[Intel-gfx] [PATCH 4/4] drm/i915: Only enable cursor if it can be enabled.
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Fri Jun 12 03:32:24 PDT 2015
Op 12-06-15 om 12:26 schreef Ville Syrjälä:
> On Fri, Jun 12, 2015 at 11:15:42AM +0200, Maarten Lankhorst wrote:
>> The cursor should only be enabled if it's visible. This fixes
>> igt/kms_cursor_crc, which may otherwise produce the following
>> warning:
>>
>> ------------[ cut here ]------------
>> WARNING: CPU: 0 PID: 3425 at drivers/gpu/drm/i915/intel_display.c:9995 intel_crtc_update_cursor+0x14c/0x4d0 [i915]()
>> Missing switch case (0) in i9xx_update_cursor
>> Modules linked in: i915
>> CPU: 0 PID: 3425 Comm: kms_cursor_crc Tainted: G W 4.1.0-rc7-patser+ #4079
>> Hardware name: LENOVO 2349AV8/2349AV8, BIOS G1ETA5WW (2.65 ) 04/15/2014
>> ffffffffc01aad10 ffff8800b083faa8 ffffffff817f7827 0000000080000001
>> ffff8800b083faf8 ffff8800b083fae8 ffffffff81084955 ffff8800b083fad8
>> ffff8800c4931148 0000000001200000 ffff8800c48b0000 0000000000000000
>> Call Trace:
>> [<ffffffff817f7827>] dump_stack+0x4f/0x7b
>> [<ffffffff81084955>] warn_slowpath_common+0x85/0xc0
>> [<ffffffff810849d1>] warn_slowpath_fmt+0x41/0x50
>> [<ffffffffc0139f2c>] intel_crtc_update_cursor+0x14c/0x4d0 [i915]
>> [<ffffffffc01497f4>] __intel_set_mode+0x6c4/0x750 [i915]
>> [<ffffffffc0150143>] intel_crtc_set_config+0x473/0x5c0 [i915]
>> [<ffffffff81467da9>] drm_mode_set_config_internal+0x69/0x120
>> [<ffffffff8146c1b9>] drm_mode_setcrtc+0x189/0x540
>> [<ffffffff8145c7e0>] drm_ioctl+0x1a0/0x6a0
>> [<ffffffff810b3b41>] ? get_parent_ip+0x11/0x50
>> [<ffffffff811e9c28>] do_vfs_ioctl+0x2f8/0x530
>> [<ffffffff810d0f7d>] ? trace_hardirqs_on+0xd/0x10
>> [<ffffffff812e7746>] ? selinux_file_ioctl+0x56/0x100
>> [<ffffffff811e9ee1>] SyS_ioctl+0x81/0xa0
>> [<ffffffff81801617>] system_call_fastpath+0x12/0x6f
>> ---[ end trace abf0f71163290a96 ]---
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>> ---
>> drivers/gpu/drm/i915/intel_display.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index 14ccf49b9067..afe91a8f7e36 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -4748,7 +4748,8 @@ static void intel_crtc_enable_planes(struct drm_crtc *crtc)
>>
>> intel_enable_primary_hw_plane(crtc->primary, crtc);
>> intel_enable_sprite_planes(crtc);
>> - intel_crtc_update_cursor(crtc, true);
>> + if (to_intel_plane_state(crtc->cursor->state)->visible)
>> + intel_crtc_update_cursor(crtc, true);
> Can we actually trust it now? Last time I looked we couldn't, and
> Daniel didn't want my fixes to make it so.
>
> So if we can't trust 'visible' I suppose you should just do
> something a bit more ugly and look at 'crtc_w' or something.
>
We add all planes during a modeset, so state->visible should be sane.
More information about the Intel-gfx
mailing list