[Intel-gfx] [PATCH v2 03/27] drm/i915: clean up intel_sanitize_crtc, v2

Matt Roper matthew.d.roper at intel.com
Tue Jun 9 18:58:06 PDT 2015


On Thu, Jun 04, 2015 at 02:47:33PM +0200, Maarten Lankhorst wrote:
> Instead of breaking all connections manually, kill them with
> atomic modeset, if it happens. Now that the everything's atomic
> some code becomes obsolete.
> 
> Forcing a atomic modeset with null mode and all connectors gone
> updates the state too, in a cleaner way.
> 
> Because load detection is atomic too there can be no mismatch between
> crtc->active and crtc->state->active
> 
> Changes since v1:
> - Reword commit message.
> - Set null mode and break all connectors when force disabling crtc.
> 
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c  |   8 +--
>  drivers/gpu/drm/i915/intel_display.c | 108 ++++++++++++++++-------------------
>  drivers/gpu/drm/i915/intel_drv.h     |   2 +-
>  3 files changed, 53 insertions(+), 65 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 51fe0fbcd00c..db23916c1875 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -3637,7 +3637,7 @@ static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
>  		bool active = pipe_config->base.active;
>  
>  		if (active) {
> -			intel_crtc_control(&crtc->base, false);
> +			intel_crtc_control(&crtc->base, false, false);
>  			pipe_config = to_intel_crtc_state(crtc->base.state);
>  		}
>  
> @@ -3647,7 +3647,7 @@ static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
>  					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
>  
>  		if (active)
> -			intel_crtc_control(&crtc->base, true);
> +			intel_crtc_control(&crtc->base, true, false);
>  	}
>  	drm_modeset_unlock_all(dev);
>  }
> @@ -3671,7 +3671,7 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
>  		bool active = pipe_config->base.active;
>  
>  		if (active) {
> -			intel_crtc_control(&crtc->base, false);
> +			intel_crtc_control(&crtc->base, false, false);
>  			pipe_config = to_intel_crtc_state(crtc->base.state);
>  		}
>  
> @@ -3681,7 +3681,7 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
>  					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
>  
>  		if (active)
> -			intel_crtc_control(&crtc->base, true);
> +			intel_crtc_control(&crtc->base, true, false);
>  	}
>  	drm_modeset_unlock_all(dev);
>  }
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 0f031658a297..1936a28a57c1 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -6192,7 +6192,7 @@ free:
>  }
>  
>  /* Master function to enable/disable CRTC and corresponding power wells */
> -int intel_crtc_control(struct drm_crtc *crtc, bool enable)
> +int intel_crtc_control(struct drm_crtc *crtc, bool active, bool force)

I realize intel_display.c hasn't been fully kerneldoc-ized yet, but this
function seems like an important one to have a description of what it's
doing and what the parameters mean (the term 'force' is a bit
vague/generic and it may not be immediately obvious to a reader that
what you're doing here is going to wind up detaching the links.


Matt


>  {
>  	struct drm_device *dev = crtc->dev;
>  	struct drm_mode_config *config = &dev->mode_config;
> @@ -6202,10 +6202,13 @@ int intel_crtc_control(struct drm_crtc *crtc, bool enable)
>  	struct drm_atomic_state *state;
>  	int ret;
>  
> -	if (enable == intel_crtc->active)
> +	if (WARN_ON(active && force))
> +		return -EINVAL;
> +
> +	if (active == intel_crtc->active)
>  		return 0;
>  
> -	if (enable && !crtc->state->enable)
> +	if (active && !crtc->state->enable)
>  		return 0;
>  
>  	/* this function should be called with drm_modeset_lock_all for now */
> @@ -6225,7 +6228,30 @@ int intel_crtc_control(struct drm_crtc *crtc, bool enable)
>  		ret = PTR_ERR(pipe_config);
>  		goto err;
>  	}
> -	pipe_config->base.active = enable;
> +	pipe_config->base.active = active;
> +	if (force) {
> +		struct drm_connector *connector;
> +
> +		ret = drm_atomic_set_mode_for_crtc(&pipe_config->base, NULL);
> +		if (ret)
> +			goto err;
> +
> +		list_for_each_entry(connector, &config->connector_list, head) {
> +			struct drm_connector_state *conn_state;
> +
> +			if (connector->state->crtc != crtc)
> +				continue;
> +
> +			conn_state = drm_atomic_get_connector_state(state, connector);
> +			if (IS_ERR(conn_state)) {
> +				ret = PTR_ERR(conn_state);
> +				goto err;
> +			}
> +			ret = drm_atomic_set_crtc_for_connector(conn_state, NULL);
> +			if (ret)
> +				goto err;
> +		}
> +	}
>  
>  	ret = intel_set_mode(state);
>  	if (!ret)
> @@ -6249,7 +6275,7 @@ void intel_crtc_update_dpms(struct drm_crtc *crtc)
>  	for_each_encoder_on_crtc(dev, crtc, intel_encoder)
>  		enable |= intel_encoder->connectors_active;
>  
> -	intel_crtc_control(crtc, enable);
> +	intel_crtc_control(crtc, enable, false);
>  }
>  
>  void intel_encoder_destroy(struct drm_encoder *encoder)
> @@ -14812,11 +14838,14 @@ intel_check_plane_mapping(struct intel_crtc *crtc)
>  	return true;
>  }
>  
> -static void intel_sanitize_crtc(struct intel_crtc *crtc)
> +static void intel_sanitize_crtc(struct intel_crtc *crtc,
> +				struct intel_crtc_state *pipe_config)
>  {
>  	struct drm_device *dev = crtc->base.dev;
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_encoder *intel_encoder;
>  	u32 reg;
> +	bool enable;
>  
>  	/* Clear any frame start delays used for debugging left by the BIOS */
>  	reg = PIPECONF(crtc->config->cpu_transcoder);
> @@ -14833,7 +14862,6 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
>  	 * disable the crtc (and hence change the state) if it is wrong. Note
>  	 * that gen4+ has a fixed plane -> pipe mapping.  */
>  	if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
> -		struct intel_connector *connector;
>  		bool plane;
>  
>  		DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
> @@ -14846,33 +14874,12 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
>  		to_intel_plane_state(crtc->base.primary->state)->visible = true;
>  		crtc->base.primary->crtc = &crtc->base;
>  		crtc->plane = !plane;
> -		intel_crtc_control(&crtc->base, false);
> +		intel_crtc_control(&crtc->base, false, true);
>  		crtc->plane = plane;
> -
> -		/* ... and break all links. */
> -		for_each_intel_connector(dev, connector) {
> -			if (connector->encoder->base.crtc != &crtc->base)
> -				continue;
> -
> -			connector->base.dpms = DRM_MODE_DPMS_OFF;
> -			connector->base.encoder = NULL;
> -		}
> -		/* multiple connectors may have the same encoder:
> -		 *  handle them and break crtc link separately */
> -		for_each_intel_connector(dev, connector)
> -			if (connector->encoder->base.crtc == &crtc->base) {
> -				connector->encoder->base.crtc = NULL;
> -				connector->encoder->connectors_active = false;
> -			}
> -
> -		WARN_ON(crtc->active);
> -		crtc->base.state->enable = false;
> -		crtc->base.state->active = false;
> -		crtc->base.enabled = false;
>  	}
>  
>  	if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
> -	    crtc->pipe == PIPE_A && !crtc->active) {
> +	    crtc->pipe == PIPE_A && (!pipe_config || !pipe_config->base.active)) {
>  		/* BIOS forgot to enable pipe A, this mostly happens after
>  		 * resume. Force-enable the pipe to fix this, the update_dpms
>  		 * call below we restore the pipe to the right state, but leave
> @@ -14881,36 +14888,16 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
>  	}
>  
>  	/* Adjust the state of the output pipe according to whether we
> -	 * have active connectors/encoders. */
> -	intel_crtc_update_dpms(&crtc->base);
> -
> -	if (crtc->active != crtc->base.state->active) {
> -		struct intel_encoder *encoder;
> +	 * have active connectors/encoders */
> +	enable = false;
> +	for_each_encoder_on_crtc(dev, &crtc->base, intel_encoder)
> +		enable |= intel_encoder->connectors_active;
>  
> -		/* This can happen either due to bugs in the get_hw_state
> -		 * functions or because the pipe is force-enabled due to the
> -		 * pipe A quirk. */
> -		DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
> -			      crtc->base.base.id,
> -			      crtc->base.state->enable ? "enabled" : "disabled",
> -			      crtc->active ? "enabled" : "disabled");
> -
> -		crtc->base.state->enable = crtc->active;
> -		crtc->base.state->active = crtc->active;
> -		crtc->base.enabled = crtc->active;
> -
> -		/* Because we only establish the connector -> encoder ->
> -		 * crtc links if something is active, this means the
> -		 * crtc is now deactivated. Break the links. connector
> -		 * -> encoder links are only establish when things are
> -		 *  actually up, hence no need to break them. */
> -		WARN_ON(crtc->active);
> -
> -		for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
> -			WARN_ON(encoder->connectors_active);
> -			encoder->base.crtc = NULL;
> -		}
> -	}
> +	/* only turn off separately if configuration's not restored,
> +	 * if it's restored it will change mode or turn off anyway.
> +	 */
> +	if (!enable && crtc->base.state->active && !pipe_config)
> +		intel_crtc_control(&crtc->base, false, true);
>  
>  	if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
>  		/*
> @@ -15278,7 +15265,8 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
>  				      &crtc->state->adjusted_mode);
>  		}
>  
> -		intel_sanitize_crtc(intel_crtc);
> +		intel_sanitize_crtc(intel_crtc, !force_restore ? NULL :
> +				    to_intel_crtc_state(crtc_state));
>  
>  		/*
>  		 * sanitize_crtc may have forced an update of crtc->state,
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 807e001e4cee..ec721e31eae8 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -993,7 +993,7 @@ void intel_mark_busy(struct drm_device *dev);
>  void intel_mark_idle(struct drm_device *dev);
>  void intel_crtc_restore_mode(struct drm_crtc *crtc);
>  int intel_display_suspend(struct drm_device *dev);
> -int intel_crtc_control(struct drm_crtc *crtc, bool enable);
> +int intel_crtc_control(struct drm_crtc *crtc, bool active, bool force);
>  void intel_crtc_update_dpms(struct drm_crtc *crtc);
>  void intel_encoder_destroy(struct drm_encoder *encoder);
>  int intel_connector_init(struct intel_connector *);
> -- 
> 2.1.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795


More information about the Intel-gfx mailing list