[Intel-gfx] [RFC PATCH 5/7] drm/i915: Update power domains only on affected crtc's.

Maarten Lankhorst maarten.lankhorst at linux.intel.com
Fri Jun 19 01:02:28 PDT 2015


Use for_each_crtc_state to only touch affected crtc's.
In order to make sure that the initial power is still set
correctly we make sure modeset_update_crtc_power_domains is called
during the initial modeset.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 44 ++++++++++++++++++++++++------------
 1 file changed, 29 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index de975ef09e23..942d25e7490a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5197,30 +5197,35 @@ static unsigned long get_crtc_power_domains(struct drm_crtc *crtc)
 	return mask;
 }
 
-static void modeset_update_crtc_power_domains(struct drm_atomic_state *state)
+static void modeset_update_crtc_power_domains(struct drm_atomic_state *state,
+					      bool power_only)
 {
 	struct drm_device *dev = state->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long pipe_domains[I915_MAX_PIPES] = { 0, };
-	struct intel_crtc *crtc;
+	unsigned long pipe_domains[I915_MAX_PIPES] = { 0, }, domains;
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+	int i;
 
 	/*
 	 * First get all needed power domains, then put all unneeded, to avoid
 	 * any unnecessary toggling of the power wells.
 	 */
-	for_each_intel_crtc(dev, crtc) {
+	for_each_crtc_in_state(state, crtc, crtc_state, i) {
 		enum intel_display_power_domain domain;
+		enum pipe pipe = to_intel_crtc(crtc)->pipe;
 
-		if (!crtc->base.state->enable)
+		if (!crtc->state->active)
 			continue;
 
-		pipe_domains[crtc->pipe] = get_crtc_power_domains(&crtc->base);
+		domains = pipe_domains[pipe] = get_crtc_power_domains(crtc);
+		domains &= ~to_intel_crtc(crtc)->enabled_power_domains;
 
-		for_each_power_domain(domain, pipe_domains[crtc->pipe])
+		for_each_power_domain(domain, domains)
 			intel_display_power_get(dev_priv, domain);
 	}
 
-	if (dev_priv->display.modeset_commit_cdclk) {
+	if (!power_only && dev_priv->display.modeset_commit_cdclk) {
 		unsigned int cdclk = to_intel_atomic_state(state)->cdclk;
 
 		if (cdclk != dev_priv->cdclk_freq &&
@@ -5228,16 +5233,19 @@ static void modeset_update_crtc_power_domains(struct drm_atomic_state *state)
 			dev_priv->display.modeset_commit_cdclk(state);
 	}
 
-	for_each_intel_crtc(dev, crtc) {
+	for_each_crtc_in_state(state, crtc, crtc_state, i) {
+		struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+		enum pipe pipe = intel_crtc->pipe;
 		enum intel_display_power_domain domain;
 
-		for_each_power_domain(domain, crtc->enabled_power_domains)
-			intel_display_power_put(dev_priv, domain);
+		domains = intel_crtc->enabled_power_domains;
+		domains &= ~pipe_domains[pipe];
 
-		crtc->enabled_power_domains = pipe_domains[crtc->pipe];
-	}
+		intel_crtc->enabled_power_domains = pipe_domains[pipe];
 
-	intel_display_set_init_power(dev_priv, false);
+		for_each_power_domain(domain, domains)
+			intel_display_power_put(dev_priv, domain);
+	}
 }
 
 static void intel_update_max_cdclk(struct drm_device *dev)
@@ -13115,7 +13123,7 @@ static int __intel_set_mode(struct drm_atomic_state *state)
 	/* The state has been swaped above, so state actually contains the
 	 * old state now. */
 	if (any_ms)
-		modeset_update_crtc_power_domains(state);
+		modeset_update_crtc_power_domains(state, false);
 
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
 	for_each_crtc_in_state(state, crtc, crtc_state, i) {
@@ -15606,6 +15614,7 @@ intel_modeset_setup_hw_state(struct drm_device *dev, bool force_restore)
 		return NULL;
 	}
 
+	/* swap sw/hw state */
 	drm_atomic_helper_swap_state(dev, state);
 
 	if (force_restore) {
@@ -15619,6 +15628,9 @@ intel_modeset_setup_hw_state(struct drm_device *dev, bool force_restore)
 		to_intel_atomic_state(state)->dpll_set = false;
 	}
 
+	/* update power state to match hw state */
+	modeset_update_crtc_power_domains(state, true);
+
 	/* HW state is read out, now we need to sanitize this mess. */
 	for_each_intel_encoder(dev, encoder) {
 		intel_sanitize_encoder(encoder);
@@ -15697,6 +15709,8 @@ intel_modeset_setup_hw_state(struct drm_device *dev, bool force_restore)
 		drm_atomic_state_free(state);
 	}
 
+	intel_display_set_init_power(dev_priv, false);
+
 	intel_modeset_check_state(dev);
 	return NULL;
 }
-- 
2.1.0



More information about the Intel-gfx mailing list