[Intel-gfx] [PATCH 4/5] drm/i915: Move to atomic plane helpers (v9)
Ander Conselvan de Oliveira
conselvan2 at gmail.com
Fri Jan 9 05:02:18 PST 2015
Reviewed-by: Ander Conselvan de Oliveira <conselvan2 at gmail.com>
On 12/23/2014 08:41 PM, Matt Roper wrote:
> Switch plane handling to use the atomic plane helpers. This means that
> rather than provide our own implementations of .update_plane() and
> .disable_plane(), we expose the lower-level check/prepare/commit/cleanup
> entrypoints and let the DRM core implement update/disable for us using
> those entrypoints.
>
> The other main change that falls out of this patch is that our
> drm_plane's will now always have a valid plane->state that contains the
> relevant plane state (initial state is allocated at plane creation).
> The base drm_plane_state pointed to holds the requested source/dest
> coordinates, and the subclassed intel_plane_state holds the adjusted
> values that our driver actually uses.
>
> v2:
> - Renamed file from intel_atomic.c to intel_atomic_plane.c (Daniel)
> - Fix a copy/paste comment mistake (Bob)
>
> v3:
> - Use prepare/cleanup functions that we've already factored out
> - Use newly refactored pre_commit/commit/post_commit to avoid sleeping
> during vblank evasion
>
> v4:
> - Rebase to latest di-nightly requires adding an 'old_state' parameter
> to atomic_update;
>
> v5:
> - Must have botched a rebase somewhere and lost some work. Restore
> state 'dirty' flag to let begin/end code know which planes to
> run the pre_commit/post_commit hooks for. This would have actually
> shown up as broken in the next commit rather than this one.
>
> v6:
> - Squash kerneldoc patch into this one.
> - Previous patches have now already taken care of most of the
> infrastructure that used to be in this patch. All we're adding here
> now is some thin wrappers.
>
> v7:
> - Check return of intel_plane_duplicate_state() for allocation
> failures.
>
> v8:
> - Drop unused drm_plane_state -> intel_plane_state cast. (Ander)
> - Squash in actual transition to plane helpers. Significant
> refactoring earlier in the patchset has made the combined
> prep+transition much easier to swallow than it was in earlier
> iterations. (Ander)
>
> v9:
> - s/track_fbs/disabled_planes/ in the atomic crtc flags. The only fb's
> we need to update frontbuffer tracking for are those on a plane about
> to be disabled (since the atomic helpers never call prepare_fb() when
> disabling a plane), so the new name more accurately describes what
> we're actually tracking.
>
> Testcase: igt/kms_plane
> Testcase: igt/kms_universal_plane
> Testcase: igt/kms_cursor_crc
> Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
> ---
> Documentation/DocBook/drm.tmpl | 5 +
> drivers/gpu/drm/i915/Makefile | 1 +
> drivers/gpu/drm/i915/intel_atomic_plane.c | 151 ++++++++++++++++++
> drivers/gpu/drm/i915/intel_display.c | 251 +++++++++++++-----------------
> drivers/gpu/drm/i915/intel_drv.h | 10 +-
> drivers/gpu/drm/i915/intel_sprite.c | 50 ++++--
> 6 files changed, 303 insertions(+), 165 deletions(-)
> create mode 100644 drivers/gpu/drm/i915/intel_atomic_plane.c
>
> diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
> index 3b2571e..169d205 100644
> --- a/Documentation/DocBook/drm.tmpl
> +++ b/Documentation/DocBook/drm.tmpl
> @@ -4018,6 +4018,11 @@ int num_ioctls;</synopsis>
> </para>
> </sect2>
> <sect2>
> + <title>Atomic Plane Helpers</title>
> +!Pdrivers/gpu/drm/i915/intel_atomic_plane.c atomic plane helpers
> +!Idrivers/gpu/drm/i915/intel_atomic_plane.c
> + </sect2>
> + <sect2>
> <title>Output Probing</title>
> <para>
> This section covers output probing and related infrastructure like the
> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> index 1849ffa..16e3dc3 100644
> --- a/drivers/gpu/drm/i915/Makefile
> +++ b/drivers/gpu/drm/i915/Makefile
> @@ -66,6 +66,7 @@ i915-y += dvo_ch7017.o \
> dvo_ns2501.o \
> dvo_sil164.o \
> dvo_tfp410.o \
> + intel_atomic_plane.o \
> intel_crt.o \
> intel_ddi.o \
> intel_dp.o \
> diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c b/drivers/gpu/drm/i915/intel_atomic_plane.c
> new file mode 100644
> index 0000000..e7425d6c
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/intel_atomic_plane.c
> @@ -0,0 +1,151 @@
> +/*
> + * Copyright © 2014 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> + * DEALINGS IN THE SOFTWARE.
> + */
> +
> +/**
> + * DOC: atomic plane helper support
> + *
> + * The functions here are used by the atomic plane helper functions to
> + * implement legacy plane updates (i.e., drm_plane->update_plane() and
> + * drm_plane->disable_plane()). This allows plane updates to use the
> + * atomic state infrastructure and perform plane updates as separate
> + * prepare/check/commit/cleanup steps.
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_plane_helper.h>
> +#include "intel_drv.h"
> +
> +/**
> + * intel_plane_duplicate_state - duplicate plane state
> + * @plane: drm plane
> + *
> + * Allocates and returns a copy of the plane state (both common and
> + * Intel-specific) for the specified plane.
> + *
> + * Returns: The newly allocated plane state, or NULL or failure.
> + */
> +struct drm_plane_state *
> +intel_plane_duplicate_state(struct drm_plane *plane)
> +{
> + struct intel_plane_state *state;
> +
> + if (plane->state)
> + state = kmemdup(plane->state, sizeof(*state), GFP_KERNEL);
> + else
> + state = kzalloc(sizeof(*state), GFP_KERNEL);
> +
> + if (!state)
> + return NULL;
> +
> + if (state->base.fb)
> + drm_framebuffer_reference(state->base.fb);
> +
> + return &state->base;
> +}
> +
> +/**
> + * intel_plane_destroy_state - destroy plane state
> + * @plane: drm plane
> + *
> + * Destroys the plane state (both common and Intel-specific) for the
> + * specified plane.
> + */
> +void
> +intel_plane_destroy_state(struct drm_plane *plane,
> + struct drm_plane_state *state)
> +{
> + drm_atomic_helper_plane_destroy_state(plane, state);
> +}
> +
> +static int intel_plane_atomic_check(struct drm_plane *plane,
> + struct drm_plane_state *state)
> +{
> + struct drm_crtc *crtc = state->crtc;
> + struct intel_crtc *intel_crtc;
> + struct intel_plane *intel_plane = to_intel_plane(plane);
> + struct intel_plane_state *intel_state = to_intel_plane_state(state);
> +
> + crtc = crtc ? crtc : plane->crtc;
> + intel_crtc = to_intel_crtc(crtc);
> +
> + /*
> + * The original src/dest coordinates are stored in state->base, but
> + * we want to keep another copy internal to our driver that we can
> + * clip/modify ourselves.
> + */
> + intel_state->src.x1 = state->src_x;
> + intel_state->src.y1 = state->src_y;
> + intel_state->src.x2 = state->src_x + state->src_w;
> + intel_state->src.y2 = state->src_y + state->src_h;
> + intel_state->dst.x1 = state->crtc_x;
> + intel_state->dst.y1 = state->crtc_y;
> + intel_state->dst.x2 = state->crtc_x + state->crtc_w;
> + intel_state->dst.y2 = state->crtc_y + state->crtc_h;
> +
> + /* Clip all planes to CRTC size, or 0x0 if CRTC is disabled */
> + intel_state->clip.x1 = 0;
> + intel_state->clip.y1 = 0;
> + intel_state->clip.x2 =
> + intel_crtc->active ? intel_crtc->config.pipe_src_w : 0;
> + intel_state->clip.y2 =
> + intel_crtc->active ? intel_crtc->config.pipe_src_h : 0;
> +
> + /*
> + * Disabling a plane is always okay; we just need to update
> + * fb tracking in a special way since cleanup_fb() won't
> + * get called by the plane helpers.
> + */
> + if (state->fb == NULL && plane->state->fb != NULL) {
> + /*
> + * 'prepare' is never called when plane is being disabled, so
> + * we need to handle frontbuffer tracking as a special case
> + */
> + intel_crtc->atomic.disabled_planes |=
> + (1 << drm_plane_index(plane));
> + }
> +
> + return intel_plane->check_plane(plane, intel_state);
> +}
> +
> +static void intel_plane_atomic_update(struct drm_plane *plane,
> + struct drm_plane_state *old_state)
> +{
> + struct intel_plane *intel_plane = to_intel_plane(plane);
> + struct intel_plane_state *intel_state =
> + to_intel_plane_state(plane->state);
> +
> + /* Don't disable an already disabled plane */
> + if (!plane->state->fb && !old_state->fb)
> + return;
> +
> + intel_plane->commit_plane(plane, intel_state);
> +}
> +
> +const struct drm_plane_helper_funcs intel_plane_helper_funcs = {
> + .prepare_fb = intel_prepare_plane_fb,
> + .cleanup_fb = intel_cleanup_plane_fb,
> + .atomic_check = intel_plane_atomic_check,
> + .atomic_update = intel_plane_atomic_update,
> +};
> +
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 4bb1a37..e7b51db 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -98,6 +98,8 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
> const struct intel_crtc_config *pipe_config);
> static void chv_prepare_pll(struct intel_crtc *crtc,
> const struct intel_crtc_config *pipe_config);
> +static void intel_begin_crtc_commit(struct drm_crtc *crtc);
> +static void intel_finish_crtc_commit(struct drm_crtc *crtc);
>
> static struct intel_encoder *intel_find_encoder(struct intel_connector *connector, int pipe)
> {
> @@ -9794,6 +9796,8 @@ out_hang:
> static struct drm_crtc_helper_funcs intel_helper_funcs = {
> .mode_set_base_atomic = intel_pipe_set_base_atomic,
> .load_lut = intel_crtc_load_lut,
> + .atomic_begin = intel_begin_crtc_commit,
> + .atomic_flush = intel_finish_crtc_commit,
> };
>
> /**
> @@ -11674,7 +11678,7 @@ intel_prepare_plane_fb(struct drm_plane *plane,
> unsigned frontbuffer_bits = 0;
> int ret = 0;
>
> - if (WARN_ON(fb == plane->fb || !obj))
> + if (!obj)
> return 0;
>
> switch (plane->type) {
> @@ -11741,7 +11745,7 @@ intel_check_primary_plane(struct drm_plane *plane,
> struct drm_device *dev = plane->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct drm_crtc *crtc = state->base.crtc;
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct intel_crtc *intel_crtc;
> struct intel_plane *intel_plane = to_intel_plane(plane);
> struct drm_framebuffer *fb = state->base.fb;
> struct drm_rect *dest = &state->dst;
> @@ -11749,6 +11753,9 @@ intel_check_primary_plane(struct drm_plane *plane,
> const struct drm_rect *clip = &state->clip;
> int ret;
>
> + crtc = crtc ? crtc : plane->crtc;
> + intel_crtc = to_intel_crtc(crtc);
> +
> ret = drm_plane_helper_check_update(plane, crtc, fb,
> src, dest, clip,
> DRM_PLANE_HELPER_NO_SCALING,
> @@ -11804,23 +11811,26 @@ intel_commit_primary_plane(struct drm_plane *plane,
> struct drm_framebuffer *fb = state->base.fb;
> struct drm_device *dev = plane->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct intel_crtc *intel_crtc;
> struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> struct intel_plane *intel_plane = to_intel_plane(plane);
> struct drm_rect *src = &state->src;
>
> + crtc = crtc ? crtc : plane->crtc;
> + intel_crtc = to_intel_crtc(crtc);
> +
> plane->fb = fb;
> crtc->x = src->x1 >> 16;
> crtc->y = src->y1 >> 16;
>
> - intel_plane->crtc_x = state->orig_dst.x1;
> - intel_plane->crtc_y = state->orig_dst.y1;
> - intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
> - intel_plane->crtc_h = drm_rect_height(&state->orig_dst);
> - intel_plane->src_x = state->orig_src.x1;
> - intel_plane->src_y = state->orig_src.y1;
> - intel_plane->src_w = drm_rect_width(&state->orig_src);
> - intel_plane->src_h = drm_rect_height(&state->orig_src);
> + intel_plane->crtc_x = state->base.crtc_x;
> + intel_plane->crtc_y = state->base.crtc_y;
> + intel_plane->crtc_w = state->base.crtc_w;
> + intel_plane->crtc_h = state->base.crtc_h;
> + intel_plane->src_x = state->base.src_x;
> + intel_plane->src_y = state->base.src_y;
> + intel_plane->src_w = state->base.src_w;
> + intel_plane->src_h = state->base.src_h;
> intel_plane->obj = obj;
>
> if (intel_crtc->active) {
> @@ -11850,6 +11860,33 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc)
> struct drm_device *dev = crtc->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct intel_plane *intel_plane;
> + struct drm_plane *p;
> + unsigned fb_bits = 0;
> +
> + /* Track fb's for any planes being disabled */
> + list_for_each_entry(p, &dev->mode_config.plane_list, head) {
> + intel_plane = to_intel_plane(p);
> +
> + if (intel_crtc->atomic.disabled_planes &
> + (1 << drm_plane_index(p))) {
> + switch (p->type) {
> + case DRM_PLANE_TYPE_PRIMARY:
> + fb_bits = INTEL_FRONTBUFFER_PRIMARY(intel_plane->pipe);
> + break;
> + case DRM_PLANE_TYPE_CURSOR:
> + fb_bits = INTEL_FRONTBUFFER_CURSOR(intel_plane->pipe);
> + break;
> + case DRM_PLANE_TYPE_OVERLAY:
> + fb_bits = INTEL_FRONTBUFFER_SPRITE(intel_plane->pipe);
> + break;
> + }
> +
> + mutex_lock(&dev->struct_mutex);
> + i915_gem_track_fb(intel_fb_obj(p->fb), NULL, fb_bits);
> + mutex_unlock(&dev->struct_mutex);
> + }
> + }
>
> if (intel_crtc->atomic.wait_for_flips)
> intel_crtc_wait_for_pending_flips(crtc);
> @@ -11907,111 +11944,6 @@ static void intel_finish_crtc_commit(struct drm_crtc *crtc)
> memset(&intel_crtc->atomic, 0, sizeof(intel_crtc->atomic));
> }
>
> -int
> -intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
> - struct drm_framebuffer *fb, int crtc_x, int crtc_y,
> - unsigned int crtc_w, unsigned int crtc_h,
> - uint32_t src_x, uint32_t src_y,
> - uint32_t src_w, uint32_t src_h)
> -{
> - struct drm_device *dev = plane->dev;
> - struct drm_framebuffer *old_fb = plane->fb;
> - struct intel_plane_state state = {{ 0 }};
> - struct intel_plane *intel_plane = to_intel_plane(plane);
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - int ret;
> -
> - state.base.crtc = crtc ? crtc : plane->crtc;
> - state.base.fb = fb;
> -
> - /* sample coordinates in 16.16 fixed point */
> - state.src.x1 = src_x;
> - state.src.x2 = src_x + src_w;
> - state.src.y1 = src_y;
> - state.src.y2 = src_y + src_h;
> -
> - /* integer pixels */
> - state.dst.x1 = crtc_x;
> - state.dst.x2 = crtc_x + crtc_w;
> - state.dst.y1 = crtc_y;
> - state.dst.y2 = crtc_y + crtc_h;
> -
> - state.clip.x1 = 0;
> - state.clip.y1 = 0;
> - state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0;
> - state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0;
> -
> - state.orig_src = state.src;
> - state.orig_dst = state.dst;
> -
> - ret = intel_plane->check_plane(plane, &state);
> - if (ret)
> - return ret;
> -
> - if (fb != old_fb && fb) {
> - ret = intel_prepare_plane_fb(plane, fb);
> - if (ret)
> - return ret;
> - }
> -
> - if (!state.base.fb) {
> - unsigned fb_bits = 0;
> -
> - switch (plane->type) {
> - case DRM_PLANE_TYPE_PRIMARY:
> - fb_bits = INTEL_FRONTBUFFER_PRIMARY(intel_plane->pipe);
> - break;
> - case DRM_PLANE_TYPE_CURSOR:
> - fb_bits = INTEL_FRONTBUFFER_CURSOR(intel_plane->pipe);
> - break;
> - case DRM_PLANE_TYPE_OVERLAY:
> - fb_bits = INTEL_FRONTBUFFER_SPRITE(intel_plane->pipe);
> - break;
> - }
> -
> - /*
> - * 'prepare' is never called when plane is being disabled, so
> - * we need to handle frontbuffer tracking here
> - */
> - mutex_lock(&dev->struct_mutex);
> - i915_gem_track_fb(intel_fb_obj(plane->fb), NULL, fb_bits);
> - mutex_unlock(&dev->struct_mutex);
> - }
> -
> - intel_begin_crtc_commit(crtc);
> - intel_plane->commit_plane(plane, &state);
> - intel_finish_crtc_commit(crtc);
> -
> - if (fb != old_fb && old_fb) {
> - if (intel_crtc->active)
> - intel_wait_for_vblank(dev, intel_crtc->pipe);
> - intel_cleanup_plane_fb(plane, old_fb);
> - }
> -
> - plane->fb = fb;
> -
> - return 0;
> -}
> -
> -/**
> - * intel_disable_plane - disable a plane
> - * @plane: plane to disable
> - *
> - * General disable handler for all plane types.
> - */
> -int
> -intel_disable_plane(struct drm_plane *plane)
> -{
> - if (!plane->fb)
> - return 0;
> -
> - if (WARN_ON(!plane->crtc))
> - return -EINVAL;
> -
> - return plane->funcs->update_plane(plane, plane->crtc, NULL,
> - 0, 0, 0, 0, 0, 0, 0, 0);
> -}
> -
> /**
> * intel_plane_destroy - destroy a plane
> * @plane: plane to destroy
> @@ -12022,15 +11954,19 @@ intel_disable_plane(struct drm_plane *plane)
> void intel_plane_destroy(struct drm_plane *plane)
> {
> struct intel_plane *intel_plane = to_intel_plane(plane);
> + intel_plane_destroy_state(plane, plane->state);
> drm_plane_cleanup(plane);
> kfree(intel_plane);
> }
>
> static const struct drm_plane_funcs intel_primary_plane_funcs = {
> - .update_plane = intel_update_plane,
> - .disable_plane = intel_disable_plane,
> + .update_plane = drm_plane_helper_update,
> + .disable_plane = drm_plane_helper_disable,
> .destroy = intel_plane_destroy,
> - .set_property = intel_plane_set_property
> + .set_property = intel_plane_set_property,
> + .atomic_duplicate_state = intel_plane_duplicate_state,
> + .atomic_destroy_state = intel_plane_destroy_state,
> +
> };
>
> static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
> @@ -12044,6 +11980,12 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
> if (primary == NULL)
> return NULL;
>
> + primary->base.state = intel_plane_duplicate_state(&primary->base);
> + if (primary->base.state == NULL) {
> + kfree(primary);
> + return NULL;
> + }
> +
> primary->can_scale = false;
> primary->max_downscale = 1;
> primary->pipe = pipe;
> @@ -12079,6 +12021,8 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
> primary->rotation);
> }
>
> + drm_plane_helper_add(&primary->base, &intel_plane_helper_funcs);
> +
> return &primary->base;
> }
>
> @@ -12087,17 +12031,19 @@ intel_check_cursor_plane(struct drm_plane *plane,
> struct intel_plane_state *state)
> {
> struct drm_crtc *crtc = state->base.crtc;
> - struct drm_device *dev = crtc->dev;
> + struct drm_device *dev = plane->dev;
> struct drm_framebuffer *fb = state->base.fb;
> struct drm_rect *dest = &state->dst;
> struct drm_rect *src = &state->src;
> const struct drm_rect *clip = &state->clip;
> struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - int crtc_w, crtc_h;
> + struct intel_crtc *intel_crtc;
> unsigned stride;
> int ret;
>
> + crtc = crtc ? crtc : plane->crtc;
> + intel_crtc = to_intel_crtc(crtc);
> +
> ret = drm_plane_helper_check_update(plane, crtc, fb,
> src, dest, clip,
> DRM_PLANE_HELPER_NO_SCALING,
> @@ -12112,15 +12058,14 @@ intel_check_cursor_plane(struct drm_plane *plane,
> goto finish;
>
> /* Check for which cursor types we support */
> - crtc_w = drm_rect_width(&state->orig_dst);
> - crtc_h = drm_rect_height(&state->orig_dst);
> - if (!cursor_size_ok(dev, crtc_w, crtc_h)) {
> - DRM_DEBUG("Cursor dimension not supported\n");
> + if (!cursor_size_ok(dev, state->base.crtc_w, state->base.crtc_h)) {
> + DRM_DEBUG("Cursor dimension %dx%d not supported\n",
> + state->base.crtc_w, state->base.crtc_h);
> return -EINVAL;
> }
>
> - stride = roundup_pow_of_two(crtc_w) * 4;
> - if (obj->base.size < stride * crtc_h) {
> + stride = roundup_pow_of_two(state->base.crtc_w) * 4;
> + if (obj->base.size < stride * state->base.crtc_h) {
> DRM_DEBUG_KMS("buffer is too small\n");
> return -ENOMEM;
> }
> @@ -12138,8 +12083,7 @@ intel_check_cursor_plane(struct drm_plane *plane,
>
> finish:
> if (intel_crtc->active) {
> - if (intel_crtc->cursor_width !=
> - drm_rect_width(&state->orig_dst))
> + if (intel_crtc->cursor_width != state->base.crtc_w)
> intel_crtc->atomic.update_wm = true;
>
> intel_crtc->atomic.fb_bits |=
> @@ -12154,24 +12098,27 @@ intel_commit_cursor_plane(struct drm_plane *plane,
> struct intel_plane_state *state)
> {
> struct drm_crtc *crtc = state->base.crtc;
> - struct drm_device *dev = crtc->dev;
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct drm_device *dev = plane->dev;
> + struct intel_crtc *intel_crtc;
> struct intel_plane *intel_plane = to_intel_plane(plane);
> struct drm_i915_gem_object *obj = intel_fb_obj(state->base.fb);
> uint32_t addr;
>
> + crtc = crtc ? crtc : plane->crtc;
> + intel_crtc = to_intel_crtc(crtc);
> +
> plane->fb = state->base.fb;
> - crtc->cursor_x = state->orig_dst.x1;
> - crtc->cursor_y = state->orig_dst.y1;
> -
> - intel_plane->crtc_x = state->orig_dst.x1;
> - intel_plane->crtc_y = state->orig_dst.y1;
> - intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
> - intel_plane->crtc_h = drm_rect_height(&state->orig_dst);
> - intel_plane->src_x = state->orig_src.x1;
> - intel_plane->src_y = state->orig_src.y1;
> - intel_plane->src_w = drm_rect_width(&state->orig_src);
> - intel_plane->src_h = drm_rect_height(&state->orig_src);
> + crtc->cursor_x = state->base.crtc_x;
> + crtc->cursor_y = state->base.crtc_y;
> +
> + intel_plane->crtc_x = state->base.crtc_x;
> + intel_plane->crtc_y = state->base.crtc_y;
> + intel_plane->crtc_w = state->base.crtc_w;
> + intel_plane->crtc_h = state->base.crtc_h;
> + intel_plane->src_x = state->base.src_x;
> + intel_plane->src_y = state->base.src_y;
> + intel_plane->src_w = state->base.src_w;
> + intel_plane->src_h = state->base.src_h;
> intel_plane->obj = obj;
>
> if (intel_crtc->cursor_bo == obj)
> @@ -12187,18 +12134,20 @@ intel_commit_cursor_plane(struct drm_plane *plane,
> intel_crtc->cursor_addr = addr;
> intel_crtc->cursor_bo = obj;
> update:
> - intel_crtc->cursor_width = drm_rect_width(&state->orig_dst);
> - intel_crtc->cursor_height = drm_rect_height(&state->orig_dst);
> + intel_crtc->cursor_width = state->base.crtc_w;
> + intel_crtc->cursor_height = state->base.crtc_h;
>
> if (intel_crtc->active)
> intel_crtc_update_cursor(crtc, state->visible);
> }
>
> static const struct drm_plane_funcs intel_cursor_plane_funcs = {
> - .update_plane = intel_update_plane,
> - .disable_plane = intel_disable_plane,
> + .update_plane = drm_plane_helper_update,
> + .disable_plane = drm_plane_helper_disable,
> .destroy = intel_plane_destroy,
> .set_property = intel_plane_set_property,
> + .atomic_duplicate_state = intel_plane_duplicate_state,
> + .atomic_destroy_state = intel_plane_destroy_state,
> };
>
> static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
> @@ -12210,6 +12159,12 @@ static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
> if (cursor == NULL)
> return NULL;
>
> + cursor->base.state = intel_plane_duplicate_state(&cursor->base);
> + if (cursor->base.state == NULL) {
> + kfree(cursor);
> + return NULL;
> + }
> +
> cursor->can_scale = false;
> cursor->max_downscale = 1;
> cursor->pipe = pipe;
> @@ -12236,6 +12191,8 @@ static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
> cursor->rotation);
> }
>
> + drm_plane_helper_add(&cursor->base, &intel_plane_helper_funcs);
> +
> return &cursor->base;
> }
>
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 2523315..604bd22 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -248,8 +248,6 @@ struct intel_plane_state {
> struct drm_rect src;
> struct drm_rect dst;
> struct drm_rect clip;
> - struct drm_rect orig_src;
> - struct drm_rect orig_dst;
> bool visible;
>
> /*
> @@ -437,6 +435,7 @@ struct intel_crtc_atomic_commit {
> bool disable_fbc;
> bool pre_disable_primary;
> bool update_wm;
> + unsigned disabled_planes;
>
> /* Sleepable operations to perform after commit */
> unsigned fb_bits;
> @@ -575,6 +574,7 @@ struct cxsr_latency {
> #define to_intel_encoder(x) container_of(x, struct intel_encoder, base)
> #define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
> #define to_intel_plane(x) container_of(x, struct intel_plane, base)
> +#define to_intel_plane_state(x) container_of(x, struct intel_plane_state, base)
> #define intel_fb_obj(x) (x ? to_intel_framebuffer(x)->obj : NULL)
>
> struct intel_hdmi {
> @@ -1253,4 +1253,10 @@ void intel_pre_disable_primary(struct drm_crtc *crtc);
> /* intel_tv.c */
> void intel_tv_init(struct drm_device *dev);
>
> +/* intel_atomic.c */
> +struct drm_plane_state *intel_plane_duplicate_state(struct drm_plane *plane);
> +void intel_plane_destroy_state(struct drm_plane *plane,
> + struct drm_plane_state *state);
> +extern const struct drm_plane_helper_funcs intel_plane_helper_funcs;
> +
> #endif /* __INTEL_DRV_H__ */
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index 537fff25..16e7c96 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -33,6 +33,7 @@
> #include <drm/drm_crtc.h>
> #include <drm/drm_fourcc.h>
> #include <drm/drm_rect.h>
> +#include <drm/drm_plane_helper.h>
> #include "intel_drv.h"
> #include <drm/i915_drm.h>
> #include "i915_drv.h"
> @@ -1081,12 +1082,13 @@ intel_check_sprite_plane(struct drm_plane *plane,
> uint32_t src_x, src_y, src_w, src_h;
> struct drm_rect *src = &state->src;
> struct drm_rect *dst = &state->dst;
> - struct drm_rect *orig_src = &state->orig_src;
> const struct drm_rect *clip = &state->clip;
> int hscale, vscale;
> int max_scale, min_scale;
> int pixel_size;
>
> + intel_crtc = intel_crtc ? intel_crtc : to_intel_crtc(plane->crtc);
> +
> if (!fb) {
> state->visible = false;
> goto finish;
> @@ -1167,10 +1169,10 @@ intel_check_sprite_plane(struct drm_plane *plane,
> intel_plane->rotation);
>
> /* sanity check to make sure the src viewport wasn't enlarged */
> - WARN_ON(src->x1 < (int) orig_src->x1 ||
> - src->y1 < (int) orig_src->y1 ||
> - src->x2 > (int) orig_src->x2 ||
> - src->y2 > (int) orig_src->y2);
> + WARN_ON(src->x1 < (int) state->base.src_x ||
> + src->y1 < (int) state->base.src_y ||
> + src->x2 > (int) state->base.src_x + state->base.src_w ||
> + src->y2 > (int) state->base.src_y + state->base.src_h);
>
> /*
> * Hardware doesn't handle subpixel coordinates.
> @@ -1267,7 +1269,7 @@ intel_commit_sprite_plane(struct drm_plane *plane,
> struct intel_plane_state *state)
> {
> struct drm_crtc *crtc = state->base.crtc;
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct intel_crtc *intel_crtc;
> struct intel_plane *intel_plane = to_intel_plane(plane);
> struct drm_framebuffer *fb = state->base.fb;
> struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> @@ -1275,14 +1277,19 @@ intel_commit_sprite_plane(struct drm_plane *plane,
> unsigned int crtc_w, crtc_h;
> uint32_t src_x, src_y, src_w, src_h;
>
> - intel_plane->crtc_x = state->orig_dst.x1;
> - intel_plane->crtc_y = state->orig_dst.y1;
> - intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
> - intel_plane->crtc_h = drm_rect_height(&state->orig_dst);
> - intel_plane->src_x = state->orig_src.x1;
> - intel_plane->src_y = state->orig_src.y1;
> - intel_plane->src_w = drm_rect_width(&state->orig_src);
> - intel_plane->src_h = drm_rect_height(&state->orig_src);
> + intel_plane->crtc_x = state->base.crtc_x;
> + intel_plane->crtc_y = state->base.crtc_y;
> + intel_plane->crtc_w = state->base.crtc_w;
> + intel_plane->crtc_h = state->base.crtc_h;
> + intel_plane->src_x = state->base.src_x;
> + intel_plane->src_y = state->base.src_y;
> + intel_plane->src_w = state->base.src_w;
> + intel_plane->src_h = state->base.src_h;
> +
> + crtc = crtc ? crtc : plane->crtc;
> + intel_crtc = to_intel_crtc(crtc);
> +
> + plane->fb = state->base.fb;
> intel_plane->obj = obj;
>
> if (intel_crtc->active) {
> @@ -1406,10 +1413,12 @@ int intel_plane_restore(struct drm_plane *plane)
> }
>
> static const struct drm_plane_funcs intel_sprite_plane_funcs = {
> - .update_plane = intel_update_plane,
> - .disable_plane = intel_disable_plane,
> + .update_plane = drm_plane_helper_update,
> + .disable_plane = drm_plane_helper_disable,
> .destroy = intel_plane_destroy,
> .set_property = intel_plane_set_property,
> + .atomic_duplicate_state = intel_plane_duplicate_state,
> + .atomic_destroy_state = intel_plane_destroy_state,
> };
>
> static uint32_t ilk_plane_formats[] = {
> @@ -1471,6 +1480,13 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
> if (!intel_plane)
> return -ENOMEM;
>
> + intel_plane->base.state =
> + intel_plane_duplicate_state(&intel_plane->base);
> + if (intel_plane->base.state == NULL) {
> + kfree(intel_plane);
> + return -ENOMEM;
> + }
> +
> switch (INTEL_INFO(dev)->gen) {
> case 5:
> case 6:
> @@ -1564,6 +1580,8 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
> dev->mode_config.rotation_property,
> intel_plane->rotation);
>
> + drm_plane_helper_add(&intel_plane->base, &intel_plane_helper_funcs);
> +
> out:
> return ret;
> }
>
More information about the Intel-gfx
mailing list