[Intel-gfx] [PATCH v2] drm/i915: Use two 32bit reads for select 64bit REG_READ ioctls
Chris Wilson
chris at chris-wilson.co.uk
Wed Jul 15 06:17:06 PDT 2015
Since the hardware sometimes mysteriously totally flummoxes the 64bit
read of a 64bit register when read using a single instruction, split the
read into two instructions. Since the read here is of automatically
incrementing timestamp counters, we also have to be very careful in
order to make sure that it does not increment between the two
instructions.
However, since userspace tried to workaround this issue and so enshrined
this ABI for a broken hardware read and in the process neglected that
the read only fails in some environments, we have to introduce a new
uABI flag for userspace to request the 2x32 bit accurate read of the
timestamp.
Reported-by: Karol Herbst <freedesktop at karolherbst.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91317
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: MichaĆ Winiarski <michal.winiarski at intel.com>
Cc: stable at vger.kernel.org
---
drivers/gpu/drm/i915/intel_uncore.c | 26 +++++++++++++++++++-------
1 file changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
index 2c477663d378..925b02d1125f 100644
--- a/drivers/gpu/drm/i915/intel_uncore.c
+++ b/drivers/gpu/drm/i915/intel_uncore.c
@@ -1310,10 +1310,12 @@ int i915_reg_read_ioctl(struct drm_device *dev,
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_reg_read *reg = data;
struct register_whitelist const *entry = whitelist;
+ unsigned size;
+ u64 offset;
int i, ret = 0;
for (i = 0; i < ARRAY_SIZE(whitelist); i++, entry++) {
- if (entry->offset == reg->offset &&
+ if (entry->offset == (reg->offset & -(1 << entry->size)) &&
(1 << INTEL_INFO(dev)->gen & entry->gen_bitmask))
break;
}
@@ -1321,23 +1323,33 @@ int i915_reg_read_ioctl(struct drm_device *dev,
if (i == ARRAY_SIZE(whitelist))
return -EINVAL;
+ /* We use the low bits to encode extra flags as the register should
+ * be naturally aligned (and that aren't limit the available flags
+ * for that register).
+ */
+ offset = entry->offset;
+ size = entry->size;
+ size |= reg->offset ^ offset;
+
intel_runtime_pm_get(dev_priv);
- switch (entry->size) {
+ switch (size) {
+ case 8 | 1:
+ reg->val = I915_READ64_2x32(offset, offset+4);
+ break;
case 8:
- reg->val = I915_READ64(reg->offset);
+ reg->val = I915_READ64(offset);
break;
case 4:
- reg->val = I915_READ(reg->offset);
+ reg->val = I915_READ(offset);
break;
case 2:
- reg->val = I915_READ16(reg->offset);
+ reg->val = I915_READ16(offset);
break;
case 1:
- reg->val = I915_READ8(reg->offset);
+ reg->val = I915_READ8(offset);
break;
default:
- MISSING_CASE(entry->size);
ret = -EINVAL;
goto out;
}
--
2.1.4
More information about the Intel-gfx
mailing list