[Intel-gfx] No mouse cursor with intelddx-2-99-917-338-g7d30ccea214b at lightdm-login

Sedat Dilek sedat.dilek at gmail.com
Fri Jun 5 03:05:22 PDT 2015


Hi Chris,

thanks for the quick reply.

Attached are my kernel-config, dmesg and X logs plus my build-script.

Hope this helps you.

Regards,
- sed@ -

On Fri, Jun 5, 2015 at 11:49 AM, Chris Wilson <chris at chris-wilson.co.uk> wrote:
> On Fri, Jun 05, 2015 at 11:44:59AM +0200, Sedat Dilek wrote:
>> [ Please CC me I am not subscribed to this ML ]
>>
>> Hi,
>>
>> I have upgraded my llvm-toolchain to v3.6.1 and while at this updated
>> my Linux graphics driver stack on Ubuntu/precise AMD64.
>>
>> This is the cool stuff...
>>
>> libdrm-2-4-61
>> mesa-10-5-6 and mesa-10-5-6-24-g07aa6d78bbc9
>>
>> GOOD: intelddx-2-99-917-312-ga6dd2655cb41
>> BAD: intelddx-2-99-917-338-g7d30ccea214b
>>
>> When I switch to vt-1 and do a "sudo service lightdm stop" and start,
>> the mouse cursor is back in the lightdm login-screen.
>>
>> I am here on Linux v4.1-rc6 if this matters.
>>
>> Any idea what's going on?
>>
>> If you need additional information, please let me know.
>
> If you recompile xf86-video-intel with --enable-debug=full and send me
> the log of the first time lightdm comes up without the cursor, we can
> have a look at what failed.
> -Chris
>
> --
> Chris Wilson, Intel Open Source Technology Centre
-------------- next part --------------
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.0-rc6-1-iniza-small (sedat.dilek at gmail.com@fambox) (gcc version 4.9.2 (Ubuntu 4.9.2-0ubuntu1~12.04) ) #1 SMP Mon Jun 1 10:01:21 CEST 2015
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.1.0-rc6-1-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FE0000000 write-back
[    0.000000]   6 base 11FE00000 mask FFFE00000 uncachable
[    0.000000]   7 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x02ec6000, 0x02ec6fff] PGTABLE
[    0.000000] BRK [0x02ec7000, 0x02ec7fff] PGTABLE
[    0.000000] BRK [0x02ec8000, 0x02ec8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[    0.000000]  [mem 0x11fc00000-0x11fdfffff] page 2M
[    0.000000] BRK [0x02ec9000, 0x02ec9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11fbfffff]
[    0.000000]  [mem 0x100000000-0x11fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0xc0000000-0xd9c9efff]
[    0.000000]  [mem 0xc0000000-0xd9bfffff] page 2M
[    0.000000]  [mem 0xd9c00000-0xd9c9efff] page 4k
[    0.000000] BRK [0x02eca000, 0x02ecafff] PGTABLE
[    0.000000] BRK [0x02ecb000, 0x02ecbfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[    0.000000]  [mem 0xdafff000-0xdaffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xbfffffff]
[    0.000000]  [mem 0x40200000-0xbfffffff] page 2M
[    0.000000] RAMDISK: [mem 0x378f2000-0x37c70fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0100 000024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 0x00000000DAFFE170 00008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[    0.000000] ACPI: FACP 0x00000000DAFEF000 00010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000DAFF2000 0083AC (v02 SECCSD SNB-CPT  00000000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000DAF47000 000040
[    0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[    0.000000] ACPI: SSDT 0x00000000DAFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000DAFF1000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 0x00000000DAFEE000 000038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000DAFED000 000098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000DAFEC000 00003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000DAFEB000 000804 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFEA000 000996 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000DAFE9000 00003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DAFE8000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 0x00000000DAFE7000 00026A (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000DAFE6000 0000D0 (v01 Iffs   IffsAsl  00003000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11fdf8000-0x11fdfcfff]
[    0.000000]  [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b400000-ffff88011f3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000d9c9efff]
[    0.000000]   node   0: [mem 0x00000000dafff000-0x00000000daffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff]
[    0.000000] On node 0 totalpages: 1021500
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13859 pages used for memmap
[    0.000000]   DMA32 zone: 886944 pages, LIFO batch:31
[    0.000000]   Normal zone: 2040 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 35 pages/cpu @ffff88011fa00000 s104008 r8192 d31160 u262144
[    0.000000] pcpu-alloc: s104008 r8192 d31160 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1005381
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1.0-rc6-1-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3916692K/4086000K available (8280K kernel code, 1348K rwdata, 3404K rodata, 1428K init, 14360K bss, 169308K reserved, 0K cma-reserved)
[    0.000000] Running RCU self tests
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU lockdep checking is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:16640 nr_irqs:488 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 8159 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1596.477 MHz processor
[    0.000076] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.95 BogoMIPS (lpj=6385908)
[    0.000089] pid_max: default: 32768 minimum: 301
[    0.000114] ACPI: Core revision 20150410
[    0.018687] ACPI: All ACPI Tables successfully acquired
[    0.030714] Security Framework initialized
[    0.030730] AppArmor: AppArmor initialized
[    0.030736] Yama: becoming mindful.
[    0.031681] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.032999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.033480] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.033503] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.034663] Initializing cgroup subsys blkio
[    0.034675] Initializing cgroup subsys memory
[    0.034700] Initializing cgroup subsys devices
[    0.034733] Initializing cgroup subsys freezer
[    0.034766] Initializing cgroup subsys perf_event
[    0.034778] Initializing cgroup subsys hugetlb
[    0.034831] Disabled fast string operations
[    0.034838] CPU: Physical Processor ID: 0
[    0.034843] CPU: Processor Core ID: 0
[    0.034852] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.034858] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.034866] mce: CPU supports 7 MCE banks
[    0.034886] CPU0: Thermal monitoring enabled (TM1)
[    0.034907] process: using mwait in idle threads
[    0.034915] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.034921] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.035164] Freeing SMP alternatives memory: 24K (ffffffff820b8000 - ffffffff820be000)
[    0.036919] ftrace: allocating 28754 entries in 113 pages
[    0.053378] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.053979] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.093650] TSC deadline timer enabled
[    0.093655] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[    0.093712] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.093755] ... version:                3
[    0.093761] ... bit width:              48
[    0.093766] ... generic registers:      4
[    0.093771] ... value mask:             0000ffffffffffff
[    0.093776] ... max period:             0000ffffffffffff
[    0.093781] ... fixed-purpose events:   3
[    0.093786] ... event mask:             000000070000000f
[    0.095739] x86: Booting SMP configuration:
[    0.095747] .... node  #0, CPUs:      #1
[    0.106705] Disabled fast string operations
[    0.109215] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.109784]  #2
[    0.120732] Disabled fast string operations
[    0.123325]  #3<6>[    0.134279] Disabled fast string operations
[    0.136450] x86: Booted up 1 node, 4 CPUs
[    0.136463] smpboot: Total of 4 processors activated (12771.81 BogoMIPS)
[    0.141434] devtmpfs: initialized
[    0.147070] evm: security.selinux
[    0.147076] evm: security.SMACK64
[    0.147081] evm: security.capability
[    0.147252] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[    0.147612] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.149162] NET: Registered protocol family 16
[    0.160588] cpuidle: using governor ladder
[    0.170919] cpuidle: using governor menu
[    0.171080] ACPI: bus type PCI registered
[    0.171391] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.171403] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.171546] PCI: Using configuration type 1 for base access
[    0.172174] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.188582] ACPI: Added _OSI(Module Device)
[    0.188590] ACPI: Added _OSI(Processor Device)
[    0.188596] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.188602] ACPI: Added _OSI(Processor Aggregator Device)
[    0.200835] ACPI: Executed 1 blocks of module-level executable AML code
[    0.209360] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.211149] ACPI: Dynamic OEM Table Load:
[    0.211178] ACPI: SSDT 0xFFFF88011A4D9000 000688 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.213375] ACPI: Dynamic OEM Table Load:
[    0.213401] ACPI: SSDT 0xFFFF88011A4E0000 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.215400] ACPI: Dynamic OEM Table Load:
[    0.215425] ACPI: SSDT 0xFFFF88011A4DBA00 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.218763] ACPI : EC: EC started
[    0.220143] ACPI: Interpreter enabled
[    0.220168] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[    0.220227] ACPI: (supports S0 S1 S3 S4 S5)
[    0.220233] ACPI: Using IOAPIC for interrupt routing
[    0.220319] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.241246] ACPI: Power Resource [FN00] (off)
[    0.241687] ACPI: Power Resource [FN01] (off)
[    0.242019] ACPI: Power Resource [FN02] (off)
[    0.242346] ACPI: Power Resource [FN03] (off)
[    0.242671] ACPI: Power Resource [FN04] (off)
[    0.245007] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.245021] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.245629] \_SB_.PCI0:_OSC invalid UUID
[    0.245631] _OSC request data:1 1f 0 
[    0.245638] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.246535] PCI host bridge to bus 0000:00
[    0.246544] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.246551] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.246559] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.246566] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.246576] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.246585] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.246646] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.247028] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.247047] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.247058] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.247067] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.247502] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.247542] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit]
[    0.247679] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.248019] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.248052] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff]
[    0.248208] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.248520] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.248557] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit]
[    0.248727] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.248919] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.249083] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.249233] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.249388] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.249560] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.249709] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.249864] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.250027] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.250177] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.250487] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.250520] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff]
[    0.250675] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.250973] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.251425] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.251460] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.251477] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.251494] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.251509] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.251526] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.251543] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff]
[    0.251632] pci 0000:00:1f.2: PME# supported from D3hot
[    0.251921] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.251954] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit]
[    0.252000] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.252690] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[    0.253081] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit]
[    0.254646] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.254887] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.260903] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.260920] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.261133] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.261226] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.261364] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref]
[    0.261449] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.261845] pci 0000:02:00.0: supports D1 D2
[    0.261847] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.261984] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.268786] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.268798] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.268813] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.268996] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.269045] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit]
[    0.269292] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.269569] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.269584] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.271639] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.271828] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.272006] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.272179] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.272352] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.272540] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.272749] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.272922] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.274279] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.274423] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.274780] ACPI : EC: 0 stale EC events cleared
[    0.275567] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.275575] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.275591] vgaarb: loaded
[    0.275596] vgaarb: bridge control possible 0000:00:02.0
[    0.276283] SCSI subsystem initialized
[    0.276460] libata version 3.00 loaded.
[    0.276553] ACPI: bus type USB registered
[    0.276629] usbcore: registered new interface driver usbfs
[    0.276667] usbcore: registered new interface driver hub
[    0.276770] usbcore: registered new device driver usb
[    0.277235] PCI: Using ACPI for IRQ routing
[    0.280879] PCI: pci_cache_line_size set to 64 bytes
[    0.281007] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.281017] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[    0.281020] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.281022] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.281772] NetLabel: Initializing
[    0.281778] NetLabel:  domain hash size = 128
[    0.281783] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.281843] NetLabel:  unlabeled traffic allowed by default
[    0.282038] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.282052] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.285162] Switched to clocksource hpet
[    0.325379] AppArmor: AppArmor Filesystem Enabled
[    0.325649] pnp: PnP ACPI init
[    0.326285] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.326296] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.326304] system 00:00: [io  0x5000-0x5003] has been reserved
[    0.326311] system 00:00: [io  0xffff] has been reserved
[    0.326320] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.326328] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.326335] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.326343] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.326351] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.326360] system 00:00: [io  0x5000-0x500f] could not be reserved
[    0.326400] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.326502] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.326658] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.326670] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.326774] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.326902] pnp 00:04: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.327331] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.327340] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.327349] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.327357] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.327365] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.327372] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.327380] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.327388] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.327397] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.327405] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.327416] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.328333] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.328387] pnp: PnP ACPI: found 7 devices
[    0.339673] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.339739] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.339754] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.339774] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.339782] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.339799] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.339817] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.339830] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.339850] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.339853] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.339855] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.339857] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
[    0.339859] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.339862] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[    0.339864] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.339867] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.339869] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.340017] NET: Registered protocol family 2
[    0.340598] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.341099] TCP bind hash table entries: 32768 (order: 9, 2097152 bytes)
[    0.343443] TCP: Hash tables configured (established 32768 bind 32768)
[    0.343613] UDP hash table entries: 2048 (order: 6, 327680 bytes)
[    0.343973] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes)
[    0.344558] NET: Registered protocol family 1
[    0.344594] pci 0000:00:02.0: Video device with shadowed ROM
[    0.346293] PCI: CLS 64 bytes, default 64
[    0.346556] Trying to unpack rootfs image as initramfs...
[    0.433754] Freeing initrd memory: 3580K (ffff8800378f2000 - ffff880037c71000)
[    0.433873] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.433881] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff]
[    0.434044] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.434054] hw unit of domain pp0-core 2^-16 Joules
[    0.434060] hw unit of domain package 2^-16 Joules
[    0.434065] hw unit of domain pp1-gpu 2^-16 Joules
[    0.434370] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[    0.434393] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[    0.434423] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[    0.434457] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[    0.434647] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[    0.434729] Scanning for low memory corruption every 60 seconds
[    0.436103] futex hash table entries: 2048 (order: 6, 262144 bytes)
[    0.436271] Initialise system trusted keyring
[    0.436409] audit: initializing netlink subsys (disabled)
[    0.436496] audit: type=2000 audit(1433505281.424:1): initialized
[    0.437641] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.438151] VFS: Disk quotas dquot_6.6.0
[    0.438198] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.439163] fuse init (API version 7.23)
[    0.440449] Key type asymmetric registered
[    0.440476] Asymmetric key parser 'x509' registered
[    0.440527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.440693] io scheduler noop registered
[    0.440702] io scheduler deadline registered (default)
[    0.440738] io scheduler cfq registered
[    0.440746] start plist test
[    0.442733] end plist test
[    0.443839] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.444001] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.444234] intel_idle: MWAIT substates: 0x21120
[    0.444236] intel_idle: v0.4 model 0x2A
[    0.444238] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.446061] ACPI: AC Adapter [ADP1] (on-line)
[    0.446890] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.446945] ACPI: Lid Switch [LID0]
[    0.447099] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.447153] ACPI: Power Button [PWRB]
[    0.447303] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.447316] ACPI: Power Button [PWRF]
[    0.451054] thermal LNXTHERM:00: registered as thermal_zone0
[    0.451063] ACPI: Thermal Zone [TZ00] (72 C)
[    0.451820] thermal LNXTHERM:01: registered as thermal_zone1
[    0.451827] ACPI: Thermal Zone [TZ01] (30 C)
[    0.451965] GHES: HEST is not enabled!
[    0.452305] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.460866] ACPI: Battery Slot [BAT1] (battery present)
[    0.462090] Linux agpgart interface v0.103
[    0.471028] brd: module loaded
[    0.476019] loop: module loaded
[    0.481530] ahci 0000:00:1f.2: version 3.0
[    0.481942] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.497070] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    0.497084] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    0.523473] scsi host0: ahci
[    0.523980] scsi host1: ahci
[    0.524349] scsi host2: ahci
[    0.524730] scsi host3: ahci
[    0.525129] scsi host4: ahci
[    0.525529] scsi host5: ahci
[    0.525713] ata1: SATA max UDMA/133 abar m2048 at 0xf0708000 port 0xf0708100 irq 25
[    0.525723] ata2: SATA max UDMA/133 abar m2048 at 0xf0708000 port 0xf0708180 irq 25
[    0.525731] ata3: DUMMY
[    0.525736] ata4: SATA max UDMA/133 abar m2048 at 0xf0708000 port 0xf0708280 irq 25
[    0.525745] ata5: SATA max UDMA/133 abar m2048 at 0xf0708000 port 0xf0708300 irq 25
[    0.525752] ata6: DUMMY
[    0.527348] libphy: Fixed MDIO Bus: probed
[    0.527743] tun: Universal TUN/TAP device driver, 1.6
[    0.527750] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[    0.527943] PPP generic driver version 2.4.2
[    0.528330] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.528545] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    0.533144] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    0.533871] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.533878] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.533886] usb usb1: Product: xHCI Host Controller
[    0.533891] usb usb1: Manufacturer: Linux 4.1.0-rc6-1-iniza-small xhci-hcd
[    0.533897] usb usb1: SerialNumber: 0000:03:00.0
[    0.534714] hub 1-0:1.0: USB hub found
[    0.534808] hub 1-0:1.0: 2 ports detected
[    0.535697] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.535712] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    0.535925] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.535932] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.535940] usb usb2: Product: xHCI Host Controller
[    0.535945] usb usb2: Manufacturer: Linux 4.1.0-rc6-1-iniza-small xhci-hcd
[    0.535951] usb usb2: SerialNumber: 0000:03:00.0
[    0.536455] hub 2-0:1.0: USB hub found
[    0.536524] hub 2-0:1.0: 2 ports detected
[    0.537124] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.537134] ehci-pci: EHCI PCI platform driver
[    0.537488] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.537519] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.537549] ehci-pci 0000:00:1a.0: debug port 2
[    0.541496] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.541530] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[    0.553041] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.553195] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.553202] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.553210] usb usb3: Product: EHCI Host Controller
[    0.553215] usb usb3: Manufacturer: Linux 4.1.0-rc6-1-iniza-small ehci_hcd
[    0.553221] usb usb3: SerialNumber: 0000:00:1a.0
[    0.553683] hub 3-0:1.0: USB hub found
[    0.553711] hub 3-0:1.0: 2 ports detected
[    0.554435] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.554454] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.554479] ehci-pci 0000:00:1d.0: debug port 2
[    0.558391] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.558419] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[    0.568982] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.569137] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    0.569144] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.569151] usb usb4: Product: EHCI Host Controller
[    0.569157] usb usb4: Manufacturer: Linux 4.1.0-rc6-1-iniza-small ehci_hcd
[    0.569163] usb usb4: SerialNumber: 0000:00:1d.0
[    0.569580] hub 4-0:1.0: USB hub found
[    0.569606] hub 4-0:1.0: 2 ports detected
[    0.570001] ehci-platform: EHCI generic platform driver
[    0.570033] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.570050] ohci-pci: OHCI PCI platform driver
[    0.570084] ohci-platform: OHCI generic platform driver
[    0.570114] uhci_hcd: USB Universal Host Controller Interface driver
[    0.570235] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[    0.576249] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.576320] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.577065] mousedev: PS/2 mouse device common for all mice
[    0.578325] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.578367] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.578453] device-mapper: uevent: version 1.0.3
[    0.578656] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel at redhat.com
[    0.578690] Intel P-state driver initializing.
[    0.579440] ledtrig-cpu: registered to indicate activity on CPUs
[    0.579741] NET: Registered protocol family 10
[    0.580786] NET: Registered protocol family 17
[    0.580818] Key type dns_resolver registered
[    0.582160] Loading compiled-in X.509 certificates
[    0.583475] Loaded X.509 cert 'Build time autogenerated kernel key: 91dfb04e4fb8212798e77d720a56322287cbcb86'
[    0.583528] registered taskstats version 1
[    0.584747] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.590611] Key type trusted registered
[    0.600707] Key type encrypted registered
[    0.600724] AppArmor: AppArmor sha1 policy hashing enabled
[    0.600732] evm: HMAC attrs: 0x1
[    0.601777] rtc_cmos 00:01: setting system clock to 2015-06-05 11:54:41 UTC (1433505281)
[    0.601973] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.601979] EDD information not available.
[    0.844943] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.846236] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    0.846261] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.847620] ata1.00: configured for UDMA/133
[    0.848606] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 A6C0 PQ: 0 ANSI: 5
[    0.849875] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.849891] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.850153] sd 0:0:0:0: [sda] Write Protect is off
[    0.850162] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.850262] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.850377] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.864827] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    0.880859] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    0.889190]  sda: sda1 sda2 sda3
[    0.890571] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.997472] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    0.997483] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.998286] hub 3-1:1.0: USB hub found
[    0.998546] hub 3-1:1.0: 6 ports detected
[    1.013564] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    1.013575] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.014237] hub 4-1:1.0: USB hub found
[    1.014551] hub 4-1:1.0: 6 ports detected
[    1.168716] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.169617] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[    1.169640] ata2.00: 31277232 sectors, multi 1: LBA48 
[    1.170380] ata2.00: configured for UDMA/133
[    1.170759] scsi 1:0:0:0: Direct-Access     ATA      SanDisk iSSD P4  9.14 PQ: 0 ANSI: 5
[    1.171560] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    1.171677] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.171734] sd 1:0:0:0: [sdb] Write Protect is off
[    1.171742] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.171791] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.173206]  sdb: sdb1 sdb2
[    1.174057] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.272793] usb 3-1.4: new high-speed USB device number 3 using ehci-pci
[    1.288765] usb 4-1.4: new low-speed USB device number 3 using ehci-pci
[    1.387690] usb 4-1.4: New USB device found, idVendor=046d, idProduct=c00e
[    1.387701] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.387709] usb 4-1.4: Product: USB-PS/2 Optical Mouse
[    1.387715] usb 4-1.4: Manufacturer: Logitech
[    1.432636] tsc: Refined TSC clocksource calibration: 1596.373 MHz
[    1.432648] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x1702c2a0637, max_idle_ns: 440795222505 ns
[    1.460676] usb 4-1.5: new full-speed USB device number 4 using ehci-pci
[    1.488481] ata4: SATA link down (SStatus 0 SControl 300)
[    1.529091] usb 3-1.4: New USB device found, idVendor=2232, idProduct=1018
[    1.529103] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.529112] usb 3-1.4: Product: WebCam SC-13HDL11431N
[    1.529118] usb 3-1.4: Manufacturer: 123
[    1.557844] usb 4-1.5: New USB device found, idVendor=8086, idProduct=0189
[    1.557855] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.808254] ata5: SATA link down (SStatus 0 SControl 300)
[    1.809259] Freeing unused kernel memory: 1428K (ffffffff81f53000 - ffffffff820b8000)
[    1.809271] Write protecting the kernel read-only data: 14336k
[    1.810677] Freeing unused kernel memory: 1948K (ffff880001819000 - ffff880001a00000)
[    1.811197] Freeing unused kernel memory: 692K (ffff880001d53000 - ffff880001e00000)
[    1.851524] udevd[131]: starting version 175
[    2.147798] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.155895] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.173802] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc900009b4000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 31
[    2.173826] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.199331] usbcore: registered new interface driver usbhid
[    2.199345] usbhid: USB HID core driver
[    2.265304] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/0003:046D:C00E.0001/input/input5
[    2.265847] hid-generic 0003:046D:C00E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.4/input0
[    2.432255] Switched to clocksource tsc
[    2.930169] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[    3.629095] random: nonblocking pool is initialized
[    4.066741] usb 3-1.2: new high-speed USB device number 4 using ehci-pci
[    4.161642] usb 3-1.2: New USB device found, idVendor=12d1, idProduct=1446
[    4.161674] usb 3-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[    4.161683] usb 3-1.2: Product: HUAWEI Mobile
[    4.161688] usb 3-1.2: Manufacturer: HUAWEI Technology
[    5.343139] init: ureadahead main process (428) terminated with status 5
[    9.826654] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k FS
[   10.033096] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   10.256208] udevd[697]: starting version 175
[   11.407475] lp: driver loaded but no devices found
[   13.484967] wmi: Mapper loaded
[   13.549930] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150410/utaddress-254)
[   13.549946] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.550218] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
[   13.550230] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.550235] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
[   13.550243] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.550247] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
[   13.550255] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.550258] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   13.725151] samsung_laptop: detected SABI interface: SwSmi@
[   13.725156] samsung_laptop: Backlight controlled by ACPI video driver
[   15.147948] [drm] Initialized drm 1.1.0 20060810
[   15.205766] Bluetooth: Core ver 2.20
[   15.205811] NET: Registered protocol family 31
[   15.205813] Bluetooth: HCI device and connection manager initialized
[   15.205886] Bluetooth: HCI socket layer initialized
[   15.205893] Bluetooth: L2CAP socket layer initialized
[   15.205958] Bluetooth: SCO socket layer initialized
[   15.544122] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[   15.559944] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[   15.604430] usbcore: registered new interface driver btusb
[   15.636032] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[   15.910704] audit: type=1400 audit(1433498096.818:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1052 comm="apparmor_parser"
[   15.910720] audit: type=1400 audit(1433498096.818:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1052 comm="apparmor_parser"
[   15.910732] audit: type=1400 audit(1433498096.818:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1052 comm="apparmor_parser"
[   15.911260] audit: type=1400 audit(1433498096.818:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1024 comm="apparmor_parser"
[   15.911278] audit: type=1400 audit(1433498096.818:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1024 comm="apparmor_parser"
[   15.911291] audit: type=1400 audit(1433498096.818:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1024 comm="apparmor_parser"
[   15.911775] audit: type=1400 audit(1433498096.818:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1052 comm="apparmor_parser"
[   15.911790] audit: type=1400 audit(1433498096.818:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1052 comm="apparmor_parser"
[   15.912027] audit: type=1400 audit(1433498096.818:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1024 comm="apparmor_parser"
[   15.912036] audit: type=1400 audit(1433498096.818:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1024 comm="apparmor_parser"
[   16.455692] cfg80211: Calling CRDA to update world regulatory domain
[   16.851534] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[   16.851898] scsi host6: usb-storage 3-1.2:1.0
[   16.852241] usb-storage 3-1.2:1.1: USB Mass Storage device detected
[   16.852455] scsi host7: usb-storage 3-1.2:1.1
[   16.852826] usbcore: registered new interface driver usb-storage
[   16.941331] ppdev: user-space parallel port driver
[   17.336946] Linux video capture interface: v2.00
[   17.754006] cfg80211: World regulatory domain updated:
[   17.754015] cfg80211:  DFS Master region: unset
[   17.754018] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   17.754023] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   17.754027] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   17.754031] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   17.754034] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   17.754038] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   17.851631] scsi 6:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   17.851770] scsi 7:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[   17.856003] sr 6:0:0:0: [sr0] scsi-1 drive
[   17.856008] cdrom: Uniform CD-ROM driver Revision: 3.20
[   17.857807] sr 6:0:0:0: Attached scsi CD-ROM sr0
[   17.858564] sr 6:0:0:0: Attached scsi generic sg2 type 5
[   17.860667] sd 7:0:0:0: Attached scsi generic sg3 type 0
[   17.863628] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[   17.990045] Intel(R) Wireless WiFi driver for Linux
[   17.990050] Copyright(c) 2003- 2015 Intel Corporation
[   17.990391] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[   18.167648] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[   18.187418] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input7
[   18.187841] usbcore: registered new interface driver uvcvideo
[   18.187844] USB Video Class driver (1.1.1)
[   18.281852] init: failsafe main process (1125) killed by TERM signal
[   18.514498] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   18.514504] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.514507] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   18.514509] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   18.514511] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   18.514515] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   18.514518] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   18.689600] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   18.690341] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   18.690612] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   18.695210] Bluetooth: RFCOMM TTY layer initialized
[   18.695226] Bluetooth: RFCOMM socket layer initialized
[   18.695242] Bluetooth: RFCOMM ver 1.11
[   18.865017] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   18.902734] [drm] Memory usable by graphics device = 2048M
[   18.902805] [drm] Replacing VGA console driver
[   18.912262] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   18.912266] [drm] Driver supports precise vblank timestamp query.
[   18.913091] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   18.927523] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   18.928478] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[   18.930353] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[   18.937776] fbcon: inteldrmfb (fb0) is primary device
[   19.176117] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.176119] Bluetooth: BNEP filters: protocol multicast
[   19.176128] Bluetooth: BNEP socket layer initialized
[   19.473322] usb 3-1.2: USB disconnect, device number 4
[   19.953047] Console: switching to colour frame buffer device 170x48
[   19.956511] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   19.956514] i915 0000:00:02.0: registered panic notifier
[   21.386519] audit_printk_skb: 15 callbacks suppressed
[   21.386526] audit: type=1400 audit(1433498102.298:17): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1349 comm="apparmor_parser"
[   21.386543] audit: type=1400 audit(1433498102.298:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1349 comm="apparmor_parser"
[   21.386555] audit: type=1400 audit(1433498102.298:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1349 comm="apparmor_parser"
[   21.387405] audit: type=1400 audit(1433498102.298:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1349 comm="apparmor_parser"
[   21.387419] audit: type=1400 audit(1433498102.298:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1349 comm="apparmor_parser"
[   21.387896] audit: type=1400 audit(1433498102.298:22): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1349 comm="apparmor_parser"
[   21.395867] audit: type=1400 audit(1433498102.306:23): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1353 comm="apparmor_parser"
[   21.395879] audit: type=1400 audit(1433498102.306:24): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1353 comm="apparmor_parser"
[   21.396614] audit: type=1400 audit(1433498102.306:25): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1353 comm="apparmor_parser"
[   21.705941] audit: type=1400 audit(1433498102.614:26): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1355 comm="apparmor_parser"
[   22.137610] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   22.137615] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   22.137617] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   22.137621] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[   22.138259] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[   22.350140] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   23.253014] usb 3-1.2: new high-speed USB device number 5 using ehci-pci
[   23.347929] usb 3-1.2: New USB device found, idVendor=12d1, idProduct=1436
[   23.347941] usb 3-1.2: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[   23.347948] usb 3-1.2: Product: HUAWEI Mobile
[   23.347953] usb 3-1.2: Manufacturer: HUAWEI Technology
[   23.351396] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[   23.352566] usb-storage 3-1.2:1.1: USB Mass Storage device detected
[   23.353329] usb-storage 3-1.2:1.2: USB Mass Storage device detected
[   23.353965] usb-storage 3-1.2:1.3: USB Mass Storage device detected
[   23.354589] usb-storage 3-1.2:1.4: USB Mass Storage device detected
[   23.355186] usb-storage 3-1.2:1.5: USB Mass Storage device detected
[   23.355845] scsi host13: usb-storage 3-1.2:1.5
[   23.356451] usb-storage 3-1.2:1.6: USB Mass Storage device detected
[   23.357449] scsi host14: usb-storage 3-1.2:1.6
[   23.554016] cdc_ether 3-1.2:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1a.0-1.2, Mobile Broadband Network Device, 02:50:f3:00:00:00
[   23.554143] usbcore: registered new interface driver cdc_ether
[   23.630607] usbcore: registered new interface driver usbserial
[   24.109549] usbcore: registered new interface driver option
[   24.112082] usbserial: USB Serial support registered for GSM modem (1-port)
[   24.113781] option 3-1.2:1.0: GSM modem (1-port) converter detected
[   24.115714] usb 3-1.2: GSM modem (1-port) converter now attached to ttyUSB0
[   24.116080] option 3-1.2:1.3: GSM modem (1-port) converter detected
[   24.117125] usb 3-1.2: GSM modem (1-port) converter now attached to ttyUSB1
[   24.117203] option 3-1.2:1.4: GSM modem (1-port) converter detected
[   24.118038] usb 3-1.2: GSM modem (1-port) converter now attached to ttyUSB2
[   24.354134] scsi 13:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   24.358132] scsi 14:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[   24.358385] sr 13:0:0:0: [sr0] scsi-1 drive
[   24.359664] sr 13:0:0:0: Attached scsi CD-ROM sr0
[   24.360038] sr 13:0:0:0: Attached scsi generic sg2 type 5
[   24.366983] sd 14:0:0:0: Attached scsi generic sg3 type 0
[   24.371122] sd 14:0:0:0: [sdc] Attached SCSI removable disk
[   27.468081] r8169 0000:02:00.0 eth0: link down
[   27.468262] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log.gz
Type: application/x-gzip
Size: 3838592 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20150605/fb945cc3/attachment-0001.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: build_xf86-video-intel-with-llvm.sh
Type: application/x-sh
Size: 2266 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20150605/fb945cc3/attachment-0001.sh>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: config-4.1.0-rc6-1-iniza-small
Type: application/octet-stream
Size: 125707 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20150605/fb945cc3/attachment-0001.obj>


More information about the Intel-gfx mailing list