[Intel-gfx] [PATCH 04/15] drm/i915: Move DPIO port init earlier

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

To implement DPIO lane power gating on CHV we're going to need to access
DPIO registers from the cmn power well enable hook. That gets called
rather early, so we need to move the DPIO port IOSF sideband port
assignment earlier as well.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_dma.c      | 20 ++++++++++++++++++++
 drivers/gpu/drm/i915/intel_display.c | 22 ----------------------
 2 files changed, 20 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 5e63076..3e9e98a 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -783,6 +783,24 @@ static void intel_device_info_runtime_init(struct drm_device *dev)
 			 info->has_eu_pg ? "y" : "n");
 }
 
+static void intel_init_dpio(struct drm_i915_private *dev_priv)
+{
+	if (!IS_VALLEYVIEW(dev_priv))
+		return;
+
+	/*
+	 * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
+	 * CHV x1 PHY (DP/HDMI D)
+	 * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
+	 */
+	if (IS_CHERRYVIEW(dev_priv)) {
+		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
+		DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
+	} else {
+		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
+	}
+}
+
 /**
  * i915_driver_load - setup chip and create an initial config
  * @dev: DRM device
@@ -983,6 +1001,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
 	intel_device_info_runtime_init(dev);
 
+	intel_init_dpio(dev_priv);
+
 	if (INTEL_INFO(dev)->num_pipes) {
 		ret = drm_vblank_init(dev, INTEL_INFO(dev)->num_pipes);
 		if (ret)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index db518a7..0473b38 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1590,26 +1590,6 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
 	assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
 }
 
-static void intel_init_dpio(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	if (!IS_VALLEYVIEW(dev))
-		return;
-
-	/*
-	 * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
-	 * CHV x1 PHY (DP/HDMI D)
-	 * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
-	 */
-	if (IS_CHERRYVIEW(dev)) {
-		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
-		DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
-	} else {
-		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
-	}
-}
-
 static void vlv_enable_pll(struct intel_crtc *crtc,
 			   const struct intel_crtc_state *pipe_config)
 {
@@ -15049,8 +15029,6 @@ void intel_modeset_init(struct drm_device *dev)
 		}
 	}
 
-	intel_init_dpio(dev);
-
 	intel_shared_dpll_init(dev);
 
 	/* Just disable it once at startup */
-- 
2.3.6