 2)
# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4)
# define DP_LINK_SCRAMBLING_DISABLE (1 << 5)
@@ -220,14 +274,45 @@
/* bitmask as for DP_I2C_SPEED_CAP */
#define DP_EDP_CONFIGURATION_SET 0x10a /* XXX 1.2? */
+# define DP_ALTERNATE_SCRAMBLER_RESET_ENABLE (1 << 0)
+# define DP_FRAMING_CHANGE_ENABLE (1 << 1)
+# define DP_PANEL_SELF_TEST_ENABLE (1 << 7)
+
+#define DP_LINK_QUAL_LANE0_SET 0x10b /* DPCD >= 1.2 */
+#define DP_LINK_QUAL_LANE1_SET 0x10c
+#define DP_LINK_QUAL_LANE2_SET 0x10d
+#define DP_LINK_QUAL_LANE3_SET 0x10e
+# define DP_LINK_QUAL_PATTERN_DISABLE 0
+# define DP_LINK_QUAL_PATTERN_D10_2 1
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE 2
+# define DP_LINK_QUAL_PATTERN_PRBS7 3
+# define DP_LINK_QUAL_PATTERN_80BIT_CUSTOM 4
+# define DP_LINK_QUAL_PATTERN_HBR2_EYE 5
+# define DP_LINK_QUAL_PATTERN_MASK 7
+
+#define DP_TRAINING_LANE0_1_SET2 0x10f
+# define DP_LANE0_POST_CURSOR2_SET_MASK (3 << 0)
+# define DP_LANE0_MAX_POST_CURSOR2_REACHED (1 << 2)
+# define DP_LANE1_POST_CURSOR2_SET_MASK (3 << 4)
+# define DP_LANE1_MAX_POST_CURSOR2_REACHED (1 << 6)
+
+#define DP_TRAINING_LANE2_3_SET2 0x110
+/* bits as in DP_TRAINING_LANE0_1_SET2, but for lanes 2 and 3 */
#define DP_MSTM_CTRL 0x111 /* 1.2 */
# define DP_MST_EN (1 << 0)
# define DP_UP_REQ_EN (1 << 1)
# define DP_UPSTREAM_IS_SRC (1 << 2)
+#define DP_AUDIO_DELAY0 0x112 /* 1.2 */
+#define DP_AUDIO_DELAY1 0x113
+#define DP_AUDIO_DELAY2 0x114
+
#define DP_LINK_RATE_SET 0x115 /* eDP 1.4 */
+#define DP_UPSTREAM_DEVICE_DP_PWR_NEED 0x118 /* 1.2 */
+# define DP_PWR_NOT_NEEDED (1 << 0)
+
#define DP_PSR_EN_CFG 0x170 /* XXX 1.2? */
# define DP_PSR_ENABLE (1 << 0)
# define DP_PSR_MAIN_LINK_ACTIVE (1 << 1)
--
2.1.4
More information about the Intel-gfx
mailing list