[Intel-gfx] [RFC 5/8] drm/i915: Handle event stop and destroy for commands in flight
sourab.gupta at intel.com
sourab.gupta at intel.com
Wed Jul 15 01:47:00 PDT 2015
From: Sourab Gupta <sourab.gupta at intel.com>
In the periodic OA sampling mode, the event stop would stop forwarding
samples to userspace, and disables OA synchronously. The buffer is
destroyed eventually in event destroy callback. But when we have in flight
RPC commands scheduled on GPU (like in this case), the handling of OA
disabling and buffer destruction has to take those into account. This patch
handles the event stop & destroy conditions after accounting for GPU
commands in flight using the OA unit.
Now, the event stop would just set the event state, and stop forwarding
data to userspace. From userspace perspective, for all purposes, the event
sampling is stopped. This is true for periodic OA samples also. The OA unit
is not disabled here, since there may be RPC commands scheduled on GPU.
A subsequent event start (without event destroy) would start forwarding
samples again.
The event destroy releases the local copy of the RCS buffer. But since, it
is expected that the active reference of buffer is taken while inserting
commands, we can rest assured that buffer is freed up only after GPU is
done with it.
Still there is a need to schedule a worker from event destroy, because we
need to do some further stuff listed below (in this order)
- free up request references
- disable OA unit
- dereference periodic OA buffer (as this is not managed by active ref)
- runtime_pm_put + forcewake_put
The ideal solution here would be to have a callback when the last request
is finished on GPU, so that we can do this stuff there (WIP:Chris'
retire-notification mechanism). Till the time, an async worker thread
will do.
A subsequent event init would have to wait for previously submitted RPC
commands to complete or return -EBUSY. Currently, for the sake of
simplicity, we are returning -EBUSY.
Signed-off-by: Sourab Gupta <sourab.gupta at intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 11 ++-
drivers/gpu/drm/i915/i915_oa_perf.c | 186 +++++++++++++++++++++++++++++++-----
2 files changed, 171 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index eb72f95..b3d5f7e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1653,10 +1653,18 @@ struct i915_oa_reg {
u32 value;
};
+enum i915_oa_event_state {
+ I915_OA_EVENT_INIT,
+ I915_OA_EVENT_STARTED,
+ I915_OA_EVENT_STOP_IN_PROGRESS,
+ I915_OA_EVENT_STOPPED,
+};
+
struct i915_oa_rcs_node {
struct list_head head;
struct drm_i915_gem_request *req;
u32 offset;
+ bool discard;
u32 ctx_id;
};
@@ -1934,7 +1942,7 @@ struct drm_i915_private {
struct perf_event *exclusive_event;
struct intel_context *specific_ctx;
- bool event_active;
+ enum i915_oa_event_state event_state;
bool periodic;
bool multiple_ctx_mode;
@@ -1964,6 +1972,7 @@ struct drm_i915_private {
} oa_rcs_buffer;
struct list_head node_list;
struct work_struct work_timer;
+ struct work_struct work_event_destroy;
} oa_pmu;
#endif
diff --git a/drivers/gpu/drm/i915/i915_oa_perf.c b/drivers/gpu/drm/i915/i915_oa_perf.c
index 491496b..c1e3bea 100644
--- a/drivers/gpu/drm/i915/i915_oa_perf.c
+++ b/drivers/gpu/drm/i915/i915_oa_perf.c
@@ -83,7 +83,7 @@ static u32 forward_oa_snapshots(struct drm_i915_private *dev_priv,
/* We currently only allow exclusive access to the counters
* so only have one event to forward too... */
- if (dev_priv->oa_pmu.event_active)
+ if (dev_priv->oa_pmu.event_state == I915_OA_EVENT_STARTED)
forward_one_oa_snapshot_to_event(dev_priv, snapshot,
exclusive_event);
}
@@ -128,6 +128,9 @@ static void flush_oa_snapshots(struct drm_i915_private *dev_priv,
u32 head;
u32 tail;
+ if (dev_priv->oa_pmu.event_state == I915_OA_EVENT_STOPPED)
+ return;
+
/* Can either flush via hrtimer callback or pmu methods/fops */
if (skip_if_flushing) {
@@ -204,6 +207,36 @@ int i915_oa_rcs_wait_gpu(struct drm_i915_private *dev_priv)
return 0;
}
+void i915_oa_rcs_release_request_ref(struct drm_i915_private *dev_priv)
+{
+ struct i915_oa_rcs_node *entry, *next;
+ struct drm_i915_gem_request *req;
+ unsigned long lock_flags;
+ int ret;
+
+ list_for_each_entry_safe
+ (entry, next, &dev_priv->oa_pmu.node_list, head) {
+ req = entry->req;
+ if (req) {
+ ret = i915_mutex_lock_interruptible(dev_priv->dev);
+ if (ret)
+ break;
+ i915_gem_request_assign(&entry->req, NULL);
+ mutex_unlock(&dev_priv->dev->struct_mutex);
+ }
+
+ /*
+ * This fn won't be running concurrently with forward snapshots
+ * work fn. These are the only two places where list entries
+ * will be deleted. So no need of protecting full loop?
+ */
+ spin_lock_irqsave(&dev_priv->oa_pmu.lock, lock_flags);
+ list_del(&entry->head);
+ spin_unlock_irqrestore(&dev_priv->oa_pmu.lock, lock_flags);
+ kfree(entry);
+ }
+}
+
static void forward_one_oa_rcs_sample(struct drm_i915_private *dev_priv,
struct i915_oa_rcs_node *node)
{
@@ -247,11 +280,19 @@ void forward_oa_rcs_snapshots_work(struct work_struct *__work)
unsigned long lock_flags;
int ret;
+ spin_lock_irqsave(&dev_priv->oa_pmu.lock, lock_flags);
+ if (dev_priv->oa_pmu.event_state != I915_OA_EVENT_STARTED) {
+ spin_unlock_irqrestore(&dev_priv->oa_pmu.lock, lock_flags);
+ return;
+ }
+ spin_unlock_irqrestore(&dev_priv->oa_pmu.lock, lock_flags);
+
list_for_each_entry_safe
(entry, next, &dev_priv->oa_pmu.node_list, head) {
req = entry->req;
if (req && i915_gem_request_completed(req, true)) {
- forward_one_oa_rcs_sample(dev_priv, entry);
+ if (!entry->discard)
+ forward_one_oa_rcs_sample(dev_priv, entry);
ret = i915_mutex_lock_interruptible(dev_priv->dev);
if (ret)
break;
@@ -317,16 +358,101 @@ static void i915_oa_event_destroy(struct perf_event *event)
WARN_ON(event->parent);
- /* Stop updating oacontrol via _oa_context_pin_[un]notify()... */
+ if (dev_priv->oa_pmu.multiple_ctx_mode) {
+ /* Stop updating oacontrol via _oa_context_pin_[un]notify() */
+ spin_lock_irqsave(&dev_priv->oa_pmu.lock, lock_flags);
+ dev_priv->oa_pmu.specific_ctx = NULL;
+ spin_unlock_irqrestore(&dev_priv->oa_pmu.lock, lock_flags);
+
+ cancel_work_sync(&dev_priv->oa_pmu.work_timer);
+ schedule_work(&dev_priv->oa_pmu.work_event_destroy);
+
+ BUG_ON(dev_priv->oa_pmu.exclusive_event != event);
+ dev_priv->oa_pmu.exclusive_event = NULL;
+
+ /* We can deference our local copy of rcs buffer here, since
+ * an active reference of buffer would be taken while
+ * inserting commands. So the buffer would be freed up only
+ * after GPU is done with it.
+ */
+ oa_rcs_buffer_destroy(dev_priv);
+ } else {
+ /* Stop updating oacontrol via _oa_context_pin_[un]notify() */
+ spin_lock_irqsave(&dev_priv->oa_pmu.lock, lock_flags);
+ dev_priv->oa_pmu.specific_ctx = NULL;
+ spin_unlock_irqrestore(&dev_priv->oa_pmu.lock, lock_flags);
+
+ /* Don't let the compiler start resetting OA, PM and clock
+ * gating state before we've stopped update_oacontrol()
+ */
+ barrier();
+
+ BUG_ON(dev_priv->oa_pmu.exclusive_event != event);
+ dev_priv->oa_pmu.exclusive_event = NULL;
+
+ oa_buffer_destroy(dev_priv);
+
+ I915_WRITE(GEN6_UCGCTL1, (I915_READ(GEN6_UCGCTL1) &
+ ~GEN6_CSUNIT_CLOCK_GATE_DISABLE));
+ I915_WRITE(GEN7_MISCCPCTL, (I915_READ(GEN7_MISCCPCTL) |
+ GEN7_DOP_CLOCK_GATE_ENABLE));
+
+ I915_WRITE(GDT_CHICKEN_BITS, (I915_READ(GDT_CHICKEN_BITS) &
+ ~GT_NOA_ENABLE));
+
+ intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+ intel_runtime_pm_put(dev_priv);
+ dev_priv->oa_pmu.event_state = I915_OA_EVENT_INIT;
+ }
+}
+
+void i915_oa_rcs_event_destroy_work(struct work_struct *__work)
+{
+ struct drm_i915_private *dev_priv =
+ container_of(__work, typeof(*dev_priv),
+ oa_pmu.work_event_destroy);
+ unsigned long lock_flags;
+ int ret;
+
+ /* Stop updating oacontrol via _oa_context_pin_[un]notify()
+ * TODO: Is this reqd here?
+ */
spin_lock_irqsave(&dev_priv->oa_pmu.lock, lock_flags);
dev_priv->oa_pmu.specific_ctx = NULL;
spin_unlock_irqrestore(&dev_priv->oa_pmu.lock, lock_flags);
- /* Don't let the compiler start resetting OA, PM and clock gating
- * state before we've stopped update_oacontrol()
+ /* Don't let the compiler start resetting OA, PM and clock
+ * gating state before we've stopped update_oacontrol()
*/
barrier();
+ ret = i915_oa_rcs_wait_gpu(dev_priv);
+ if (ret)
+ goto out;
+
+ i915_oa_rcs_release_request_ref(dev_priv);
+
+out:
+ /* Disable OA unit */
+ I915_WRITE(GEN7_OACONTROL, 0);
+
+ /* The periodic OA buffer has to be destroyed here, since
+ * this can be done only after OA unit is disabled. There is no active
+ * reference tracking mechanism for periodic OA buffer. So we can only
+ * dereference it in the worker after we've disabled OA unit (which we
+ * can do after we're sure to have completed the in flight GPU cmds)
+ */
+ /* TODO: Once we have callbacks in place on completion of request
+ * (i.e. when retire-notification patches land), we can take the active
+ * reference on LRI request(submitted for disabling OA) during event
+ * stop/destroy, and perform these actions, in the callback instead of
+ * work fn
+ */
+
+ oa_buffer_destroy(dev_priv);
+
+ spin_lock_irqsave(&dev_priv->oa_pmu.lock, lock_flags);
+
I915_WRITE(GEN6_UCGCTL1, (I915_READ(GEN6_UCGCTL1) &
~GEN6_CSUNIT_CLOCK_GATE_DISABLE));
I915_WRITE(GEN7_MISCCPCTL, (I915_READ(GEN7_MISCCPCTL) |
@@ -335,16 +461,10 @@ static void i915_oa_event_destroy(struct perf_event *event)
I915_WRITE(GDT_CHICKEN_BITS, (I915_READ(GDT_CHICKEN_BITS) &
~GT_NOA_ENABLE));
- if (dev_priv->oa_pmu.multiple_ctx_mode)
- oa_rcs_buffer_destroy(dev_priv);
-
- oa_buffer_destroy(dev_priv);
-
- BUG_ON(dev_priv->oa_pmu.exclusive_event != event);
- dev_priv->oa_pmu.exclusive_event = NULL;
-
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
intel_runtime_pm_put(dev_priv);
+ dev_priv->oa_pmu.event_state = I915_OA_EVENT_INIT;
+ spin_unlock_irqrestore(&dev_priv->oa_pmu.lock, lock_flags);
}
static int alloc_obj(struct drm_i915_private *dev_priv,
@@ -625,7 +745,8 @@ static int i915_oa_event_init(struct perf_event *event)
* counter snapshots and marshal to the appropriate client
* we currently only allow exclusive access */
spin_lock_irqsave(&dev_priv->oa_pmu.lock, lock_flags);
- if (dev_priv->oa_pmu.oa_buffer.obj) {
+ if (dev_priv->oa_pmu.oa_buffer.obj ||
+ dev_priv->oa_pmu.event_state != I915_OA_EVENT_INIT) {
spin_unlock_irqrestore(&dev_priv->oa_pmu.lock, lock_flags);
return -EBUSY;
}
@@ -790,7 +911,8 @@ static void update_oacontrol(struct drm_i915_private *dev_priv)
{
BUG_ON(!spin_is_locked(&dev_priv->oa_pmu.lock));
- if (dev_priv->oa_pmu.event_active) {
+ if ((dev_priv->oa_pmu.event_state == I915_OA_EVENT_STARTED) ||
+ (dev_priv->oa_pmu.event_state == I915_OA_EVENT_STOP_IN_PROGRESS)) {
unsigned long ctx_id = 0;
bool pinning_ok = false;
@@ -900,7 +1022,7 @@ static void i915_oa_event_start(struct perf_event *event, int flags)
spin_lock_irqsave(&dev_priv->oa_pmu.lock, lock_flags);
- dev_priv->oa_pmu.event_active = true;
+ dev_priv->oa_pmu.event_state = I915_OA_EVENT_STARTED;
update_oacontrol(dev_priv);
/* Reset the head ptr to ensure we don't forward reports relating
@@ -927,14 +1049,6 @@ static void i915_oa_event_stop(struct perf_event *event, int flags)
container_of(event->pmu, typeof(*dev_priv), oa_pmu.pmu);
unsigned long lock_flags;
- spin_lock_irqsave(&dev_priv->oa_pmu.lock, lock_flags);
-
- dev_priv->oa_pmu.event_active = false;
- update_oacontrol(dev_priv);
-
- mmiowb();
- spin_unlock_irqrestore(&dev_priv->oa_pmu.lock, lock_flags);
-
if (event->attr.sample_period) {
hrtimer_cancel(&dev_priv->oa_pmu.timer);
if (dev_priv->oa_pmu.multiple_ctx_mode)
@@ -942,6 +1056,23 @@ static void i915_oa_event_stop(struct perf_event *event, int flags)
flush_oa_snapshots(dev_priv, false, U64_MAX);
}
+ if (dev_priv->oa_pmu.multiple_ctx_mode) {
+ struct i915_oa_rcs_node *entry;
+
+ spin_lock_irqsave(&dev_priv->oa_pmu.lock, lock_flags);
+
+ dev_priv->oa_pmu.event_state = I915_OA_EVENT_STOP_IN_PROGRESS;
+ list_for_each_entry(entry, &dev_priv->oa_pmu.node_list, head)
+ entry->discard = true;
+
+ spin_unlock_irqrestore(&dev_priv->oa_pmu.lock, lock_flags);
+ } else {
+ spin_lock_irqsave(&dev_priv->oa_pmu.lock, lock_flags);
+ dev_priv->oa_pmu.event_state = I915_OA_EVENT_STOPPED;
+ update_oacontrol(dev_priv);
+ mmiowb();
+ spin_unlock_irqrestore(&dev_priv->oa_pmu.lock, lock_flags);
+ }
event->hw.state = PERF_HES_STOPPED;
}
@@ -1075,10 +1206,13 @@ void i915_oa_pmu_register(struct drm_device *dev)
i915->oa_pmu.timer.function = hrtimer_sample;
INIT_WORK(&i915->oa_pmu.work_timer, forward_oa_rcs_snapshots_work);
+ INIT_WORK(&i915->oa_pmu.work_event_destroy,
+ i915_oa_rcs_event_destroy_work);
spin_lock_init(&i915->oa_pmu.lock);
i915->oa_pmu.pmu.capabilities = PERF_PMU_CAP_IS_DEVICE;
+ i915->oa_pmu.event_state = I915_OA_EVENT_INIT;
/* Effectively disallow opening an event with a specific pid
* since we aren't interested in processes running on the cpu...
@@ -1105,8 +1239,10 @@ void i915_oa_pmu_unregister(struct drm_device *dev)
if (i915->oa_pmu.pmu.event_init == NULL)
return;
- if (i915->oa_pmu.multiple_ctx_mode)
+ if (i915->oa_pmu.multiple_ctx_mode) {
cancel_work_sync(&i915->oa_pmu.work_timer);
+ cancel_work_sync(&i915->oa_pmu.work_event_destroy);
+ }
unregister_sysctl_table(i915->oa_pmu.sysctl_header);
--
1.8.5.1
More information about the Intel-gfx
mailing list