[Intel-gfx] [PATCH] drm/i915: Don't check modeset state in the hw state force restore path

Jani Nikula jani.nikula at linux.intel.com
Tue Jun 2 00:12:24 PDT 2015


On Mon, 01 Jun 2015, Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com> wrote:
> Since the force restore logic will restore the CRTCs state one at a
> time, it is possible that the state will be inconsistent until the whole
> operation finishes. A call to intel_modeset_check_state() is done once
> it's over, so don't check the state multiple times in between. This
> regression was introduced in:
>
> commit 7f27126ea3db6ade886f18fd39caf0ff0cd1d37f
> Author: Jesse Barnes <jbarnes at virtuousgeek.org>
> Date:   Wed Nov 5 14:26:06 2014 -0800
>
>     drm/i915: factor out compute_config from __intel_set_mode v3
>
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94431
> Cc: Jesse Barnes <jbarnes at virtuousgeek.org>
> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
> ---
>
> Hi,
>
> This patch applies on top of nightly, but it is only relevant without
> Maarten's "drm/i915: Convert to atomic, part 2" series, because of the
> changes to the hw state read out and force restore logic.
>
> The regression exists since 3.19.

Sooo, I think this should be applied to fixes, with cc: stable v3.19+,
and IIUC Maarten's series makes this obsolete in dinq?

Now we just need review... Maarten?

BR,
Jani.




>
> ---
>  drivers/gpu/drm/i915/intel_display.c | 21 ++++++++++++---------
>  1 file changed, 12 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 16e159d..24fb7ce 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -87,7 +87,8 @@ static void ironlake_pch_clock_get(struct intel_crtc *crtc,
>  				   struct intel_crtc_state *pipe_config);
>  
>  static int intel_set_mode(struct drm_crtc *crtc,
> -			  struct drm_atomic_state *state);
> +			  struct drm_atomic_state *state,
> +			  bool check);
>  static int intel_framebuffer_init(struct drm_device *dev,
>  				  struct intel_framebuffer *ifb,
>  				  struct drm_mode_fb_cmd2 *mode_cmd,
> @@ -10282,7 +10283,7 @@ retry:
>  
>  	drm_mode_copy(&crtc_state->base.mode, mode);
>  
> -	if (intel_set_mode(crtc, state)) {
> +	if (intel_set_mode(crtc, state, true)) {
>  		DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
>  		if (old->release_fb)
>  			old->release_fb->funcs->destroy(old->release_fb);
> @@ -10356,7 +10357,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
>  		if (ret)
>  			goto fail;
>  
> -		ret = intel_set_mode(crtc, state);
> +		ret = intel_set_mode(crtc, state, true);
>  		if (ret)
>  			goto fail;
>  
> @@ -12832,20 +12833,22 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
>  }
>  
>  static int intel_set_mode_with_config(struct drm_crtc *crtc,
> -				      struct intel_crtc_state *pipe_config)
> +				      struct intel_crtc_state *pipe_config,
> +				      bool check)
>  {
>  	int ret;
>  
>  	ret = __intel_set_mode(crtc, pipe_config);
>  
> -	if (ret == 0)
> +	if (ret == 0 && check)
>  		intel_modeset_check_state(crtc->dev);
>  
>  	return ret;
>  }
>  
>  static int intel_set_mode(struct drm_crtc *crtc,
> -			  struct drm_atomic_state *state)
> +			  struct drm_atomic_state *state,
> +			  bool check)
>  {
>  	struct intel_crtc_state *pipe_config;
>  	int ret = 0;
> @@ -12856,7 +12859,7 @@ static int intel_set_mode(struct drm_crtc *crtc,
>  		goto out;
>  	}
>  
> -	ret = intel_set_mode_with_config(crtc, pipe_config);
> +	ret = intel_set_mode_with_config(crtc, pipe_config, check);
>  	if (ret)
>  		goto out;
>  
> @@ -12933,7 +12936,7 @@ void intel_crtc_restore_mode(struct drm_crtc *crtc)
>  	intel_modeset_setup_plane_state(state, crtc, &crtc->mode,
>  					crtc->primary->fb, crtc->x, crtc->y);
>  
> -	ret = intel_set_mode(crtc, state);
> +	ret = intel_set_mode(crtc, state, false);
>  	if (ret)
>  		drm_atomic_state_free(state);
>  }
> @@ -13133,7 +13136,7 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
>  
>  	primary_plane_was_visible = primary_plane_visible(set->crtc);
>  
> -	ret = intel_set_mode_with_config(set->crtc, pipe_config);
> +	ret = intel_set_mode_with_config(set->crtc, pipe_config, true);
>  
>  	if (ret == 0 &&
>  	    pipe_config->base.enable &&
> -- 
> 2.1.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Jani Nikula, Intel Open Source Technology Center


More information about the Intel-gfx mailing list