[Intel-gfx] [Mesa-dev] [PATCH] drm/i915: Enable the HiZ RAW Stall Optimization on Gen8.

Ben Widawsky ben at bwidawsk.net
Sun Jan 11 17:46:09 PST 2015


On Sun, Jan 11, 2015 at 04:05:25PM -0800, Kenneth Graunke wrote:
> On Sunday, January 11, 2015 01:49:41 PM Ben Widawsky wrote:
> > On Sat, Jan 10, 2015 at 06:44:49PM -0800, Kenneth Graunke wrote:
> > > This is an important optimization for avoiding read-after-write (RAW)
> > > stalls in the HiZ buffer.  Certain workloads would run very slowly with
> > > HiZ enabled, but run much faster with the "hiz=false" driconf option.
> > > With this patch, they run at full speed even with HiZ.
> > > 
> > > Improves performance in OglVSInstancing by 3.2x on Broadwell GT3e
> > > (Iris Pro 6200).
> > > 
> > > Thanks to Jesse Barnes for finding this missing bit!
> > > Thanks to Chris Wilson for helping me find where to set it.
> > > 
> > > Signed-off-by: Kenneth Graunke <kenneth at whitecape.org>
> > > Cc: Jesse Barnes <jbarnes at virtuousgeek.org>
> > > ---
> > >  drivers/gpu/drm/i915/intel_ringbuffer.c | 15 +++++++++++++++
> > >  1 file changed, 15 insertions(+)
> > > 
> > > Here's an alternate patch which implements the workaround in the kernel
> > > instead of Mesa.  It's probably better to do it there, since the kernel
> > > does it on Haswell already.
> > > 
> > > diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
> > > index dabc1d8..23020d6 100644
> > > --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> > > +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> > > @@ -796,6 +796,16 @@ static int bdw_init_workarounds(struct intel_engine_cs *ring)
> > >  			  HDC_DONOT_FETCH_MEM_WHEN_MASKED |
> > >  			  (IS_BDW_GT3(dev) ? HDC_FENCE_DEST_SLM_DISABLE : 0));
> > >  
> > > +	/* From the Haswell PRM, Command Reference: Registers, CACHE_MODE_0:
> > > +	 * "The Hierarchical Z RAW Stall Optimization allows non-overlapping
> > > +	 *  polygons in the same 8x4 pixel/sample area to be processed without
> > > +	 *  stalling waiting for the earlier ones to write to Hierarchical Z
> > > +	 *  buffer."
> > > +	 *
> > > +	 * This optimization is off by default for Broadwell; turn it on.
> > > +	 */
> > > +	WA_CLR_BIT_MASKED(CACHE_MODE_0_GEN7, HIZ_RAW_STALL_OPT_DISABLE);
> > > +
> > >  	/* Wa4x4STCOptimizationDisable:bdw */
> > >  	WA_SET_BIT_MASKED(CACHE_MODE_1,
> > >  			  GEN8_4x4_STC_OPTIMIZATION_DISABLE);
> > > @@ -836,6 +846,11 @@ static int chv_init_workarounds(struct intel_engine_cs *ring)
> > >  			  HDC_FORCE_NON_COHERENT |
> > >  			  HDC_DONOT_FETCH_MEM_WHEN_MASKED);
> > >  
> > > +	/* According to the CACHE_MODE_0 default value documentation, some
> > > +	 * CHV platforms disable this optimization by default.  Turn it on.
> > > +	 */
> > > +	WA_CLR_BIT_MASKED(CACHE_MODE_0_GEN7, HIZ_RAW_STALL_OPT_DISABLE);
> > > +
> > >  	/* Improve HiZ throughput on CHV. */
> > >  	WA_SET_BIT_MASKED(HIZ_CHICKEN, CHV_HZ_8X8_MODE_IN_1X);
> > >  
> > 
> > I think you should do this as two separate patches, 1 per platform. For the BSW
> > patch (given that I had the same functionality in the kernel patch I asked you
> > to look at ;-) and FWIW, Jordan has numbers on BSW B-step with my kernel patch
> > which we can use for the commit):
> > Signed-off-by: Ben Widawsky <ben at bwidawsk.net>
> 
> Huh, I don't recall seeing that kernel patch.  Sorry.  I guess I'll split it
> and resubmit...
> 

It's not my call, it's just nice to have platform specific bisection. And the
patch wasn't on the list, it was the one I kept asking you to look at in my
branch :-)

> > I haven't looked at Broadwell docs, so I'll let someone else take care of that.
> > 
> > I don't know if I agree with Chris that we should call these in the workaround
> > section, but whatever. init_clock_gating is equally sucky.
> 
> init_clock_gating doesn't work.  The register writes don't stick and they have
> no effect at all.  Setting them here makes them actually take effect in the
> context.
> 
> --Ken

Separate thread now, but are you sure? We're setting at least two context
specific registers in there today, among them: GEN7_FF_THREAD_MODE (which is
important to performance).

AFAIK it should stick, and if it doesn't it's not expected behavior. Unless you
know something I do not?


More information about the Intel-gfx mailing list