[Intel-gfx] [PATCH v2 1/3] drm/i915: Don't check modeset state in the hw state force restore path
Jani Nikula
jani.nikula at linux.intel.com
Wed Jun 17 05:04:25 PDT 2015
On Tue, 16 Jun 2015, Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com> wrote:
> Since the force restore logic will restore the CRTCs state one at a
> time, it is possible that the state will be inconsistent until the whole
> operation finishes. A call to intel_modeset_check_state() is done once
> it's over, so don't check the state multiple times in between. This
> regression was introduced in:
>
> commit 7f27126ea3db6ade886f18fd39caf0ff0cd1d37f
> Author: Jesse Barnes <jbarnes at virtuousgeek.org>
> Date: Wed Nov 5 14:26:06 2014 -0800
>
> drm/i915: factor out compute_config from __intel_set_mode v3
>
> v2: Rename check parameter to force_restore. (Matt)
>
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94431
> Cc: Jesse Barnes <jbarnes at virtuousgeek.org>
> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
> Reviewed-by: Matt Roper <matthew.d.roper at intel.com>
All three patches applied to drm-intel-next-fixes, aiming for v4.2 merge
window. Thanks for the patches and review.
For drm-intel-nightly, I resolved the conflicts by ignoring these
changes and favoring what's in drm-intel-next-queued. Fingers crossed I
didn't botch it up!
BR,
Jani.
> ---
> drivers/gpu/drm/i915/intel_display.c | 21 ++++++++++++---------
> 1 file changed, 12 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 4e3f302..bcf1041 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -87,7 +87,8 @@ static void ironlake_pch_clock_get(struct intel_crtc *crtc,
> struct intel_crtc_state *pipe_config);
>
> static int intel_set_mode(struct drm_crtc *crtc,
> - struct drm_atomic_state *state);
> + struct drm_atomic_state *state,
> + bool force_restore);
> static int intel_framebuffer_init(struct drm_device *dev,
> struct intel_framebuffer *ifb,
> struct drm_mode_fb_cmd2 *mode_cmd,
> @@ -10096,7 +10097,7 @@ retry:
>
> drm_mode_copy(&crtc_state->base.mode, mode);
>
> - if (intel_set_mode(crtc, state)) {
> + if (intel_set_mode(crtc, state, true)) {
> DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
> if (old->release_fb)
> old->release_fb->funcs->destroy(old->release_fb);
> @@ -10170,7 +10171,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
> if (ret)
> goto fail;
>
> - ret = intel_set_mode(crtc, state);
> + ret = intel_set_mode(crtc, state, true);
> if (ret)
> goto fail;
>
> @@ -12646,20 +12647,22 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
> }
>
> static int intel_set_mode_with_config(struct drm_crtc *crtc,
> - struct intel_crtc_state *pipe_config)
> + struct intel_crtc_state *pipe_config,
> + bool force_restore)
> {
> int ret;
>
> ret = __intel_set_mode(crtc, pipe_config);
>
> - if (ret == 0)
> + if (ret == 0 && force_restore)
> intel_modeset_check_state(crtc->dev);
>
> return ret;
> }
>
> static int intel_set_mode(struct drm_crtc *crtc,
> - struct drm_atomic_state *state)
> + struct drm_atomic_state *state,
> + bool force_restore)
> {
> struct intel_crtc_state *pipe_config;
> int ret = 0;
> @@ -12670,7 +12673,7 @@ static int intel_set_mode(struct drm_crtc *crtc,
> goto out;
> }
>
> - ret = intel_set_mode_with_config(crtc, pipe_config);
> + ret = intel_set_mode_with_config(crtc, pipe_config, force_restore);
> if (ret)
> goto out;
>
> @@ -12747,7 +12750,7 @@ void intel_crtc_restore_mode(struct drm_crtc *crtc)
> intel_modeset_setup_plane_state(state, crtc, &crtc->mode,
> crtc->primary->fb, crtc->x, crtc->y);
>
> - ret = intel_set_mode(crtc, state);
> + ret = intel_set_mode(crtc, state, false);
> if (ret)
> drm_atomic_state_free(state);
> }
> @@ -12947,7 +12950,7 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
>
> primary_plane_was_visible = primary_plane_visible(set->crtc);
>
> - ret = intel_set_mode_with_config(set->crtc, pipe_config);
> + ret = intel_set_mode_with_config(set->crtc, pipe_config, true);
>
> if (ret == 0 &&
> pipe_config->base.enable &&
> --
> 2.1.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list