[Intel-gfx] [PATCH 07/24] drm/i915: Add a simple atomic crtc check function.

Matt Roper matthew.d.roper at intel.com
Tue Jun 2 18:28:12 PDT 2015


On Mon, Jun 01, 2015 at 03:27:10PM +0200, Maarten Lankhorst wrote:
> Move the check for encoder cloning here.
> 
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_atomic.c  |   5 +-
>  drivers/gpu/drm/i915/intel_display.c | 131 ++++++++++++++++++++---------------
>  2 files changed, 80 insertions(+), 56 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
> index 156df1b59ddd..1edd1651c045 100644
> --- a/drivers/gpu/drm/i915/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> @@ -100,7 +100,10 @@ int intel_atomic_check(struct drm_device *dev,
>  	if (ret)
>  		return ret;
>  
> -	/* FIXME: move to crtc atomic check function once it is ready */
> +	/*
> +	 * FIXME: move to crtc atomic check function once this is
> +	 * more atomic friendly.
> +	 */
>  	ret = intel_atomic_setup_scalers(dev, nuclear_crtc, crtc_state);
>  	if (ret)
>  		return ret;
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 6f3e96930da5..0060784525dc 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -11404,11 +11404,87 @@ out_hang:
>  	return ret;
>  }
>  
> +static bool encoders_cloneable(const struct intel_encoder *a,
> +			       const struct intel_encoder *b)
> +{
> +	/* masks could be asymmetric, so check both ways */
> +	return a == b || (a->cloneable & (1 << b->type) &&
> +			  b->cloneable & (1 << a->type));
> +}
> +
> +static bool check_single_encoder_cloning(struct drm_atomic_state *state,
> +					 struct intel_crtc *crtc,
> +					 struct intel_encoder *encoder)
> +{
> +	struct intel_encoder *source_encoder;
> +	struct drm_connector *connector;
> +	struct drm_connector_state *connector_state;
> +	int i;
> +
> +	for_each_connector_in_state(state, connector, connector_state, i) {
> +		if (connector_state->crtc != &crtc->base)
> +			continue;
> +
> +		source_encoder =
> +			to_intel_encoder(connector_state->best_encoder);
> +		if (!encoders_cloneable(encoder, source_encoder))
> +			return false;
> +	}
> +
> +	return true;
> +}
> +
> +static bool check_encoder_cloning(struct drm_atomic_state *state,
> +				  struct intel_crtc *crtc)
> +{
> +	struct intel_encoder *encoder;
> +	struct drm_connector *connector;
> +	struct drm_connector_state *connector_state;
> +	int i;
> +
> +	for_each_connector_in_state(state, connector, connector_state, i) {
> +		if (connector_state->crtc != &crtc->base)
> +			continue;
> +
> +		encoder = to_intel_encoder(connector_state->best_encoder);
> +		if (!check_single_encoder_cloning(state, crtc, encoder))
> +			return false;
> +	}
> +
> +	return true;
> +}
> +
> +static int intel_atomic_check_crtc(struct drm_crtc *crtc,
> +				   struct drm_crtc_state *crtc_state)

The plane equivalent is 'intel_plane_atomic_check'...it would be nice if
we could keep the naming consistent (intel_crtc_atomic_check).

Not sure if this should go in intel_display.c or intel_atomic.c.  Maybe
a future patch can shuffle a bunch of stuff around so things are a bit
more consistent than they are today.


> +{
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	struct drm_atomic_state *state = crtc_state->state;
> +	int idx = crtc->base.id;
> +	bool is_crtc_enabled = crtc_state->active;
> +	bool was_crtc_enabled = crtc->state->active;
> +	bool mode_changed = needs_modeset(crtc_state);
> +
> +	if (mode_changed && !check_encoder_cloning(state, intel_crtc)) {
> +		DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
> +		return -EINVAL;
> +	}
> +
> +	I915_STATE_WARN(crtc->state->active != intel_crtc->active,
> +		"[CRTC:%i] mismatch between state->active(%i) and crtc->active(%i)\n",
> +		idx, crtc->state->active, intel_crtc->active);
> +
> +	DRM_DEBUG_ATOMIC("Crtc %i was enabled %i now enabled: %i\n",
> +			 idx, was_crtc_enabled, is_crtc_enabled);

Maybe just print this debug message when the values aren't equal (i.e.,
an actual change) to cut down on a little spam when it isn't
interesting?


Matt

> +
> +	return 0;
> +}
> +
>  static const struct drm_crtc_helper_funcs intel_helper_funcs = {
>  	.mode_set_base_atomic = intel_pipe_set_base_atomic,
>  	.load_lut = intel_crtc_load_lut,
>  	.atomic_begin = intel_begin_crtc_commit,
>  	.atomic_flush = intel_finish_crtc_commit,
> +	.atomic_check = intel_atomic_check_crtc,
>  };
>  
>  /* Transitional helper to copy current connector/encoder state to
> @@ -11634,56 +11710,6 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
>  	}
>  }
>  
> -static bool encoders_cloneable(const struct intel_encoder *a,
> -			       const struct intel_encoder *b)
> -{
> -	/* masks could be asymmetric, so check both ways */
> -	return a == b || (a->cloneable & (1 << b->type) &&
> -			  b->cloneable & (1 << a->type));
> -}
> -
> -static bool check_single_encoder_cloning(struct drm_atomic_state *state,
> -					 struct intel_crtc *crtc,
> -					 struct intel_encoder *encoder)
> -{
> -	struct intel_encoder *source_encoder;
> -	struct drm_connector *connector;
> -	struct drm_connector_state *connector_state;
> -	int i;
> -
> -	for_each_connector_in_state(state, connector, connector_state, i) {
> -		if (connector_state->crtc != &crtc->base)
> -			continue;
> -
> -		source_encoder =
> -			to_intel_encoder(connector_state->best_encoder);
> -		if (!encoders_cloneable(encoder, source_encoder))
> -			return false;
> -	}
> -
> -	return true;
> -}
> -
> -static bool check_encoder_cloning(struct drm_atomic_state *state,
> -				  struct intel_crtc *crtc)
> -{
> -	struct intel_encoder *encoder;
> -	struct drm_connector *connector;
> -	struct drm_connector_state *connector_state;
> -	int i;
> -
> -	for_each_connector_in_state(state, connector, connector_state, i) {
> -		if (connector_state->crtc != &crtc->base)
> -			continue;
> -
> -		encoder = to_intel_encoder(connector_state->best_encoder);
> -		if (!check_single_encoder_cloning(state, crtc, encoder))
> -			return false;
> -	}
> -
> -	return true;
> -}
> -
>  static bool check_digital_port_conflicts(struct drm_atomic_state *state)
>  {
>  	struct drm_device *dev = state->dev;
> @@ -11770,11 +11796,6 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
>  	int i;
>  	bool retry = true;
>  
> -	if (!check_encoder_cloning(state, to_intel_crtc(crtc))) {
> -		DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
> -		return -EINVAL;
> -	}
> -
>  	clear_intel_crtc_state(pipe_config);
>  
>  	pipe_config->cpu_transcoder =
> -- 
> 2.1.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795


More information about the Intel-gfx mailing list