[Intel-gfx] [PATCH 1/3] drm/i915: Move watermark handling to intel_wm.c

Ville Syrjälä ville.syrjala at linux.intel.com
Fri Feb 27 10:21:07 PST 2015


On Fri, Feb 27, 2015 at 08:54:19AM -0800, Matt Roper wrote:
> Move watermark handling from intel_pm.c to intel_wm.c and add a little
> bit of kerneldoc to exported functions.  We also add a new
> intel_init_wm() function to setup memory timing information and
> initialize the relevant watermark vfuncs.

How about delaying gratious code movement until a bunch of the in flight
WM stuff has landed? This is just going to cause rebase pains all over.

> 
> Jira: VIZ-4612
> Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
> ---
>  drivers/gpu/drm/i915/Makefile        |    3 +-
>  drivers/gpu/drm/i915/intel_display.c |    1 +
>  drivers/gpu/drm/i915/intel_drv.h     |    3 +
>  drivers/gpu/drm/i915/intel_pm.c      | 3450 ---------------------------------
>  drivers/gpu/drm/i915/intel_wm.c      | 3525 ++++++++++++++++++++++++++++++++++
>  5 files changed, 3531 insertions(+), 3451 deletions(-)
>  create mode 100644 drivers/gpu/drm/i915/intel_wm.c
> 
> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> index f025e7f..5fd2257 100644
> --- a/drivers/gpu/drm/i915/Makefile
> +++ b/drivers/gpu/drm/i915/Makefile
> @@ -55,7 +55,8 @@ i915-y += intel_audio.o \
>  	  intel_overlay.o \
>  	  intel_psr.o \
>  	  intel_sideband.o \
> -	  intel_sprite.o
> +	  intel_sprite.o \
> +	  intel_wm.o
>  i915-$(CONFIG_ACPI)		+= intel_acpi.o intel_opregion.o
>  i915-$(CONFIG_DRM_I915_FBDEV)	+= intel_fbdev.o
>  
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index fad5f76..370c173 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -13213,6 +13213,7 @@ void intel_modeset_init(struct drm_device *dev)
>  	intel_init_quirks(dev);
>  
>  	intel_init_pm(dev);
> +	intel_init_wm(dev);
>  
>  	if (INTEL_INFO(dev)->num_pipes == 0)
>  		return;
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 1fb1529..995d030 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1258,6 +1258,9 @@ void intel_pre_disable_primary(struct drm_crtc *crtc);
>  /* intel_tv.c */
>  void intel_tv_init(struct drm_device *dev);
>  
> +/* intel_wm.c */
> +void intel_init_wm(struct drm_device *dev);
> +
>  /* intel_atomic.c */
>  int intel_atomic_check(struct drm_device *dev,
>  		       struct drm_atomic_state *state);
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 7dcb5b6..f906b05 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -94,3402 +94,6 @@ static void skl_init_clock_gating(struct drm_device *dev)
>  			   GEN8_LQSC_RO_PERF_DIS);
>  }
>  
> -static void i915_pineview_get_mem_freq(struct drm_device *dev)
> -{
> -	struct drm_i915_private *dev_priv = dev->dev_private;
> -	u32 tmp;
> -
> -	tmp = I915_READ(CLKCFG);
> -
> -	switch (tmp & CLKCFG_FSB_MASK) {
> -	case CLKCFG_FSB_533:
> -		dev_priv->fsb_freq = 533; /* 133*4 */
> -		break;
> -	case CLKCFG_FSB_800:
> -		dev_priv->fsb_freq = 800; /* 200*4 */
> -		break;
> -	case CLKCFG_FSB_667:
> -		dev_priv->fsb_freq =  667; /* 167*4 */
> -		break;
> -	case CLKCFG_FSB_400:
> -		dev_priv->fsb_freq = 400; /* 100*4 */
> -		break;
> -	}
> -
> -	switch (tmp & CLKCFG_MEM_MASK) {
> -	case CLKCFG_MEM_533:
> -		dev_priv->mem_freq = 533;
> -		break;
> -	case CLKCFG_MEM_667:
> -		dev_priv->mem_freq = 667;
> -		break;
> -	case CLKCFG_MEM_800:
> -		dev_priv->mem_freq = 800;
> -		break;
> -	}
> -
> -	/* detect pineview DDR3 setting */
> -	tmp = I915_READ(CSHRDDR3CTL);
> -	dev_priv->is_ddr3 = (tmp & CSHRDDR3CTL_DDR3) ? 1 : 0;
> -}
> -
> -static void i915_ironlake_get_mem_freq(struct drm_device *dev)
> -{
> -	struct drm_i915_private *dev_priv = dev->dev_private;
> -	u16 ddrpll, csipll;
> -
> -	ddrpll = I915_READ16(DDRMPLL1);
> -	csipll = I915_READ16(CSIPLL0);
> -
> -	switch (ddrpll & 0xff) {
> -	case 0xc:
> -		dev_priv->mem_freq = 800;
> -		break;
> -	case 0x10:
> -		dev_priv->mem_freq = 1066;
> -		break;
> -	case 0x14:
> -		dev_priv->mem_freq = 1333;
> -		break;
> -	case 0x18:
> -		dev_priv->mem_freq = 1600;
> -		break;
> -	default:
> -		DRM_DEBUG_DRIVER("unknown memory frequency 0x%02x\n",
> -				 ddrpll & 0xff);
> -		dev_priv->mem_freq = 0;
> -		break;
> -	}
> -
> -	dev_priv->ips.r_t = dev_priv->mem_freq;
> -
> -	switch (csipll & 0x3ff) {
> -	case 0x00c:
> -		dev_priv->fsb_freq = 3200;
> -		break;
> -	case 0x00e:
> -		dev_priv->fsb_freq = 3733;
> -		break;
> -	case 0x010:
> -		dev_priv->fsb_freq = 4266;
> -		break;
> -	case 0x012:
> -		dev_priv->fsb_freq = 4800;
> -		break;
> -	case 0x014:
> -		dev_priv->fsb_freq = 5333;
> -		break;
> -	case 0x016:
> -		dev_priv->fsb_freq = 5866;
> -		break;
> -	case 0x018:
> -		dev_priv->fsb_freq = 6400;
> -		break;
> -	default:
> -		DRM_DEBUG_DRIVER("unknown fsb frequency 0x%04x\n",
> -				 csipll & 0x3ff);
> -		dev_priv->fsb_freq = 0;
> -		break;
> -	}
> -
> -	if (dev_priv->fsb_freq == 3200) {
> -		dev_priv->ips.c_m = 0;
> -	} else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) {
> -		dev_priv->ips.c_m = 1;
> -	} else {
> -		dev_priv->ips.c_m = 2;
> -	}
> -}

I don't think these two functions should be moved.

-- 
Ville Syrjälä
Intel OTC


More information about the Intel-gfx mailing list