[Intel-gfx] [PATCH v2 6/9] drm/i915: Disable all infoframes when turning off the HDMI port
Ville Syrjälä
ville.syrjala at linux.intel.com
Tue Jun 2 04:11:13 PDT 2015
On Mon, Jun 01, 2015 at 10:48:03PM +0000, Konduru, Chandra wrote:
>
>
> > -----Original Message-----
> > From: Intel-gfx [mailto:intel-gfx-bounces at lists.freedesktop.org] On Behalf Of
> > ville.syrjala at linux.intel.com
> > Sent: Tuesday, May 05, 2015 7:06 AM
> > To: intel-gfx at lists.freedesktop.org
> > Subject: [Intel-gfx] [PATCH v2 6/9] drm/i915: Disable all infoframes when
> > turning off the HDMI port
> >
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >
> > Currently we just disable the GCP infoframe when turning off the port.
> > That means if the same transcoder is used on a DP port next, we might
> > end up pushing infoframes over DP, which isn't intended. Just disable
>
> Wonder how it is working. May be it is ok, or never hit using a previously
> used transcoder for HDMI port for DP.
>
> By the way, you mean end up pushing "other" infoframes over DP?
We don't send infoframes over DP at all currently. Or I should say we
never intended to send them. After this patch that should even be true.
Well, unless the BIOS already enables them and we just fire up a DP port
using the transcoder in question. So I suppose we should really have the
DP code clear the infoframe settings explicitly, or we should clear them
during the sanitize phase.
>
> > all the infoframes when turning off the port.
> >
> > Also protect against two ports stomping on each other on g4x due to
> > the single video DIP instance. Now only the first port to enable
> > gets to send infoframes.
>
> So is, 2nd port doesn't gets to send infoframes, the expected behavior
> when two ports trying with a single DIP?
I'm not sure what's the best behaviour here. Either we somehow pick one
of the ports to send infoframes (first come first serve in this patch),
or we could just disable infoframes entirely for cloned cases. But it's
probably a rare configuration anyway since HDMI cloning is only allowed
on g4x.
>
> Seems like a corner case to test thoroughly. Is this path exercised in your testing?
I tested it long ago. Although I must admit that the patch looked a bit
different back then.
>
> >
> > v2: Rebase
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_hdmi.c | 85 ++++++++++++++++++---------------------
> > 1 file changed, 40 insertions(+), 45 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
> > b/drivers/gpu/drm/i915/intel_hdmi.c
> > index 766bdb1..03b4759 100644
> > --- a/drivers/gpu/drm/i915/intel_hdmi.c
> > +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> > @@ -514,7 +514,13 @@ static void g4x_set_infoframes(struct drm_encoder
> > *encoder,
> > if (!enable) {
> > if (!(val & VIDEO_DIP_ENABLE))
> > return;
> > - val &= ~VIDEO_DIP_ENABLE;
> > + if (port != (val & VIDEO_DIP_PORT_MASK)) {
> > + DRM_DEBUG_KMS("video DIP still enabled on port
> > %c\n",
> > + (val & VIDEO_DIP_PORT_MASK) >> 29);
> > + return;
> > + }
> > + val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI |
> > + VIDEO_DIP_ENABLE_VENDOR |
> > VIDEO_DIP_ENABLE_SPD);
> > I915_WRITE(reg, val);
> > POSTING_READ(reg);
> > return;
> > @@ -522,16 +528,17 @@ static void g4x_set_infoframes(struct drm_encoder
> > *encoder,
> >
> > if (port != (val & VIDEO_DIP_PORT_MASK)) {
> > if (val & VIDEO_DIP_ENABLE) {
> > - val &= ~VIDEO_DIP_ENABLE;
> > - I915_WRITE(reg, val);
> > - POSTING_READ(reg);
> > + DRM_DEBUG_KMS("video DIP already enabled on port
> > %c\n",
> > + (val & VIDEO_DIP_PORT_MASK) >> 29);
> > + return;
> > }
> > val &= ~VIDEO_DIP_PORT_MASK;
> > val |= port;
> > }
> >
> > val |= VIDEO_DIP_ENABLE;
> > - val &= ~VIDEO_DIP_ENABLE_VENDOR;
> > + val &= ~(VIDEO_DIP_ENABLE_AVI |
> > + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_SPD);
> >
> > I915_WRITE(reg, val);
> > POSTING_READ(reg);
> > @@ -632,23 +639,6 @@ static bool intel_hdmi_set_gcp_infoframe(struct
> > drm_encoder *encoder)
> > return val != 0;
> > }
> >
> > -static void intel_disable_gcp_infoframe(struct intel_crtc *crtc)
> > -{
> > - struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
> > - u32 reg;
> > -
> > - if (HAS_DDI(dev_priv))
> > - reg = HSW_TVIDEO_DIP_CTL(crtc->config->cpu_transcoder);
> > - else if (IS_VALLEYVIEW(dev_priv))
> > - reg = VLV_TVIDEO_DIP_CTL(crtc->pipe);
> > - else if (HAS_PCH_SPLIT(dev_priv->dev))
> > - reg = TVIDEO_DIP_CTL(crtc->pipe);
> > - else
> > - return;
> > -
> > - I915_WRITE(reg, I915_READ(reg) & ~VIDEO_DIP_ENABLE_GCP);
> > -}
> > -
> > static void ibx_set_infoframes(struct drm_encoder *encoder,
> > bool enable,
> > struct drm_display_mode *adjusted_mode)
> > @@ -669,25 +659,26 @@ static void ibx_set_infoframes(struct drm_encoder
> > *encoder,
> > if (!enable) {
> > if (!(val & VIDEO_DIP_ENABLE))
> > return;
> > - val &= ~VIDEO_DIP_ENABLE;
> > + val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI |
> > + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
> > + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
> > I915_WRITE(reg, val);
> > POSTING_READ(reg);
> > return;
> > }
> >
> > if (port != (val & VIDEO_DIP_PORT_MASK)) {
> > - if (val & VIDEO_DIP_ENABLE) {
> > - val &= ~VIDEO_DIP_ENABLE;
> > - I915_WRITE(reg, val);
> > - POSTING_READ(reg);
> > - }
> > + WARN(val & VIDEO_DIP_ENABLE,
> > + "DIP already enabled on port %c\n",
> > + (val & VIDEO_DIP_PORT_MASK) >> 29);
> > val &= ~VIDEO_DIP_PORT_MASK;
> > val |= port;
> > }
> >
> > val |= VIDEO_DIP_ENABLE;
> > - val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
> > - VIDEO_DIP_ENABLE_GCP);
> > + val &= ~(VIDEO_DIP_ENABLE_AVI |
> > + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
> > + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
> >
> > if (intel_hdmi_set_gcp_infoframe(encoder))
> > val |= VIDEO_DIP_ENABLE_GCP;
> > @@ -718,7 +709,9 @@ static void cpt_set_infoframes(struct drm_encoder
> > *encoder,
> > if (!enable) {
> > if (!(val & VIDEO_DIP_ENABLE))
> > return;
> > - val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI);
> > + val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI |
> > + VIDEO_DIP_ENABLE_VENDOR |
> > VIDEO_DIP_ENABLE_GAMUT |
> > + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
> > I915_WRITE(reg, val);
> > POSTING_READ(reg);
> > return;
> > @@ -727,7 +720,7 @@ static void cpt_set_infoframes(struct drm_encoder
> > *encoder,
> > /* Set both together, unset both together: see the spec. */
> > val |= VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI;
> > val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
> > - VIDEO_DIP_ENABLE_GCP);
> > + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
> >
> > if (intel_hdmi_set_gcp_infoframe(encoder))
> > val |= VIDEO_DIP_ENABLE_GCP;
> > @@ -760,25 +753,26 @@ static void vlv_set_infoframes(struct drm_encoder
> > *encoder,
> > if (!enable) {
> > if (!(val & VIDEO_DIP_ENABLE))
> > return;
> > - val &= ~VIDEO_DIP_ENABLE;
> > + val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI |
> > + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
> > + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
> > I915_WRITE(reg, val);
> > POSTING_READ(reg);
> > return;
> > }
> >
> > if (port != (val & VIDEO_DIP_PORT_MASK)) {
> > - if (val & VIDEO_DIP_ENABLE) {
> > - val &= ~VIDEO_DIP_ENABLE;
> > - I915_WRITE(reg, val);
> > - POSTING_READ(reg);
> > - }
> > + WARN(val & VIDEO_DIP_ENABLE,
> > + "DIP already enabled on port %c\n",
> > + (val & VIDEO_DIP_PORT_MASK) >> 29);
> > val &= ~VIDEO_DIP_PORT_MASK;
> > val |= port;
> > }
> >
> > val |= VIDEO_DIP_ENABLE;
> > - val &= ~(VIDEO_DIP_ENABLE_AVI | VIDEO_DIP_ENABLE_VENDOR |
> > - VIDEO_DIP_ENABLE_GAMUT | VIDEO_DIP_ENABLE_GCP);
> > + val &= ~(VIDEO_DIP_ENABLE_AVI |
> > + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
> > + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
> >
> > if (intel_hdmi_set_gcp_infoframe(encoder))
> > val |= VIDEO_DIP_ENABLE_GCP;
> > @@ -803,15 +797,16 @@ static void hsw_set_infoframes(struct drm_encoder
> > *encoder,
> >
> > assert_hdmi_port_disabled(intel_hdmi);
> >
> > + val &= ~(VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_AVI_HSW |
> > + VIDEO_DIP_ENABLE_GCP_HSW | VIDEO_DIP_ENABLE_VS_HSW |
> > + VIDEO_DIP_ENABLE_GMP_HSW | VIDEO_DIP_ENABLE_SPD_HSW);
> > +
> > if (!enable) {
> > - I915_WRITE(reg, 0);
> > + I915_WRITE(reg, val);
> > POSTING_READ(reg);
> > return;
> > }
> >
> > - val &= ~(VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_GCP_HSW |
> > - VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW);
> > -
> > if (intel_hdmi_set_gcp_infoframe(encoder))
> > val |= VIDEO_DIP_ENABLE_GCP_HSW;
> >
> > @@ -1133,7 +1128,7 @@ static void intel_disable_hdmi(struct intel_encoder
> > *encoder)
> > if (IS_CHERRYVIEW(dev))
> > chv_powergate_phy_lanes(encoder, 0xf);
> >
> > - intel_disable_gcp_infoframe(to_intel_crtc(encoder->base.crtc));
> > + intel_hdmi->set_infoframes(&encoder->base, false, NULL);
> > }
> >
> > static int hdmi_portclock_limit(struct intel_hdmi *hdmi, bool respect_dvi_limit)
> > --
> > 2.0.5
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list