[Intel-gfx] [PATCH 1/7] drm/i915: Disable RC6 before configuring in on VLV/CHV

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Follow the sequence in the BIOS spec and clear the RC_CONTROL register
before changing any of the other RC6/RP registers.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index b73d601..e7f0f21 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4712,6 +4712,9 @@ static void cherryview_enable_rps(struct drm_device *dev)
 	 * hasn't enabled a state yet where we need forcewake, BIOS may have.*/
 	gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
 
+	/*  Disable RC states. */
+	I915_WRITE(GEN6_RC_CONTROL, 0);
+
 	/* 2a: Program RC6 thresholds.*/
 	I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
 	I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
@@ -4801,6 +4804,9 @@ static void valleyview_enable_rps(struct drm_device *dev)
 	/* If VLV, Forcewake all wells, else re-direct to regular path */
 	gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
 
+	/*  Disable RC states. */
+	I915_WRITE(GEN6_RC_CONTROL, 0);
+
 	I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
 	I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
 	I915_WRITE(GEN6_RP_UP_EI, 66000);
-- 
2.0.5