[Intel-gfx] [PATCH v4 08/27] drm/i915: Use crtc_state->active instead of crtc_state->enable
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Mon Jun 1 03:49:52 PDT 2015
crtc_state->enable means a crtc is configured, but it may be turned
off for dpms. Until the commit "use intel_crtc_control everywhere"
crtc_state->active was not updated on crtc off, but now
crtc_state->active should be used for tracking whether a crtc is
scanning out or not.
A few commits from now dpms will be handled by calling
intel_set_mode with a different value for crtc_state->active,
which causes a crtc to turn on or off.
At this point crtc->active should mirror crtc_state->active,
so some paranoia from the crtc_disable functions can be removed.
intel_set_mode_setup_plls still checks for ->enable, because all
resources that are needed have to be calculated, else
dpms changes may not succeed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper at intel.com>
---
drivers/gpu/drm/i915/i915_irq.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 44 ++++++++++++++++++------------------
2 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index eb52a039d628..dadd586f0527 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -796,7 +796,7 @@ static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
return -EINVAL;
}
- if (!crtc->state->enable) {
+ if (!crtc->state->active) {
DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
return -EBUSY;
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b9f071ead7ed..5645bfb08776 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4629,7 +4629,7 @@ static void intel_crtc_load_lut(struct drm_crtc *crtc)
bool reenable_ips = false;
/* The clocks have to be on to load the palette. */
- if (!crtc->state->enable || !intel_crtc->active)
+ if (!crtc->state->active)
return;
if (HAS_GMCH_DISPLAY(dev_priv->dev)) {
@@ -4845,9 +4845,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
if (intel_crtc->config->has_pch_encoder)
@@ -4951,9 +4949,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
if (intel_crtc_to_shared_dpll(intel_crtc))
@@ -5055,7 +5051,7 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
int pipe = intel_crtc->pipe;
u32 reg, temp;
- if (!intel_crtc->active)
+ if (WARN_ON(!intel_crtc->active))
return;
for_each_encoder_on_crtc(dev, crtc, encoder)
@@ -5118,7 +5114,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
struct intel_encoder *encoder;
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
- if (!intel_crtc->active)
+ if (WARN_ON(!intel_crtc->active))
return;
for_each_encoder_on_crtc(dev, crtc, encoder) {
@@ -5924,7 +5920,7 @@ static int valleyview_modeset_global_pipes(struct drm_atomic_state *state)
/* add all active pipes to the state */
for_each_crtc(state->dev, crtc) {
- if (!crtc->state->enable)
+ if (!crtc->state->active)
continue;
crtc_state = drm_atomic_get_crtc_state(state, crtc);
@@ -5934,7 +5930,7 @@ static int valleyview_modeset_global_pipes(struct drm_atomic_state *state)
/* disable/enable all currently active pipes while we change cdclk */
for_each_crtc_in_state(state, crtc, crtc_state, i)
- if (crtc_state->enable)
+ if (crtc_state->active)
crtc_state->mode_changed = true;
return 0;
@@ -6022,9 +6018,7 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
int pipe = intel_crtc->pipe;
bool is_dsi;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
@@ -6100,9 +6094,7 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
i9xx_set_pll_dividers(intel_crtc);
@@ -6162,7 +6154,7 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- if (!intel_crtc->active)
+ if (WARN_ON(!intel_crtc->active))
return;
/*
@@ -12012,7 +12004,7 @@ intel_modeset_update_state(struct drm_atomic_state *state)
if (!crtc_state || !needs_modeset(crtc->state))
continue;
- if (crtc->state->enable) {
+ if (crtc->state->active) {
struct drm_property *dpms_property =
dev->mode_config.dpms_property;
@@ -12427,6 +12419,10 @@ check_crtc_state(struct drm_device *dev)
"crtc active state doesn't match with hw state "
"(expected %i, found %i)\n", crtc->active, active);
+ I915_STATE_WARN(crtc->active != crtc->base.state->active,
+ "transitional active state does not match atomic hw state "
+ "(expected %i, found %i)\n", crtc->base.state->active, crtc->active);
+
if (active &&
!intel_pipe_config_compare(dev, crtc->config, &pipe_config)) {
I915_STATE_WARN(1, "pipe state doesn't match!\n");
@@ -12568,6 +12564,10 @@ intel_modeset_compute_config(struct drm_crtc *crtc,
if (IS_ERR(pipe_config))
return pipe_config;
+ if (!pipe_config->base.enable &&
+ WARN_ON(pipe_config->base.active))
+ pipe_config->base.active = false;
+
if (!pipe_config->base.enable)
return pipe_config;
@@ -12676,7 +12676,7 @@ static int __intel_set_mode(struct drm_atomic_state *state)
return ret;
for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (!needs_modeset(crtc_state))
+ if (!needs_modeset(crtc_state) || !crtc->state->active)
continue;
intel_crtc_disable_planes(crtc);
@@ -12698,7 +12698,7 @@ static int __intel_set_mode(struct drm_atomic_state *state)
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (!needs_modeset(crtc->state) || !crtc->state->enable)
+ if (!needs_modeset(crtc->state) || !crtc->state->active)
continue;
update_scanline_offset(to_intel_crtc(crtc));
@@ -14958,7 +14958,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
* have active connectors/encoders. */
intel_crtc_update_dpms(&crtc->base);
- if (crtc->active != crtc->base.state->enable) {
+ if (crtc->active != crtc->base.state->active) {
struct intel_encoder *encoder;
/* This can happen either due to bugs in the get_hw_state
--
2.1.0
More information about the Intel-gfx
mailing list