[Intel-gfx] [PATCH v2 06/20] drm/i915: Allow fuzzy matching in pipe_config_compare.
Daniel Vetter
daniel at ffwll.ch
Tue Jul 7 03:11:46 PDT 2015
On Tue, Jul 07, 2015 at 09:08:17AM +0200, Maarten Lankhorst wrote:
> Instead of doing ad-hoc checks we already have a way of checking
> if the state is compatible or not. Use this to force a modeset.
>
> Only during modesets, or with PIPE_CONFIG_QUIRK_INHERITED_MODE
> we should check if a full modeset is really needed.
>
> Fastboot will allow the adjust parameter to ignore some stuff
> too, and it will fix up differences in state that are ignored
> by the compare function.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 198 ++++++++++++++++++++++++-----------
> 1 file changed, 139 insertions(+), 59 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 8cd3a7eb1e30..eb7c2e2819b7 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -12277,19 +12277,6 @@ encoder_retry:
> DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
> base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
>
> - /* Check if we need to force a modeset */
> - if (pipe_config->has_audio !=
> - to_intel_crtc_state(crtc->state)->has_audio) {
> - pipe_config->base.mode_changed = true;
> - ret = drm_atomic_add_affected_planes(state, crtc);
> - }
> -
> - /*
> - * Note we have an issue here with infoframes: current code
> - * only updates them on the full mode set path per hw
> - * requirements. So here we should be checking for any
> - * required changes and forcing a mode set.
> - */
> fail:
> return ret;
> }
> @@ -12392,27 +12379,124 @@ static bool intel_fuzzy_clock_check(int clock1, int clock2)
> base.head) \
> if (mask & (1 <<(intel_crtc)->pipe))
>
> +
> +static bool
> +intel_compare_m_n(unsigned int m, unsigned int n,
> + unsigned int m2, unsigned int n2)
> +{
> + if (m == m2 && n == n2)
> + return true;
> +
> + if (!m || !n || !m2 || !n2)
> + return false;
> +
> + if (m > m2) {
> + while (m > m2) {
I think we need to make sure we don't reduce precision by eating low bits,
i.e.
while (m > m2 && !(m & 1) && !(n & 1)) {
> + m >>= 1;
> + n >>= 1;
> + }
> + } else if (m < m2) {
> + while (m < m2) {
> + m2 >>= 1;
> + n2 >>= 1;
> + }
> + }
> +
> + return m == m2 && n == n2;
> +}
> +
> +static bool
> +intel_compare_link_m_n(const struct intel_link_m_n *m_n,
> + const struct intel_link_m_n *m2_n2)
I think these need to take adjust as an agurment and check for exact match
(not just matching ratio), like before.
> +{
> + if (m_n->tu == m2_n2->tu &&
> + intel_compare_m_n(m_n->gmch_m, m_n->gmch_n,
> + m2_n2->gmch_m, m2_n2->gmch_n) &&
> + intel_compare_m_n(m_n->link_m, m_n->link_n,
> + m2_n2->link_m, m2_n2->link_n))
> + return true;
> +
> + return false;
> +}
> +
> static bool
> intel_pipe_config_compare(struct drm_device *dev,
> struct intel_crtc_state *current_config,
> - struct intel_crtc_state *pipe_config)
> + struct intel_crtc_state *pipe_config,
> + bool adjust)
> {
> + bool ret = true;
> +
> +#define INTEL_ERR_OR_DBG_KMS(fmt, ...) \
> + do { \
> + if (!adjust) \
> + DRM_ERROR(fmt, ##__VA_ARGS__); \
> + else \
> + DRM_DEBUG_KMS(fmt, ##__VA_ARGS__); \
> + } while (0)
> +
> #define PIPE_CONF_CHECK_X(name) \
> if (current_config->name != pipe_config->name) { \
> - DRM_ERROR("mismatch in " #name " " \
> + INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
> "(expected 0x%08x, found 0x%08x)\n", \
> current_config->name, \
> pipe_config->name); \
> - return false; \
> + ret = false; \
> }
>
> #define PIPE_CONF_CHECK_I(name) \
> if (current_config->name != pipe_config->name) { \
> - DRM_ERROR("mismatch in " #name " " \
> + INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
> "(expected %i, found %i)\n", \
> current_config->name, \
> pipe_config->name); \
> - return false; \
> + ret = false; \
> + }
> +
> +#define PIPE_CONF_CHECK_M_N(name) \
> + if (!intel_compare_link_m_n(¤t_config->name, \
> + &pipe_config->name)) { \
> + INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
> + "(expected tu %i gmch %i/%i link %i/%i, " \
> + "found tu %i, gmch %i/%i link %i/%i)\n", \
> + current_config->name.tu, \
> + current_config->name.gmch_m, \
> + current_config->name.gmch_n, \
> + current_config->name.link_m, \
> + current_config->name.link_n, \
> + pipe_config->name.tu, \
> + pipe_config->name.gmch_m, \
> + pipe_config->name.gmch_n, \
> + pipe_config->name.link_m, \
> + pipe_config->name.link_n); \
> + ret = false; \
> + }
> +
> +#define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) \
> + if (!intel_compare_link_m_n(¤t_config->name, \
> + &pipe_config->name) && \
> + !intel_compare_link_m_n(¤t_config->alt_name, \
> + &pipe_config->name)) { \
> + INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
> + "(expected tu %i gmch %i/%i link %i/%i, " \
> + "or tu %i gmch %i/%i link %i/%i, " \
> + "found tu %i, gmch %i/%i link %i/%i)\n", \
> + current_config->name.tu, \
> + current_config->name.gmch_m, \
> + current_config->name.gmch_n, \
> + current_config->name.link_m, \
> + current_config->name.link_n, \
> + current_config->alt_name.tu, \
> + current_config->alt_name.gmch_m, \
> + current_config->alt_name.gmch_n, \
> + current_config->alt_name.link_m, \
> + current_config->alt_name.link_n, \
> + pipe_config->name.tu, \
> + pipe_config->name.gmch_m, \
> + pipe_config->name.gmch_n, \
> + pipe_config->name.link_m, \
> + pipe_config->name.link_n); \
> + ret = false; \
> }
>
> /* This is required for BDW+ where there is only one set of registers for
> @@ -12423,30 +12507,30 @@ intel_pipe_config_compare(struct drm_device *dev,
> #define PIPE_CONF_CHECK_I_ALT(name, alt_name) \
> if ((current_config->name != pipe_config->name) && \
> (current_config->alt_name != pipe_config->name)) { \
> - DRM_ERROR("mismatch in " #name " " \
> + INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
> "(expected %i or %i, found %i)\n", \
> current_config->name, \
> current_config->alt_name, \
> pipe_config->name); \
> - return false; \
> + ret = false; \
> }
>
> #define PIPE_CONF_CHECK_FLAGS(name, mask) \
> if ((current_config->name ^ pipe_config->name) & (mask)) { \
> - DRM_ERROR("mismatch in " #name "(" #mask ") " \
> + INTEL_ERR_OR_DBG_KMS("mismatch in " #name "(" #mask ") " \
> "(expected %i, found %i)\n", \
> current_config->name & (mask), \
> pipe_config->name & (mask)); \
> - return false; \
> + ret = false; \
> }
>
> #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
> if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
> - DRM_ERROR("mismatch in " #name " " \
> + INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
> "(expected %i, found %i)\n", \
> current_config->name, \
> pipe_config->name); \
> - return false; \
> + ret = false; \
> }
>
> #define PIPE_CONF_QUIRK(quirk) \
> @@ -12456,35 +12540,18 @@ intel_pipe_config_compare(struct drm_device *dev,
>
> PIPE_CONF_CHECK_I(has_pch_encoder);
> PIPE_CONF_CHECK_I(fdi_lanes);
> - PIPE_CONF_CHECK_I(fdi_m_n.gmch_m);
> - PIPE_CONF_CHECK_I(fdi_m_n.gmch_n);
> - PIPE_CONF_CHECK_I(fdi_m_n.link_m);
> - PIPE_CONF_CHECK_I(fdi_m_n.link_n);
> - PIPE_CONF_CHECK_I(fdi_m_n.tu);
> + PIPE_CONF_CHECK_M_N(fdi_m_n);
>
> PIPE_CONF_CHECK_I(has_dp_encoder);
>
> if (INTEL_INFO(dev)->gen < 8) {
> - PIPE_CONF_CHECK_I(dp_m_n.gmch_m);
> - PIPE_CONF_CHECK_I(dp_m_n.gmch_n);
> - PIPE_CONF_CHECK_I(dp_m_n.link_m);
> - PIPE_CONF_CHECK_I(dp_m_n.link_n);
> - PIPE_CONF_CHECK_I(dp_m_n.tu);
> -
> - if (current_config->has_drrs) {
> - PIPE_CONF_CHECK_I(dp_m2_n2.gmch_m);
> - PIPE_CONF_CHECK_I(dp_m2_n2.gmch_n);
> - PIPE_CONF_CHECK_I(dp_m2_n2.link_m);
> - PIPE_CONF_CHECK_I(dp_m2_n2.link_n);
> - PIPE_CONF_CHECK_I(dp_m2_n2.tu);
> - }
> - } else {
> - PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_m, dp_m2_n2.gmch_m);
> - PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_n, dp_m2_n2.gmch_n);
> - PIPE_CONF_CHECK_I_ALT(dp_m_n.link_m, dp_m2_n2.link_m);
> - PIPE_CONF_CHECK_I_ALT(dp_m_n.link_n, dp_m2_n2.link_n);
> - PIPE_CONF_CHECK_I_ALT(dp_m_n.tu, dp_m2_n2.tu);
> - }
> + PIPE_CONF_CHECK_M_N(dp_m_n);
> +
> + PIPE_CONF_CHECK_I(has_drrs);
> + if (current_config->has_drrs)
> + PIPE_CONF_CHECK_M_N(dp_m2_n2);
> + } else
> + PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2);
>
> PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hdisplay);
> PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_htotal);
> @@ -12580,8 +12647,9 @@ intel_pipe_config_compare(struct drm_device *dev,
> #undef PIPE_CONF_CHECK_FLAGS
> #undef PIPE_CONF_CHECK_CLOCK_FUZZY
> #undef PIPE_CONF_QUIRK
> +#undef INTEL_ERR_OR_DBG_KMS
>
> - return true;
> + return ret;
> }
>
> static void check_wm_state(struct drm_device *dev)
> @@ -12773,8 +12841,11 @@ check_crtc_state(struct drm_device *dev)
> "transitional active state does not match atomic hw state "
> "(expected %i, found %i)\n", crtc->base.state->active, crtc->active);
>
> - if (active &&
> - !intel_pipe_config_compare(dev, crtc->config, &pipe_config)) {
> + if (!active)
> + continue;
> +
> + if (!intel_pipe_config_compare(dev, crtc->config,
> + &pipe_config, false)) {
> I915_STATE_WARN(1, "pipe state doesn't match!\n");
> intel_dump_pipe_config(crtc, &pipe_config,
> "[hw state]");
> @@ -13075,14 +13146,16 @@ intel_modeset_compute_config(struct drm_atomic_state *state)
> return ret;
>
> for_each_crtc_in_state(state, crtc, crtc_state, i) {
> + struct intel_crtc_state *pipe_config =
> + to_intel_crtc_state(crtc_state);
> +
> if (!crtc_state->enable) {
> if (needs_modeset(crtc_state))
> any_ms = true;
> continue;
> }
>
> - if (to_intel_crtc_state(crtc_state)->quirks &
> - PIPE_CONFIG_QUIRK_INITIAL_PLANES) {
> + if (pipe_config->quirks & PIPE_CONFIG_QUIRK_INITIAL_PLANES) {
> ret = drm_atomic_add_affected_planes(state, crtc);
> if (ret)
> return ret;
> @@ -13096,21 +13169,28 @@ intel_modeset_compute_config(struct drm_atomic_state *state)
> }
>
> if (!needs_modeset(crtc_state)) {
> + if (!(pipe_config->quirks & PIPE_CONFIG_QUIRK_INHERITED_MODE))
> + continue;
double negative is harder to read ... what about:
if (!needs_modeset && !INHERITED_MODE)
continue;
And then just unconditionally doing the
add_affected_connectors? It'll be redundant almost always,
but it also won't really matter since it'll be fast.
> +
> ret = drm_atomic_add_affected_connectors(state, crtc);
> if (ret)
> return ret;
> }
>
> - ret = intel_modeset_pipe_config(crtc,
> - to_intel_crtc_state(crtc_state));
> + ret = intel_modeset_pipe_config(crtc, pipe_config);
> if (ret)
> return ret;
>
> - if (needs_modeset(crtc_state))
> - any_ms = true;
> + if (!intel_pipe_config_compare(state->dev,
> + to_intel_crtc_state(crtc->state),
> + pipe_config, true))
> + crtc_state->mode_changed = true;
> + else if (!needs_modeset(crtc_state))
> + continue;
Hm for bebugging I'd always dump the pipe config, even if we notice that
fastboot is posible. Perhaps changes the "[modeset]" below to a
needs_modset() ? "[modeset: full]" : "[modeset: fast]"
>
> + any_ms = true;
> intel_dump_pipe_config(to_intel_crtc(crtc),
> - to_intel_crtc_state(crtc_state),
> + pipe_config,
> "[modeset]");
> }
>
> --
> 2.1.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-gfx
mailing list