[Intel-gfx] [PATCH i-g-t] tests/kms_universal_planes: Inline igt_assert(ret == 0) checks
Daniel Vetter
daniel.vetter at ffwll.ch
Fri Feb 27 07:19:48 PST 2015
This way the debug output in case of failures is nicer since we dump
the entire test condition.
Also replace one open-coded igt_assert_eq.
Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
---
tests/kms_universal_plane.c | 112 ++++++++++++++++++++------------------------
1 file changed, 50 insertions(+), 62 deletions(-)
diff --git a/tests/kms_universal_plane.c b/tests/kms_universal_plane.c
index 789874470a4b..077a948773f4 100644
--- a/tests/kms_universal_plane.c
+++ b/tests/kms_universal_plane.c
@@ -125,7 +125,6 @@ functional_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
functional_test_t test = { .data = data };
igt_display_t *display = &data->display;
igt_plane_t *primary, *sprite;
- int ret;
int num_primary = 0, num_cursor = 0;
int i;
@@ -217,10 +216,9 @@ functional_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
igt_display_commit2(display, COMMIT_UNIVERSAL);
/* Step 10: Enable crtc (fb = -1), take CRC (CRC 7) */
- ret = drmModeSetCrtc(data->drm_fd, output->config.crtc->crtc_id, -1,
- 0, 0, &output->config.connector->connector_id,
- 1, test.mode);
- igt_assert(ret == 0);
+ igt_assert(drmModeSetCrtc(data->drm_fd, output->config.crtc->crtc_id, -1,
+ 0, 0, &output->config.connector->connector_id,
+ 1, test.mode) == 0);
igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_7);
/* Step 11: Disable primary plane */
@@ -238,16 +236,15 @@ functional_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
igt_display_commit2(display, COMMIT_LEGACY);
/* Step 14: Universal API, set primary completely offscreen (CRC 9) */
- ret = drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
- output->config.crtc->crtc_id,
- test.blue_fb.fb_id, 0,
- 9000, 9000,
- test.mode->hdisplay,
- test.mode->vdisplay,
- IGT_FIXED(0,0), IGT_FIXED(0,0),
- IGT_FIXED(test.mode->hdisplay,0),
- IGT_FIXED(test.mode->vdisplay,0));
- igt_assert(ret == 0);
+ igt_assert(drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
+ output->config.crtc->crtc_id,
+ test.blue_fb.fb_id, 0,
+ 9000, 9000,
+ test.mode->hdisplay,
+ test.mode->vdisplay,
+ IGT_FIXED(0,0), IGT_FIXED(0,0),
+ IGT_FIXED(test.mode->hdisplay,0),
+ IGT_FIXED(test.mode->vdisplay,0)) == 0);
igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_9);
/*
@@ -357,7 +354,7 @@ sanity_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
sanity_test_t test = { .data = data };
igt_plane_t *primary;
drmModeModeInfo *mode;
- int i, ret = 0;
+ int i;
igt_skip_on(pipe >= data->display.n_pipes);
@@ -377,54 +374,49 @@ sanity_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
* doesn't cover CRTC (should fail).
*/
igt_plane_set_fb(primary, &test.undersized_fb);
- ret = igt_display_try_commit2(&data->display, COMMIT_UNIVERSAL);
- igt_assert(ret == -EINVAL);
+ igt_assert(igt_display_try_commit2(&data->display, COMMIT_UNIVERSAL) == -EINVAL);
/* Same as above, but different plane positioning. */
igt_plane_set_position(primary, 100, 100);
- ret = igt_display_try_commit2(&data->display, COMMIT_UNIVERSAL);
- igt_assert(ret == -EINVAL);
+ igt_assert(igt_display_try_commit2(&data->display, COMMIT_UNIVERSAL) == -EINVAL);
igt_plane_set_position(primary, 0, 0);
/* Try to use universal plane API to scale down (should fail) */
- ret = drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
- output->config.crtc->crtc_id,
- test.oversized_fb.fb_id, 0,
- 0, 0,
- mode->hdisplay + 100,
- mode->vdisplay + 100,
- IGT_FIXED(0,0), IGT_FIXED(0,0),
- IGT_FIXED(mode->hdisplay,0),
- IGT_FIXED(mode->vdisplay,0));
- igt_assert(ret == -ERANGE);
+ igt_assert(drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
+ output->config.crtc->crtc_id,
+ test.oversized_fb.fb_id, 0,
+ 0, 0,
+ mode->hdisplay + 100,
+ mode->vdisplay + 100,
+ IGT_FIXED(0,0), IGT_FIXED(0,0),
+ IGT_FIXED(mode->hdisplay,0),
+ IGT_FIXED(mode->vdisplay,0)) == -ERANGE);
/* Try to use universal plane API to scale up (should fail) */
- ret = drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
- output->config.crtc->crtc_id,
- test.oversized_fb.fb_id, 0,
- 0, 0,
- mode->hdisplay,
- mode->vdisplay,
- IGT_FIXED(0,0), IGT_FIXED(0,0),
- IGT_FIXED(mode->hdisplay - 100,0),
- IGT_FIXED(mode->vdisplay - 100,0));
- igt_assert(ret == -ERANGE);
+ igt_assert(drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
+ output->config.crtc->crtc_id,
+ test.oversized_fb.fb_id, 0,
+ 0, 0,
+ mode->hdisplay,
+ mode->vdisplay,
+ IGT_FIXED(0,0), IGT_FIXED(0,0),
+ IGT_FIXED(mode->hdisplay - 100,0),
+ IGT_FIXED(mode->vdisplay - 100,0)) == -ERANGE);
/* Find other crtcs and try to program our primary plane on them */
for (i = 0; i < test.moderes->count_crtcs; i++)
if (test.moderes->crtcs[i] != output->config.crtc->crtc_id) {
- ret = drmModeSetPlane(data->drm_fd,
- primary->drm_plane->plane_id,
- test.moderes->crtcs[i],
- test.blue_fb.fb_id, 0,
- 0, 0,
- mode->hdisplay,
- mode->vdisplay,
- IGT_FIXED(0,0), IGT_FIXED(0,0),
- IGT_FIXED(mode->hdisplay,0),
- IGT_FIXED(mode->vdisplay,0));
- igt_assert(ret == -EINVAL);
+ igt_assert(drmModeSetPlane(data->drm_fd,
+ primary->drm_plane->plane_id,
+ test.moderes->crtcs[i],
+ test.blue_fb.fb_id, 0,
+ 0, 0,
+ mode->hdisplay,
+ mode->vdisplay,
+ IGT_FIXED(0,0), IGT_FIXED(0,0),
+ IGT_FIXED(mode->hdisplay,0),
+ IGT_FIXED(mode->vdisplay,0)) == -EINVAL);
}
igt_plane_set_fb(primary, NULL);
@@ -495,9 +487,8 @@ pageflip_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
* Note that crtc->primary->fb = NULL causes flip to return EBUSY for
* historical reasons...
*/
- ret = drmModePageFlip(data->drm_fd, output->config.crtc->crtc_id,
- test.red_fb.fb_id, 0, NULL);
- igt_assert(ret == -EBUSY);
+ igt_assert(drmModePageFlip(data->drm_fd, output->config.crtc->crtc_id,
+ test.red_fb.fb_id, 0, NULL) == -EBUSY);
/* Turn primary plane back on */
igt_plane_set_fb(primary, &test.blue_fb);
@@ -510,10 +501,9 @@ pageflip_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
* completes, which we don't have a good way to specifically test for,
* but at least we can make sure that nothing blows up.
*/
- ret = drmModePageFlip(data->drm_fd, output->config.crtc->crtc_id,
- test.red_fb.fb_id, DRM_MODE_PAGE_FLIP_EVENT,
- &test);
- igt_assert(ret == 0);
+ igt_assert(drmModePageFlip(data->drm_fd, output->config.crtc->crtc_id,
+ test.red_fb.fb_id, DRM_MODE_PAGE_FLIP_EVENT,
+ &test) == 0);
igt_plane_set_fb(primary, NULL);
igt_display_commit2(&data->display, COMMIT_UNIVERSAL);
@@ -524,8 +514,7 @@ pageflip_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
ret = select(data->drm_fd + 1, &fds, NULL, NULL, &timeout);
} while (ret < 0 && errno == EINTR);
igt_assert(ret == 1);
- ret = drmHandleEvent(data->drm_fd, &evctx);
- igt_assert(ret == 0);
+ igt_assert(drmHandleEvent(data->drm_fd, &evctx) == 0);
igt_plane_set_fb(primary, NULL);
pageflip_test_fini(&test, output);
@@ -641,8 +630,7 @@ cursor_leak_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
/* We should be back to the same framebuffer count as when we started */
count2 = i915_gem_fb_count();
- igt_assert_f(count1 == count2, "Cursor framebuffer leak detected. "
- "Initial fb count=%d, final count=%d\n", count1, count2);
+ igt_assert_eq(count1, count2);
}
static void
--
2.1.4
More information about the Intel-gfx
mailing list