[Intel-gfx] [PATCH 5/8] drm/i915/skl: Adjust get_plane_config() to support Yb/Yf tiling

[Damien Lespiau]

On Wed, Feb 25, 2015 at 04:47:21PM +0000, Tvrtko Ursulin wrote:
> From: Damien Lespiau <damien.lespiau at intel.com>
> 
> v2: Rebased for addfb2 interface and consolidated a bit. (Tvrtko Ursulin)
> v3: Rebased for fb modifier changes. (Tvrtko Ursulin)
> v4: Use intel_fb_stride_alignment instead of open coding. (Damien Lespiau)
> 
> Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
> Reviewed-by: Damien Lespiau <damien.lespiau at intel.com> (v3)

Still looks good to me:

Reviewed-by: Damien Lespiau <damien.lespiau at intel.com>

-- 
Damien

> ---
>  drivers/gpu/drm/i915/intel_display.c | 40 +++++++++++++++++++++---------------
>  1 file changed, 23 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index f262515..626e6538 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -7732,7 +7732,7 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
>  {
>  	struct drm_device *dev = crtc->base.dev;
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> -	u32 val, base, offset, stride_mult;
> +	u32 val, base, offset, stride_mult, tiling;
>  	int pipe = crtc->pipe;
>  	int fourcc, pixel_format;
>  	int aligned_height;
> @@ -7751,11 +7751,6 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
>  	if (!(val & PLANE_CTL_ENABLE))
>  		goto error;
>  
> -	if (val & PLANE_CTL_TILED_MASK) {
> -		plane_config->tiling = I915_TILING_X;
> -		fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
> -	}
> -
>  	pixel_format = val & PLANE_CTL_FORMAT_MASK;
>  	fourcc = skl_format_to_fourcc(pixel_format,
>  				      val & PLANE_CTL_ORDER_RGBX,
> @@ -7763,6 +7758,26 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
>  	fb->pixel_format = fourcc;
>  	fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
>  
> +	tiling = val & PLANE_CTL_TILED_MASK;
> +	switch (tiling) {
> +	case PLANE_CTL_TILED_LINEAR:
> +		fb->modifier[0] = DRM_FORMAT_MOD_NONE;
> +		break;
> +	case PLANE_CTL_TILED_X:
> +		plane_config->tiling = I915_TILING_X;
> +		fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
> +		break;
> +	case PLANE_CTL_TILED_Y:
> +		fb->modifier[0] = I915_FORMAT_MOD_Y_TILED;
> +		break;
> +	case PLANE_CTL_TILED_YF:
> +		fb->modifier[0] = I915_FORMAT_MOD_Yf_TILED;
> +		break;
> +	default:
> +		MISSING_CASE(tiling);
> +		goto error;
> +	}
> +
>  	base = I915_READ(PLANE_SURF(pipe, 0)) & 0xfffff000;
>  	plane_config->base = base;
>  
> @@ -7773,17 +7788,8 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
>  	fb->width = ((val >> 0) & 0x1fff) + 1;
>  
>  	val = I915_READ(PLANE_STRIDE(pipe, 0));
> -	switch (plane_config->tiling) {
> -	case I915_TILING_NONE:
> -		stride_mult = 64;
> -		break;
> -	case I915_TILING_X:
> -		stride_mult = 512;
> -		break;
> -	default:
> -		MISSING_CASE(plane_config->tiling);
> -		goto error;
> -	}
> +	stride_mult = intel_fb_stride_alignment(dev, fb->modifier[0],
> +						fb->pixel_format);
>  	fb->pitches[0] = (val & 0x3ff) * stride_mult;
>  
>  	aligned_height = intel_fb_align_height(dev, fb->height,
> -- 
> 2.3.0
>