[Intel-gfx] [PATCH 1/3] drm/i915: combine i9xx_get_hpd_pins and pch_get_hpd_pins
Sivakumar Thulasimani
sivakumar.thulasimani at intel.com
Wed Jul 22 01:13:49 PDT 2015
On 7/21/2015 11:28 PM, Imre Deak wrote:
> On Tue, 2015-07-21 at 13:50 +0530, Sivakumar Thulasimani wrote:
>> On 7/21/2015 3:13 AM, Imre Deak wrote:
>>> These functions are quite similar, so combine them with the use of a new
>>> argument for a function that detects long pulses. This will be also
>>> needed by an upcoming patch adding support for BXT long pulse detection.
>>>
>>> No functional change.
>>>
>>> Signed-off-by: Imre Deak <imre.deak at intel.com>
>>> ---
>>> drivers/gpu/drm/i915/i915_irq.c | 54 ++++++++++++++---------------------------
>>> 1 file changed, 18 insertions(+), 36 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
>>> index a6fbe64..306de78 100644
>>> --- a/drivers/gpu/drm/i915/i915_irq.c
>>> +++ b/drivers/gpu/drm/i915/i915_irq.c
>>> @@ -1256,9 +1256,10 @@ static bool i9xx_port_hotplug_long_detect(enum port port, u32 val)
>>> }
>>>
>>> /* Get a bit mask of pins that have triggered, and which ones may be long. */
>>> -static void pch_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
>>> +static void intel_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
>>> u32 hotplug_trigger, u32 dig_hotplug_reg,
>>> - const u32 hpd[HPD_NUM_PINS])
>>> + const u32 hpd[HPD_NUM_PINS],
>>> + bool long_pulse_detect(enum port port, u32 val))
>>> {
>>> enum port port;
>>> int i;
>>> @@ -1276,7 +1277,7 @@ static void pch_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
>>> *pin_mask |= BIT(i);
>>>
>>> port = intel_hpd_pin_to_port(i);
>>> - if (pch_port_hotplug_long_detect(port, dig_hotplug_reg))
>>> + if (long_pulse_detect(port, dig_hotplug_reg))
>>> *long_mask |= BIT(i);
>>> }
>>>
>>> @@ -1285,34 +1286,6 @@ static void pch_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
>>>
>>> }
>>>
>>> -/* Get a bit mask of pins that have triggered, and which ones may be long. */
>>> -static void i9xx_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
>>> - u32 hotplug_trigger, const u32 hpd[HPD_NUM_PINS])
>>> -{
>>> - enum port port;
>>> - int i;
>>> -
>>> - *pin_mask = 0;
>>> - *long_mask = 0;
>>> -
>>> - if (!hotplug_trigger)
>>> - return;
>>> -
>>> - for_each_hpd_pin(i) {
>>> - if ((hpd[i] & hotplug_trigger) == 0)
>>> - continue;
>>> -
>>> - *pin_mask |= BIT(i);
>>> -
>>> - port = intel_hpd_pin_to_port(i);
>>> - if (i9xx_port_hotplug_long_detect(port, hotplug_trigger))
>>> - *long_mask |= BIT(i);
>>> - }
>>> -
>>> - DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x, pins 0x%08x\n",
>>> - hotplug_trigger, *pin_mask);
>>> -}
>>> -
>>> static void gmbus_irq_handler(struct drm_device *dev)
>>> {
>>> struct drm_i915_private *dev_priv = dev->dev_private;
>>> @@ -1550,7 +1523,9 @@ static void i9xx_hpd_irq_handler(struct drm_device *dev)
>>> if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
>>> u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_G4X;
>>>
>>> - i9xx_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, hpd_status_g4x);
>>> + intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
>>> + hotplug_trigger, hpd_status_g4x,
>>> + i9xx_port_hotplug_long_detect);
>>> intel_hpd_irq_handler(dev, pin_mask, long_mask);
>>>
>>> if (hotplug_status & DP_AUX_CHANNEL_MASK_INT_STATUS_G4X)
>>> @@ -1558,7 +1533,9 @@ static void i9xx_hpd_irq_handler(struct drm_device *dev)
>>> } else {
>>> u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915;
>>>
>>> - i9xx_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, hpd_status_i915);
>>> + intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
>>> + hotplug_trigger, hpd_status_g4x,
>>> + i9xx_port_hotplug_long_detect);
>>> intel_hpd_irq_handler(dev, pin_mask, long_mask);
>>> }
>>> }
>>> @@ -1664,7 +1641,9 @@ static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
>>> dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
>>> I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
>>>
>>> - pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, dig_hotplug_reg, hpd_ibx);
>>> + intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
>>> + dig_hotplug_reg, hpd_ibx,
>>> + pch_port_hotplug_long_detect);
>>> intel_hpd_irq_handler(dev, pin_mask, long_mask);
>>>
>>> if (pch_iir & SDE_AUDIO_POWER_MASK) {
>>> @@ -1763,7 +1742,9 @@ static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
>>> dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
>>> I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
>>>
>>> - pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, dig_hotplug_reg, hpd_cpt);
>>> + intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
>>> + dig_hotplug_reg, hpd_cpt,
>>> + pch_port_hotplug_long_detect);
>>> intel_hpd_irq_handler(dev, pin_mask, long_mask);
>>>
>>> if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) {
>>> @@ -1979,7 +1960,8 @@ static void bxt_hpd_handler(struct drm_device *dev, uint32_t iir_status)
>>> /* Clear sticky bits in hpd status */
>>> I915_WRITE(BXT_HOTPLUG_CTL, hp_control);
>>>
>>> - pch_get_hpd_pins(&pin_mask, &long_mask, hp_trigger, hp_control, hpd_bxt);
>>> + intel_get_hpd_pins(&pin_mask, &long_mask, hp_trigger, hp_control,
>>> + hpd_bxt, pch_port_hotplug_long_detect);
>>> intel_hpd_irq_handler(dev, pin_mask, long_mask);
>>> }
>>>
>> a what if question :), before this change only intel_hpd_irq_handler was
>> platform independent and
>> it was in intel_hotplug.c file. Now we have one more function which is
>> (i am assuming) platform independent
>> and is always called before intel_hpd_irq_handler.
>>
>> can we move the intel_get_hpd_pins to intel_hotplug.c by renmaing it as
>> intel_hpd_get_pins & call the
>> intel_hpd_irq_handler function at the end of this new function ?
> Yes, factoring out intel_get_hpd_pins() and intel_hpd_irq_handler() into
> a new function is a good idea. I think it's best done as follow-up
> though, so maybe you could do this after this patchset is merged?
>
> --Imre
>
Sure :) i'll take it up post this gets merged.
--
regards,
Sivakumar
More information about the Intel-gfx
mailing list