[Intel-gfx] [PATCH 08/18] drm/i915: Rework primary plane stuff slightly.
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Thu Jul 2 07:36:52 PDT 2015
Make sure the primary plane is set up correctly. This is done by
setting plane_state->src and plane_state->crtc.
All non-primary planes get disabled. I fear this may trigger
triggers Daniel Stone's black screen bug, so calls to
intel_update_sprite_watermarks may have to be removed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
drivers/gpu/drm/i915/intel_atomic.c | 7 --
drivers/gpu/drm/i915/intel_display.c | 167 +++++++++++++----------------------
drivers/gpu/drm/i915/intel_drv.h | 2 -
3 files changed, 60 insertions(+), 116 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index 429677a111d5..b593612a917d 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -98,13 +98,6 @@ int intel_atomic_check(struct drm_device *dev,
return -EINVAL;
}
- if (crtc_state &&
- crtc_state->quirks & PIPE_CONFIG_QUIRK_INITIAL_PLANES) {
- ret = drm_atomic_add_affected_planes(state, &nuclear_crtc->base);
- if (ret)
- return ret;
- }
-
ret = drm_atomic_helper_check_planes(dev, state);
if (ret)
return ret;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3de855aeb2c4..69aafaa8ed73 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -109,6 +109,7 @@ static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_cr
struct intel_crtc_state *crtc_state);
static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
int num_connectors);
+static void intel_pre_disable_primary(struct drm_crtc *crtc);
static struct intel_encoder *intel_find_encoder(struct intel_connector *connector, int pipe)
{
@@ -2582,11 +2583,12 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
{
struct drm_device *dev = intel_crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_crtc *c;
- struct intel_crtc *i;
struct drm_i915_gem_object *obj;
- struct drm_plane *primary = intel_crtc->base.primary;
struct drm_framebuffer *fb;
+ struct drm_plane *primary = intel_crtc->base.primary;
+ struct intel_plane *p;
+ struct intel_plane_state *plane_state =
+ to_intel_plane_state(primary->state);
if (!plane_config->fb)
return;
@@ -2602,16 +2604,11 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
* Failed to alloc the obj, check to see if we should share
* an fb with another CRTC instead
*/
- for_each_crtc(dev, c) {
- i = to_intel_crtc(c);
-
- if (c == &intel_crtc->base)
- continue;
-
- if (!i->active)
+ for_each_intel_plane(dev, p) {
+ if (p->base.type != DRM_PLANE_TYPE_PRIMARY)
continue;
- fb = c->primary->fb;
+ fb = p->base.state->fb;
if (!fb)
continue;
@@ -2622,18 +2619,28 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
}
}
+ intel_pre_disable_primary(&intel_crtc->base);
+ to_intel_plane(primary)->disable_plane(primary, &intel_crtc->base);
+
return;
valid_fb:
+ drm_framebuffer_reference(fb);
+ primary->fb = plane_state->base.fb = fb;
+ plane_state->base.crtc = primary->crtc = &intel_crtc->base;
+
+ plane_state->base.src_x = plane_state->base.src_y = 0;
+ plane_state->base.src_w = fb->width << 16;
+ plane_state->base.src_h = fb->height << 16;
+
+ plane_state->base.crtc_x = plane_state->base.src_y = 0;
+ plane_state->base.crtc_w = fb->width;
+ plane_state->base.crtc_h = fb->height;
+
+ plane_state->visible = true;
obj = intel_fb_obj(fb);
if (obj->tiling_mode != I915_TILING_NONE)
dev_priv->preserve_bios_swizzle = true;
-
- primary->fb = fb;
- primary->crtc = primary->state->crtc = &intel_crtc->base;
- update_state_fb(primary);
- intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
- obj->frontbuffer_bits |= to_intel_plane(primary)->frontbuffer_bit;
}
static void i9xx_update_primary_plane(struct drm_crtc *crtc,
@@ -11774,34 +11781,6 @@ static bool check_encoder_cloning(struct drm_atomic_state *state,
return true;
}
-static void intel_crtc_check_initial_planes(struct drm_crtc *crtc,
- struct drm_crtc_state *crtc_state)
-{
- struct intel_crtc_state *pipe_config =
- to_intel_crtc_state(crtc_state);
- struct drm_plane *p;
- unsigned visible_mask = 0;
-
- drm_for_each_plane_mask(p, crtc->dev, crtc_state->plane_mask) {
- struct drm_plane_state *plane_state =
- drm_atomic_get_existing_plane_state(crtc_state->state, p);
-
- if (WARN_ON(!plane_state))
- continue;
-
- if (!plane_state->fb)
- crtc_state->plane_mask &=
- ~(1 << drm_plane_index(p));
- else if (to_intel_plane_state(plane_state)->visible)
- visible_mask |= 1 << drm_plane_index(p);
- }
-
- if (!visible_mask)
- return;
-
- pipe_config->quirks &= ~PIPE_CONFIG_QUIRK_INITIAL_PLANES;
-}
-
static int intel_crtc_atomic_check(struct drm_crtc *crtc,
struct drm_crtc_state *crtc_state)
{
@@ -11823,10 +11802,6 @@ static int intel_crtc_atomic_check(struct drm_crtc *crtc,
"[CRTC:%i] mismatch between state->active(%i) and crtc->active(%i)\n",
idx, crtc->state->active, intel_crtc->active);
- /* plane mask is fixed up after all initial planes are calculated */
- if (pipe_config->quirks & PIPE_CONFIG_QUIRK_INITIAL_PLANES)
- intel_crtc_check_initial_planes(crtc, crtc_state);
-
if (mode_changed && !crtc_state->active)
intel_crtc->atomic.update_wm_post = true;
@@ -13168,19 +13143,6 @@ intel_modeset_compute_config(struct drm_atomic_state *state)
continue;
}
- if (pipe_config->quirks & PIPE_CONFIG_QUIRK_INITIAL_PLANES) {
- ret = drm_atomic_add_affected_planes(state, crtc);
- if (ret)
- return ret;
-
- /*
- * We ought to handle i915.fastboot here.
- * If no modeset is required and the primary plane has
- * a fb, update the members of crtc_state as needed,
- * and run the necessary updates during vblank evasion.
- */
- }
-
if (!needs_modeset(crtc_state)) {
if (!(pipe_config->quirks & PIPE_CONFIG_QUIRK_INHERITED_MODE))
continue;
@@ -15164,25 +15126,30 @@ void intel_modeset_init(struct drm_device *dev)
drm_modeset_unlock_all(dev);
for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
+ struct intel_initial_plane_config plane_config;
+ struct drm_plane *plane;
+
+ if (!crtc->base.state->active)
continue;
+ /* disable all non-primary planes */
+ drm_for_each_plane_mask(plane, dev,
+ crtc->base.state->plane_mask)
+ if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+ to_intel_plane(plane)->disable_plane(plane, &crtc->base);
+
+ crtc->base.state->plane_mask &=
+ 1 << drm_plane_index(crtc->base.primary);
+
+ plane_config.fb = NULL;
+ dev_priv->display.get_initial_plane_config(crtc,
+ &plane_config);
+
/*
- * Note that reserving the BIOS fb up front prevents us
- * from stuffing other stolen allocations like the ring
- * on top. This prevents some ugliness at boot time, and
- * can even allow for smooth boot transitions if the BIOS
- * fb is large enough for the active pipe configuration.
+ * If the fb is shared between multiple heads, we'll
+ * just get the first one.
*/
- if (dev_priv->display.get_initial_plane_config) {
- dev_priv->display.get_initial_plane_config(crtc,
- &crtc->plane_config);
- /*
- * If the fb is shared between multiple heads, we'll
- * just get the first one.
- */
- intel_find_initial_plane_obj(crtc, &crtc->plane_config);
- }
+ intel_find_initial_plane_obj(crtc, &plane_config);
}
}
@@ -15430,47 +15397,30 @@ static void readout_plane_state(struct intel_crtc *crtc,
struct intel_plane *p;
struct drm_plane_state *drm_plane_state;
bool active = crtc_state->base.active;
+ bool wrong_plane;
- if (active) {
- crtc_state->quirks |= PIPE_CONFIG_QUIRK_INITIAL_PLANES;
-
- /* apply to previous sw state too */
- to_intel_crtc_state(crtc->base.state)->quirks |=
- PIPE_CONFIG_QUIRK_INITIAL_PLANES;
- }
+ wrong_plane = active && !intel_check_plane_mapping(crtc);
+ if (wrong_plane)
+ crtc->pipe = !crtc->pipe;
for_each_intel_plane(crtc->base.dev, p) {
- bool visible = active;
-
if (crtc->pipe != p->pipe)
continue;
drm_plane_state = p->base.state;
- /* Plane scaler state is not touched here. The first atomic
- * commit will restore all plane scalers to its old state.
- */
-
- if (active && p->base.type == DRM_PLANE_TYPE_PRIMARY) {
- visible = primary_get_hw_state(crtc);
- to_intel_plane_state(drm_plane_state)->visible = visible;
- } else {
- /*
- * unknown state, assume it's off to force a transition
- * to on when calculating state changes.
- */
+ if (p->base.type == DRM_PLANE_TYPE_PRIMARY)
+ to_intel_plane_state(drm_plane_state)->visible =
+ primary_get_hw_state(crtc);
+ else
to_intel_plane_state(drm_plane_state)->visible = false;
- }
- if (visible) {
- crtc_state->base.plane_mask |=
- 1 << drm_plane_index(&p->base);
- } else if (crtc_state->base.state) {
- /* Make this unconditional for atomic hw readout. */
- crtc_state->base.plane_mask &=
- ~(1 << drm_plane_index(&p->base));
- }
+ crtc_state->base.plane_mask |=
+ 1 << drm_plane_index(&p->base);
}
+
+ if (wrong_plane)
+ crtc->pipe = !crtc->pipe;
}
static void intel_modeset_readout_hw_state(struct drm_device *dev)
@@ -15674,6 +15624,9 @@ void intel_modeset_gem_init(struct drm_device *dev)
update_state_fb(c->primary);
c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
}
+ else
+ obj->frontbuffer_bits |=
+ to_intel_plane(c->primary)->frontbuffer_bit;
}
intel_backlight_register(dev);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index eb3bc8a61285..89861fbf031e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -341,7 +341,6 @@ struct intel_crtc_state {
*/
#define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0) /* unreliable sync mode.flags */
#define PIPE_CONFIG_QUIRK_INHERITED_MODE (1<<1) /* mode inherited from firmware */
-#define PIPE_CONFIG_QUIRK_INITIAL_PLANES (1<<2) /* planes are in unknown state */
unsigned long quirks;
/* Pipe source size (ie. panel fitter input size)
@@ -550,7 +549,6 @@ struct intel_crtc {
uint32_t cursor_size;
uint32_t cursor_base;
- struct intel_initial_plane_config plane_config;
struct intel_crtc_state *config;
bool new_enabled;
--
2.1.0
More information about the Intel-gfx
mailing list