[Intel-gfx] [PATCH] igt/kms_plane_scaling : plane scaling enhancement and plane support for bxt
Thomas Wood
thomas.wood at intel.com
Fri Jul 17 04:36:10 PDT 2015
On 17 July 2015 at 09:34, Nabendu Maiti <nabendu.bikash.maiti at intel.com> wrote:
> 1) Added more overlay plane support for BXT.
> 2) Added and enhanced scaler test cases for additional planes.
Please split the various separate changes in different patches.
The i-g-t tag should also appear in the subject prefix rather than the
subject tag. (i.e. use --subject-prefix="PATCH i-g-t" or git config
format.subjectprefix "PATCH i-g-t").
>
> Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti at intel.com>
> ---
> lib/igt_fb.c | 40 ++++++++++++++++++++++++
> lib/igt_fb.h | 1 +
> lib/igt_kms.c | 1 +
> lib/igt_kms.h | 3 +-
> tests/kms_plane_scaling.c | 79 ++++++++++++++++++++++++++++++++++++++++++++---
> 5 files changed, 118 insertions(+), 6 deletions(-)
>
> diff --git a/lib/igt_fb.c b/lib/igt_fb.c
> index 134dbd2..e61b762 100644
> --- a/lib/igt_fb.c
> +++ b/lib/igt_fb.c
> @@ -393,6 +393,46 @@ void igt_paint_image(cairo_t *cr, const char *filename,
> }
>
> /**
> + * igt_paint_cross_ruler:
> + * @cr: cairo drawing context
> + * @dst_width: width of the horizontal ruler
> + * @dst_height: height of the vertical ruler
> + *
> + * This function can be used to draw a cross ruler on a frame buffer.
> + */
> +void
> +igt_paint_cross_ruler(cairo_t *cr, uint16_t w, uint16_t h)
Other cairo functions use int rather than uint16_t for width and
height, so int should be sufficient here too, at least for
consistency.
> +{
> +
> + uint16_t i;
> +
> + /* Paint corner markers */
> + paint_marker(cr, 0, 0);
> + paint_marker(cr, w, 0);
> + paint_marker(cr, 0, h);
> + paint_marker(cr, w, h);
> +
> +
> + cairo_move_to(cr, w/2, 0);
> + cairo_line_to(cr, w/2, h);
> +
> + cairo_set_source_rgb(cr, 4, 1, 10);
> + cairo_move_to(cr, 0, h/2);
> + cairo_line_to(cr, w, h/2 );
> + cairo_stroke(cr);
> +
> + cairo_set_source_rgb(cr, 2, 5, 1);
> + cairo_set_line_width(cr, 2);
> + cairo_stroke(cr);
> + cairo_stroke_preserve(cr);
> + for (i = 0; i < w; i +=200)
> + paint_marker(cr, i, h/2);
> +
> + for (i = 0; i < h; i +=200)
> + paint_marker(cr, w/2, i);
> +}
> +
> +/**
> * igt_create_fb_with_bo_size:
> * @fd: open i915 drm file descriptor
> * @width: width of the framebuffer in pixel
> diff --git a/lib/igt_fb.h b/lib/igt_fb.h
> index a07acd2..cf6e7e3 100644
> --- a/lib/igt_fb.h
> +++ b/lib/igt_fb.h
> @@ -98,6 +98,7 @@ void igt_write_fb_to_png(int fd, struct igt_fb *fb, const char *filename);
> int igt_cairo_printf_line(cairo_t *cr, enum igt_text_align align,
> double yspacing, const char *fmt, ...)
> __attribute__((format (printf, 4, 5)));
> +void igt_paint_cross_ruler(cairo_t *cr, uint16_t w, uint16_t h);
>
> /* helpers to handle drm fourcc codes */
> uint32_t igt_bpp_depth_to_drm_format(int bpp, int depth);
> diff --git a/lib/igt_kms.c b/lib/igt_kms.c
> index 0bb16b4..781ffa5 100644
> --- a/lib/igt_kms.c
> +++ b/lib/igt_kms.c
> @@ -213,6 +213,7 @@ const char *kmstest_plane_name(enum igt_plane plane)
> [IGT_PLANE_1] = "plane1",
> [IGT_PLANE_2] = "plane2",
> [IGT_PLANE_3] = "plane3",
> + [IGT_PLANE_4] = "plane4",
> [IGT_PLANE_CURSOR] = "cursor",
> };
>
> diff --git a/lib/igt_kms.h b/lib/igt_kms.h
> index 09c08aa..14c8b28 100644
> --- a/lib/igt_kms.h
> +++ b/lib/igt_kms.h
> @@ -53,6 +53,7 @@ enum igt_plane {
> IGT_PLANE_PRIMARY = IGT_PLANE_1,
> IGT_PLANE_2,
> IGT_PLANE_3,
> + IGT_PLANE_4,
> IGT_PLANE_CURSOR,
> };
>
> @@ -205,7 +206,7 @@ struct igt_pipe {
> igt_display_t *display;
> enum pipe pipe;
> bool enabled;
> -#define IGT_MAX_PLANES 4
> +#define IGT_MAX_PLANES 5
> int n_planes;
> igt_plane_t planes[IGT_MAX_PLANES];
> uint64_t background; /* Background color MSB BGR 16bpc LSB */
> diff --git a/tests/kms_plane_scaling.c b/tests/kms_plane_scaling.c
> index 00db5cb..8e3d559 100644
> --- a/tests/kms_plane_scaling.c
> +++ b/tests/kms_plane_scaling.c
> @@ -23,7 +23,7 @@
> */
>
> #include <math.h>
> -
> +#include <cairo.h>
cairo is already included via igt_kms.h and igt_fb.h.
> #include "drmtest.h"
> #include "igt_debugfs.h"
> #include "igt_kms.h"
> @@ -48,9 +48,11 @@ typedef struct {
> struct igt_fb fb1;
> struct igt_fb fb2;
> struct igt_fb fb3;
> + struct igt_fb fb4;
> int fb_id1;
> int fb_id2;
> int fb_id3;
> + int fb_id4;
>
> igt_plane_t *plane1;
> igt_plane_t *plane2;
> @@ -61,6 +63,22 @@ typedef struct {
> #define FILE_NAME "1080p-left.png"
>
> static void
> +paint_plane_ID(data_t *d, struct igt_fb *fb, igt_plane_t *plane)
> +{
> + cairo_t *cr;
> +
> + cr = igt_get_cairo_ctx(d->drm_fd, fb);
> + cairo_move_to(cr, (fb->width/5),
> + (fb->height / 5));
> + cairo_set_font_size(cr, 25);
> + igt_cairo_printf_line(cr, align_hcenter, 10, "PIPE:PLANE:");
> + cairo_set_font_size(cr, 30);
> + igt_cairo_printf_line(cr, align_hcenter, 40, " %d:%d",
> + plane->pipe->pipe, plane->index);
> + cairo_destroy(cr);
> +}
> +
> +static void
> paint_color(data_t *d, struct igt_fb *fb, uint16_t w, uint16_t h)
> {
> cairo_t *cr;
> @@ -71,12 +89,14 @@ paint_color(data_t *d, struct igt_fb *fb, uint16_t w, uint16_t h)
> }
>
> static void
> -paint_image(data_t *d, struct igt_fb *fb, uint16_t w, uint16_t h)
> +paint_image(const char *filename, data_t *d, struct igt_fb *fb,
> + uint16_t w, uint16_t h)
What is the purpose of the new filename parameter? It always appears
to be set to to the same value (FILE_NAME) as used previously in the
vall to igt_paint_image.
> {
> cairo_t *cr;
>
> cr = igt_get_cairo_ctx(d->drm_fd, fb);
> - igt_paint_image(cr, FILE_NAME, 0, 0, w, h);
> + igt_paint_image(cr, filename, 0, 0, w, h);
> + igt_paint_cross_ruler(cr, w, h);
> cairo_destroy(cr);
> }
>
> @@ -106,6 +126,7 @@ static void prepare_crtc(data_t *data, igt_output_t *output, enum pipe pipe,
> igt_assert(data->fb_id1);
>
> paint_color(data, &data->fb1, mode->hdisplay, mode->vdisplay);
> + paint_plane_ID(data, &data->fb1, plane);
>
> /*
> * We always set the primary plane to actually enable the pipe as
> @@ -154,7 +175,10 @@ static void cleanup_crtc(data_t *data, igt_output_t *output, igt_plane_t *plane)
> igt_remove_fb(data->drm_fd, &data->fb3);
> data->fb_id3 = 0;
> }
> -
> + if (data->fb_id4) {
> + igt_remove_fb(data->drm_fd, &data->fb4);
> + data->fb_id4 = 0;
> + }
> if (!plane->is_primary) {
> igt_plane_t *primary;
>
> @@ -235,7 +259,7 @@ static void test_plane_scaling(data_t *d)
> LOCAL_I915_FORMAT_MOD_X_TILED, /* tiled */
> &d->fb2);
> igt_assert(d->fb_id2);
> - paint_image(d, &d->fb2, d->fb2.width, d->fb2.height);
> + paint_image(FILE_NAME, d, &d->fb2, d->fb2.width, d->fb2.height);
>
> d->fb_id3 = igt_create_fb(d->drm_fd,
> mode->hdisplay, mode->vdisplay,
> @@ -245,6 +269,17 @@ static void test_plane_scaling(data_t *d)
> igt_assert(d->fb_id3);
> paint_color(d, &d->fb3, mode->hdisplay, mode->vdisplay);
>
> + if ((display->pipes[pipe].n_planes > 4) && (pipe != PIPE_C)) {
> + d->fb_id4 = igt_create_fb(d->drm_fd,
> + d->image_w, d->image_h,
> + DRM_FORMAT_XRGB8888,
> + LOCAL_I915_FORMAT_MOD_X_TILED, /*tiled*/
> + &d->fb4);
> + igt_assert(d->fb_id4);
> + paint_image(FILE_NAME, d,&d->fb4, d->fb4.width,
> + d->fb4.height);
> + }
> +
> /* Set up display with plane 1 */
> d->plane1 = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> prepare_crtc(d, output, pipe, d->plane1, mode, COMMIT_UNIVERSAL);
> @@ -268,6 +303,7 @@ static void test_plane_scaling(data_t *d)
> /* Set up fb2->plane2 mapping. */
> d->plane2 = igt_output_get_plane(output, IGT_PLANE_2);
> igt_plane_set_fb(d->plane2, &d->fb2);
> + paint_plane_ID(d, &d->fb2, d->plane2);
>
> /* 2nd plane windowed */
> igt_fb_set_position(&d->fb2, d->plane2, 100, 100);
> @@ -293,6 +329,7 @@ static void test_plane_scaling(data_t *d)
> igt_display_commit2(display, COMMIT_UNIVERSAL);
>
> if (primary_plane_scaling) {
> +
> /* Primary plane up scaling */
> igt_fb_set_position(&d->fb1, d->plane1, 100, 100);
> igt_fb_set_size(&d->fb1, d->plane1, 500, 500);
> @@ -304,6 +341,7 @@ static void test_plane_scaling(data_t *d)
> /* Set up fb3->plane3 mapping. */
> d->plane3 = igt_output_get_plane(output, IGT_PLANE_3);
> igt_plane_set_fb(d->plane3, &d->fb3);
> + paint_plane_ID(d, &d->fb3, d->plane3);
>
> /* 3rd plane windowed - no scaling */
> igt_fb_set_position(&d->fb3, d->plane3, 100, 100);
> @@ -324,6 +362,35 @@ static void test_plane_scaling(data_t *d)
> igt_plane_set_size(d->plane3, mode->hdisplay-300, mode->vdisplay-300);
> igt_display_commit2(display, COMMIT_UNIVERSAL);
>
> + if ((display->pipes[pipe].n_planes > 4) && (pipe != PIPE_C)) {
> +
> + /* Set up fb4->plane4 mapping. */
> + d->plane4 = igt_output_get_plane(output, IGT_PLANE_4);
> + igt_plane_set_fb(d->plane4, &d->fb4);
> + paint_plane_ID(d, &d->fb4, d->plane4);
> +
> + /* 4th plane windowed - no scaling */
> + igt_fb_set_position(&d->fb4, d->plane4, 50, 200);
> + igt_fb_set_size(&d->fb4, d->plane4, d->fb4.width-300, d->fb4.height-300);
> + igt_plane_set_position(d->plane4, 100, 100);
> + igt_plane_set_size(d->plane4, d->fb4.width-300, d->fb4.height-300);
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> +
> + /* Switch scaler from plane 3 to plane 4 */
> + igt_fb_set_position(&d->fb3, d->plane3, 100, 100);
> + igt_fb_set_size(&d->fb3, d->plane3, d->fb3.width-300, d->fb3.height-300);
> + igt_plane_set_position(d->plane3, 100, 100);
> + igt_plane_set_size(d->plane3, d->fb3.width-300, d->fb3.height-300);
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> +
> + igt_fb_set_position(&d->fb4, d->plane4, 10, 10);
> + igt_fb_set_size(&d->fb4, d->plane4, d->fb4.width-50, d->fb4.height-50);
> + igt_plane_set_position(d->plane4, 10, 10);
> + igt_plane_set_size(d->plane4, mode->hdisplay-300, mode->vdisplay-300);
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> +
> + }
> +
> if (primary_plane_scaling) {
> /* Switch scaler from plane 1 to plane 2 */
> igt_fb_set_position(&d->fb1, d->plane1, 0, 0);
> @@ -341,6 +408,8 @@ static void test_plane_scaling(data_t *d)
> /* back to single plane mode */
> igt_plane_set_fb(d->plane2, NULL);
> igt_plane_set_fb(d->plane3, NULL);
> + if (d->plane4)
> + igt_plane_set_fb(d->plane4, NULL);
> igt_display_commit2(display, COMMIT_UNIVERSAL);
>
> valid_tests++;
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list