[Intel-gfx] [PATCH 5/7] drm/i915/skl: Update the cached CDCLK at the end of set_cdclk()
Damien Lespiau
damien.lespiau at intel.com
Thu Jun 4 10:21:33 PDT 2015
Ville's and Mika's cdclk series was in flight at the same time as the
SKL S3 patches so we were missing that update.
intel_update_max_cdclk() and intel_update_cdclk() had to be moved up a
bit to avoid forward declarations.
Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 137 ++++++++++++++++++-----------------
1 file changed, 70 insertions(+), 67 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d64f317..47c765d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5226,6 +5226,73 @@ static void modeset_update_crtc_power_domains(struct drm_atomic_state *state)
intel_display_set_init_power(dev_priv, false);
}
+static void intel_update_max_cdclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (IS_SKYLAKE(dev)) {
+ u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
+
+ if (limit == SKL_DFSM_CDCLK_LIMIT_675)
+ dev_priv->max_cdclk_freq = 675000;
+ else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
+ dev_priv->max_cdclk_freq = 540000;
+ else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
+ dev_priv->max_cdclk_freq = 450000;
+ else
+ dev_priv->max_cdclk_freq = 337500;
+ } else if (IS_BROADWELL(dev)) {
+ /*
+ * FIXME with extra cooling we can allow
+ * 540 MHz for ULX and 675 Mhz for ULT.
+ * How can we know if extra cooling is
+ * available? PCI ID, VTB, something else?
+ */
+ if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+ dev_priv->max_cdclk_freq = 450000;
+ else if (IS_BDW_ULX(dev))
+ dev_priv->max_cdclk_freq = 450000;
+ else if (IS_BDW_ULT(dev))
+ dev_priv->max_cdclk_freq = 540000;
+ else
+ dev_priv->max_cdclk_freq = 675000;
+ } else if (IS_VALLEYVIEW(dev)) {
+ dev_priv->max_cdclk_freq = 400000;
+ } else {
+ /* otherwise assume cdclk is fixed */
+ dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
+ }
+
+ DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
+ dev_priv->max_cdclk_freq);
+}
+
+static void intel_update_cdclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
+ DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
+ dev_priv->cdclk_freq);
+
+ /*
+ * Program the gmbus_freq based on the cdclk frequency.
+ * BSpec erroneously claims we should aim for 4MHz, but
+ * in fact 1MHz is the correct frequency.
+ */
+ if (IS_VALLEYVIEW(dev)) {
+ /*
+ * Program the gmbus_freq based on the cdclk frequency.
+ * BSpec erroneously claims we should aim for 4MHz, but
+ * in fact 1MHz is the correct frequency.
+ */
+ I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
+ }
+
+ if (dev_priv->max_cdclk_freq == 0)
+ intel_update_max_cdclk(dev);
+}
+
static void broxton_set_cdclk(struct drm_device *dev, int frequency)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5517,6 +5584,7 @@ static bool skl_cdclk_wait_for_pcu_ready(struct drm_i915_private *dev_priv)
static void skl_set_cdclk(struct drm_i915_private *dev_priv, unsigned int freq)
{
+ struct drm_device *dev = dev_priv->dev;
u32 freq_select, pcu_ack;
DRM_DEBUG_DRIVER("Changing CDCLK to %dKHz\n", freq);
@@ -5557,6 +5625,8 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv, unsigned int freq)
mutex_lock(&dev_priv->rps.hw_lock);
sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack);
mutex_unlock(&dev_priv->rps.hw_lock);
+
+ intel_update_cdclk(dev);
}
void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
@@ -5627,73 +5697,6 @@ static int valleyview_get_vco(struct drm_i915_private *dev_priv)
return vco_freq[hpll_freq] * 1000;
}
-static void intel_update_max_cdclk(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (IS_SKYLAKE(dev)) {
- u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
-
- if (limit == SKL_DFSM_CDCLK_LIMIT_675)
- dev_priv->max_cdclk_freq = 675000;
- else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
- dev_priv->max_cdclk_freq = 540000;
- else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
- dev_priv->max_cdclk_freq = 450000;
- else
- dev_priv->max_cdclk_freq = 337500;
- } else if (IS_BROADWELL(dev)) {
- /*
- * FIXME with extra cooling we can allow
- * 540 MHz for ULX and 675 Mhz for ULT.
- * How can we know if extra cooling is
- * available? PCI ID, VTB, something else?
- */
- if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
- dev_priv->max_cdclk_freq = 450000;
- else if (IS_BDW_ULX(dev))
- dev_priv->max_cdclk_freq = 450000;
- else if (IS_BDW_ULT(dev))
- dev_priv->max_cdclk_freq = 540000;
- else
- dev_priv->max_cdclk_freq = 675000;
- } else if (IS_VALLEYVIEW(dev)) {
- dev_priv->max_cdclk_freq = 400000;
- } else {
- /* otherwise assume cdclk is fixed */
- dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
- }
-
- DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
- dev_priv->max_cdclk_freq);
-}
-
-static void intel_update_cdclk(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
- DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
- dev_priv->cdclk_freq);
-
- /*
- * Program the gmbus_freq based on the cdclk frequency.
- * BSpec erroneously claims we should aim for 4MHz, but
- * in fact 1MHz is the correct frequency.
- */
- if (IS_VALLEYVIEW(dev)) {
- /*
- * Program the gmbus_freq based on the cdclk frequency.
- * BSpec erroneously claims we should aim for 4MHz, but
- * in fact 1MHz is the correct frequency.
- */
- I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
- }
-
- if (dev_priv->max_cdclk_freq == 0)
- intel_update_max_cdclk(dev);
-}
-
/* Adjust CDclk dividers to allow high res or save power if possible */
static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
{
--
2.1.0
More information about the Intel-gfx
mailing list