[Intel-gfx] [PATCH v4 24/27] drm/i915: Remove use of crtc->config from i915_debugfs.c
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Mon Jun 1 03:50:08 PDT 2015
crtc->config is updated to always contain to the active crtc_state
and only differs from crtc_state during crtc_disable. It will
eventually be removed, so start with some low hanging fruit.
For crtc->active the situation is the same; it will be removed
eventually. Instead use crtc->state->active.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper at intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 42 ++++++++++++++++++++++++-------------
1 file changed, 27 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 9a6159dd1972..51fe0fbcd00c 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2777,13 +2777,16 @@ static int i915_display_info(struct seq_file *m, void *unused)
seq_printf(m, "---------\n");
for_each_intel_crtc(dev, crtc) {
bool active;
+ struct intel_crtc_state *pipe_config;
int x, y;
+ pipe_config = to_intel_crtc_state(crtc->base.state);
+
seq_printf(m, "CRTC %d: pipe: %c, active=%s (size=%dx%d)\n",
crtc->base.base.id, pipe_name(crtc->pipe),
- yesno(crtc->active), crtc->config->pipe_src_w,
- crtc->config->pipe_src_h);
- if (crtc->active) {
+ yesno(pipe_config->base.active),
+ pipe_config->pipe_src_w, pipe_config->pipe_src_h);
+ if (pipe_config->base.active) {
intel_crtc_info(m, crtc);
active = cursor_position(dev, crtc->pipe, &x, &y);
@@ -3024,7 +3027,7 @@ static void drrs_status_per_crtc(struct seq_file *m,
seq_puts(m, "\n\n");
- if (intel_crtc->config->has_drrs) {
+ if (to_intel_crtc_state(intel_crtc->base.state)->has_drrs) {
struct intel_panel *panel;
mutex_lock(&drrs->mutex);
@@ -3076,7 +3079,7 @@ static int i915_drrs_status(struct seq_file *m, void *unused)
for_each_intel_crtc(dev, intel_crtc) {
drm_modeset_lock(&intel_crtc->base.mutex, NULL);
- if (intel_crtc->active) {
+ if (intel_crtc->base.state->active) {
active_crtc_cnt++;
seq_printf(m, "\nCRTC %d: ", active_crtc_cnt);
@@ -3618,22 +3621,27 @@ static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc =
to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_A]);
+ struct intel_crtc_state *pipe_config;
drm_modeset_lock_all(dev);
+ pipe_config = to_intel_crtc_state(crtc->base.state);
+
/*
* If we use the eDP transcoder we need to make sure that we don't
* bypass the pfit, since otherwise the pipe CRC source won't work. Only
* relevant on hsw with pipe A when using the always-on power well
* routing.
*/
- if (crtc->config->cpu_transcoder == TRANSCODER_EDP &&
- !crtc->config->pch_pfit.enabled) {
- bool active = crtc->active;
+ if (pipe_config->cpu_transcoder == TRANSCODER_EDP &&
+ !pipe_config->pch_pfit.enabled) {
+ bool active = pipe_config->base.active;
- if (active)
+ if (active) {
intel_crtc_control(&crtc->base, false);
+ pipe_config = to_intel_crtc_state(crtc->base.state);
+ }
- crtc->config->pch_pfit.force_thru = true;
+ pipe_config->pch_pfit.force_thru = true;
intel_display_power_get(dev_priv,
POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
@@ -3649,6 +3657,7 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc =
to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_A]);
+ struct intel_crtc_state *pipe_config;
drm_modeset_lock_all(dev);
/*
@@ -3657,13 +3666,16 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
* relevant on hsw with pipe A when using the always-on power well
* routing.
*/
- if (crtc->config->pch_pfit.force_thru) {
- bool active = crtc->active;
+ pipe_config = to_intel_crtc_state(crtc->base.state);
+ if (pipe_config->pch_pfit.force_thru) {
+ bool active = pipe_config->base.active;
- if (active)
+ if (active) {
intel_crtc_control(&crtc->base, false);
+ pipe_config = to_intel_crtc_state(crtc->base.state);
+ }
- crtc->config->pch_pfit.force_thru = false;
+ pipe_config->pch_pfit.force_thru = false;
intel_display_power_put(dev_priv,
POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
@@ -3785,7 +3797,7 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
pipe_name(pipe));
drm_modeset_lock(&crtc->base.mutex, NULL);
- if (crtc->active)
+ if (crtc->base.state->active)
intel_wait_for_vblank(dev, pipe);
drm_modeset_unlock(&crtc->base.mutex);
--
2.1.0
More information about the Intel-gfx
mailing list