[Intel-gfx] [PATCH v3 15/19] drm/i915: atomic plane updates in a nutshell
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Mon Jun 15 03:33:52 PDT 2015
Now that all planes are added during a modeset we can use the
calculated changes before disabling a plane, and then either commit
or force disable a plane before disabling the crtc.
The code is shared with atomic_begin/flush, except watermark updating
and vblank evasion are not used.
This is needed for proper atomic suspend/resume support.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90868
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 103 ++++++++---------------------------
drivers/gpu/drm/i915/intel_sprite.c | 4 +-
2 files changed, 23 insertions(+), 84 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index cc4ca4970716..beb69281f45c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2217,28 +2217,6 @@ static void intel_disable_pipe(struct intel_crtc *crtc)
intel_wait_for_pipe_off(crtc);
}
-/**
- * intel_enable_primary_hw_plane - enable the primary plane on a given pipe
- * @plane: plane to be enabled
- * @crtc: crtc for the plane
- *
- * Enable @plane on @crtc, making sure that the pipe is running first.
- */
-static void intel_enable_primary_hw_plane(struct drm_plane *plane,
- struct drm_crtc *crtc)
-{
- struct drm_device *dev = plane->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
- /* If the pipe isn't enabled, we can't pump pixels and may hang */
- assert_pipe_enabled(dev_priv, intel_crtc->pipe);
- to_intel_plane_state(plane->state)->visible = true;
-
- dev_priv->display.update_primary_plane(crtc, plane->fb,
- crtc->x, crtc->y);
-}
-
static bool need_vtd_wa(struct drm_device *dev)
{
#ifdef CONFIG_INTEL_IOMMU
@@ -4508,20 +4486,6 @@ static void ironlake_pfit_enable(struct intel_crtc *crtc)
}
}
-static void intel_enable_sprite_planes(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- enum pipe pipe = to_intel_crtc(crtc)->pipe;
- struct drm_plane *plane;
- struct intel_plane *intel_plane;
-
- drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
- intel_plane = to_intel_plane(plane);
- if (intel_plane->pipe == pipe)
- intel_plane_restore(&intel_plane->base);
- }
-}
-
void hsw_enable_ips(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
@@ -4817,27 +4781,6 @@ static void intel_pre_plane_update(struct intel_crtc *crtc)
intel_pre_disable_primary(&crtc->base);
}
-static void intel_crtc_enable_planes(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
-
- intel_enable_primary_hw_plane(crtc->primary, crtc);
- intel_enable_sprite_planes(crtc);
- if (to_intel_plane_state(crtc->cursor->state)->visible)
- intel_crtc_update_cursor(crtc, true);
-
- intel_post_enable_primary(crtc);
-
- /*
- * FIXME: Once we grow proper nuclear flip support out of this we need
- * to compute the mask of flip planes precisely. For the time being
- * consider this a flip to a NULL plane.
- */
- intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
-}
-
static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned plane_mask)
{
struct drm_device *dev = crtc->dev;
@@ -4845,10 +4788,6 @@ static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned plane_mask
struct drm_plane *p;
int pipe = intel_crtc->pipe;
- intel_crtc_wait_for_pending_flips(crtc);
-
- intel_pre_disable_primary(crtc);
-
intel_crtc_dpms_overlay_disable(intel_crtc);
drm_for_each_plane_mask(p, dev, plane_mask)
@@ -6270,6 +6209,11 @@ static void intel_crtc_disable_noatomic(struct drm_crtc *crtc)
if (!intel_crtc->active)
return;
+ if (to_intel_plane_state(crtc->primary->state)->visible) {
+ intel_crtc_wait_for_pending_flips(crtc);
+ intel_pre_disable_primary(crtc);
+ }
+
intel_crtc_disable_planes(crtc, crtc->state->plane_mask);
dev_priv->display.crtc_disable(crtc);
@@ -11783,10 +11727,6 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
if (old_plane_state->base.fb && !fb)
intel_crtc->atomic.disabled_planes |= 1 << i;
- /* don't run rest during modeset yet */
- if (!intel_crtc->active || mode_changed)
- return 0;
-
was_visible = old_plane_state->visible;
visible = to_intel_plane_state(plane_state)->visible;
@@ -13255,15 +13195,18 @@ static int __intel_set_mode(struct drm_atomic_state *state)
drm_atomic_helper_swap_state(dev, state);
for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
if (!needs_modeset(crtc->state))
continue;
any_ms = true;
- if (!crtc_state->active)
- continue;
+ intel_pre_plane_update(intel_crtc);
- intel_crtc_disable_planes(crtc, crtc_state->plane_mask);
- dev_priv->display.crtc_disable(crtc);
+ if (crtc_state->active) {
+ intel_crtc_disable_planes(crtc, crtc_state->plane_mask);
+ dev_priv->display.crtc_disable(crtc);
+ }
}
/* Only after disabling all output pipelines that will be changed can we
@@ -13277,15 +13220,12 @@ static int __intel_set_mode(struct drm_atomic_state *state)
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
for_each_crtc_in_state(state, crtc, crtc_state, i) {
- drm_atomic_helper_commit_planes_on_crtc(crtc_state);
-
- if (!needs_modeset(crtc->state) || !crtc->state->active)
- continue;
-
- update_scanline_offset(to_intel_crtc(crtc));
+ if (needs_modeset(crtc->state) && crtc->state->active) {
+ update_scanline_offset(to_intel_crtc(crtc));
+ dev_priv->display.crtc_enable(crtc);
+ }
- dev_priv->display.crtc_enable(crtc);
- intel_crtc_enable_planes(crtc);
+ drm_atomic_helper_commit_planes_on_crtc(crtc_state);
}
/* FIXME: add subpixel order */
@@ -13858,7 +13798,7 @@ intel_commit_primary_plane(struct drm_plane *plane,
crtc->x = src->x1 >> 16;
crtc->y = src->y1 >> 16;
- if (!intel_crtc->active)
+ if (!crtc->state->active)
return;
if (state->visible)
@@ -13885,7 +13825,8 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc,
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- intel_pre_plane_update(intel_crtc);
+ if (!needs_modeset(crtc->state))
+ intel_pre_plane_update(intel_crtc);
if (intel_crtc->atomic.update_wm)
intel_update_watermarks(crtc);
@@ -13893,7 +13834,7 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc,
intel_runtime_pm_get(dev_priv);
/* Perform vblank evasion around commit operation */
- if (crtc->state->active && !needs_modeset(crtc->state))
+ if (crtc->state->active)
intel_crtc->atomic.evade =
intel_pipe_update_start(intel_crtc,
&intel_crtc->atomic.start_vbl_count);
@@ -14102,7 +14043,7 @@ intel_commit_cursor_plane(struct drm_plane *plane,
intel_crtc->cursor_bo = obj;
update:
- if (intel_crtc->active)
+ if (crtc->state->active)
intel_crtc_update_cursor(crtc, state->visible);
}
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index f7eb3bd0a7c7..168f90f346c2 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -921,16 +921,14 @@ intel_commit_sprite_plane(struct drm_plane *plane,
struct intel_plane_state *state)
{
struct drm_crtc *crtc = state->base.crtc;
- struct intel_crtc *intel_crtc;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct drm_framebuffer *fb = state->base.fb;
crtc = crtc ? crtc : plane->crtc;
- intel_crtc = to_intel_crtc(crtc);
plane->fb = fb;
- if (!intel_crtc->active)
+ if (!crtc->state->active)
return;
if (state->visible) {
--
2.1.0
More information about the Intel-gfx
mailing list