[Intel-gfx] [PATCH 15/18] drm/i915/skl: Making DC6 entry is the last call in suspend flow.

[Animesh Manna]

Mmio register access after dc6/dc5 entry is causing the
system hang, so enabling dc6 as the last call in suspend flow.

Cc: Damien Lespiau <damien.lespiau at intel.com>
Cc: Imre Deak <imre.deak at intel.com>
Cc: Sunil Kamath <sunil.kamath at intel.com>
Signed-off-by: Animesh Manna <animesh.manna at intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju at intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj at intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c         |  6 ++++++
 drivers/gpu/drm/i915/intel_drv.h        |  2 ++
 drivers/gpu/drm/i915/intel_runtime_pm.c | 19 +++++++------------
 3 files changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index ddf8a25..77b35fd 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -995,6 +995,9 @@ static int i915_pm_resume(struct device *dev)
 
 static int skl_suspend_complete(struct drm_i915_private *dev_priv)
 {
+	if (dev_priv->csr.dmc_payload)
+		skl_enable_dc6(dev_priv);
+
 	skl_uninit_cdclk(dev_priv);
 
 	return 0;
@@ -1041,6 +1044,9 @@ static int bxt_resume_prepare(struct drm_i915_private *dev_priv)
 
 static int skl_resume_prepare(struct drm_i915_private *dev_priv)
 {
+	if (dev_priv->csr.dmc_payload)
+		skl_disable_dc6(dev_priv);
+
 	skl_init_cdclk(dev_priv);
 	intel_csr_load_program(dev_priv);
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 644286f..0d13f50 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1117,6 +1117,8 @@ void bxt_enable_dc9(struct drm_i915_private *dev_priv);
 void bxt_disable_dc9(struct drm_i915_private *dev_priv);
 void skl_init_cdclk(struct drm_i915_private *dev_priv);
 void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
+void skl_enable_dc6(struct drm_i915_private *dev_priv);
+void skl_disable_dc6(struct drm_i915_private *dev_priv);
 void intel_dp_get_m_n(struct intel_crtc *crtc,
 		      struct intel_crtc_state *pipe_config);
 void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n);
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index a5059e8..ddae00e 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -540,7 +540,7 @@ static void assert_can_disable_dc6(struct drm_i915_private *dev_priv)
 		"DC6 already programmed to be disabled.\n");
 }
 
-static void skl_enable_dc6(struct drm_i915_private *dev_priv)
+void skl_enable_dc6(struct drm_i915_private *dev_priv)
 {
 	uint32_t val;
 
@@ -557,7 +557,7 @@ static void skl_enable_dc6(struct drm_i915_private *dev_priv)
 	POSTING_READ(DC_STATE_EN);
 }
 
-static void skl_disable_dc6(struct drm_i915_private *dev_priv)
+void skl_disable_dc6(struct drm_i915_private *dev_priv)
 {
 	uint32_t val;
 
@@ -618,10 +618,10 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
 				!I915_READ(HSW_PWR_WELL_BIOS),
 				"Invalid for power well status to be enabled, unless done by the BIOS, \
 				when request is to disable!\n");
-			if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
-				power_well->data == SKL_DISP_PW_2) {
+			if (power_well->data == SKL_DISP_PW_2) {
+				if (GEN9_ENABLE_DC5(dev))
+					gen9_disable_dc5(dev_priv);
 				if (SKL_ENABLE_DC6(dev)) {
-					skl_disable_dc6(dev_priv);
 					/*
 					 * DDI buffer programming unnecessary during driver-load/resume
 					 * as it's already done during modeset initialization then.
@@ -629,8 +629,6 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
 					 */
 					if (!dev_priv->power_domains.initializing)
 						intel_prepare_ddi(dev);
-				} else {
-					gen9_disable_dc5(dev_priv);
 				}
 			}
 			I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
@@ -650,12 +648,9 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
 			POSTING_READ(HSW_PWR_WELL_DRIVER);
 			DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
 
-			if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
-				power_well->data == SKL_DISP_PW_2) {
+			if (power_well->data == SKL_DISP_PW_2) {
 				flush_work(&dev_priv->csr.work);
-				if (SKL_ENABLE_DC6(dev))
-					skl_enable_dc6(dev_priv);
-				else
+				if (GEN9_ENABLE_DC5(dev))
 					gen9_enable_dc5(dev_priv);
 			}
 		}
-- 
2.0.2