[Intel-gfx] [PATCH] drm/i915: Adjust BXT HDMI port clock limits

[Kannan, Vandana]

On 7/6/2015 5:14 PM, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Since
>   commit e62925567c7926e78bc8ca976cde5c28ea265a49
>   Author: Vandana Kannan <vandana.kannan at intel.com>
>   Date:   Wed Jul 1 17:02:57 2015 +0530
>
>      drm/i915/bxt: BUNs related to port PLL
>
> BXT DPLL can now generate frequencies in the 216-223 MHz range.
> Adjust the HDMI port clock checks to account for the reduced range
> of invalid frequencies.
>
> Cc: Vandana Kannan <vandana.kannan at intel.com>
> Cc: Imre Deak <imre.deak at intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>   drivers/gpu/drm/i915/intel_hdmi.c | 9 ++++++---
>   1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index c7e912b..70bad5b 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1174,9 +1174,12 @@ hdmi_port_clock_valid(struct intel_hdmi *hdmi,
>   	if (clock > hdmi_port_clock_limit(hdmi, respect_dvi_limit))
>   		return MODE_CLOCK_HIGH;
>
> -	/* CHV/BXT DPLL can't generate 216-240 MHz */
> -	if ((IS_CHERRYVIEW(dev) || IS_BROXTON(dev)) &&
> -	    clock > 216000 && clock < 240000)
> +	/* BXT DPLL can't generate 223-240 MHz */
> +	if (IS_BROXTON(dev) && clock > 223333 && clock < 240000)
> +		return MODE_CLOCK_RANGE;
> +
BSpec needs an update based on this ?
It shows
"
HDMI/DVI link rates: 0.2 to 3.0 GHz Non-SSC*

*2.17 - 2.4 GHz not supported
"

- Vandana
> +	/* CHV DPLL can't generate 216-240 MHz */
> +	if (IS_CHERRYVIEW(dev) && clock > 216000 && clock < 240000)
>   		return MODE_CLOCK_RANGE;
>
>   	return MODE_OK;
>