[Intel-gfx] [PATCH 2/5] drm/i915/bxt: add missing DDI PLL registers to the state checking

Jindal, Sonika sonika.jindal at intel.com
Wed Jun 24 03:07:06 PDT 2015



On 6/18/2015 7:55 PM, Imre Deak wrote:
> Although we have a fixed setting for the PLL9 and EBB4 registers, it
> still makes sense to check them together with the rest of PLL registers.
>
> While at it also remove a redundant comment about 10 bit clock enabling.
>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
> ---
>   drivers/gpu/drm/i915/i915_drv.h      |  3 ++-
>   drivers/gpu/drm/i915/i915_reg.h      |  3 ++-
>   drivers/gpu/drm/i915/intel_ddi.c     | 16 +++++++++++++---
>   drivers/gpu/drm/i915/intel_display.c |  6 ++++--
>   4 files changed, 21 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 491ef0c..bf235ff 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -366,7 +366,8 @@ struct intel_dpll_hw_state {
>   	uint32_t cfgcr1, cfgcr2;
>
>   	/* bxt */
> -	uint32_t ebb0, pll0, pll1, pll2, pll3, pll6, pll8, pll10, pcsdw12;
> +	uint32_t ebb0, ebb4, pll0, pll1, pll2, pll3, pll6, pll8, pll9, pll10,
> +		 pcsdw12;
>   };
>
>   struct intel_shared_dpll_config {
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 4bbc85a..bba0691 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1207,7 +1207,8 @@ enum skl_disp_power_wells {
>   /* PORT_PLL_8_A */
>   #define   PORT_PLL_TARGET_CNT_MASK	0x3FF
>   /* PORT_PLL_9_A */
> -#define  PORT_PLL_LOCK_THRESHOLD_MASK	0xe
> +#define  PORT_PLL_LOCK_THRESHOLD_SHIFT	1
> +#define  PORT_PLL_LOCK_THRESHOLD_MASK	(0x7 << PORT_PLL_LOCK_THRESHOLD_SHIFT)
>   /* PORT_PLL_10_A */
>   #define  PORT_PLL_DCO_AMP_OVR_EN_H	(1<<27)
>   #define  PORT_PLL_DCO_AMP_MASK		0x3c00
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index bdc5677..ca970ba 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1476,11 +1476,15 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
>
>   	crtc_state->dpll_hw_state.pll8 = targ_cnt;
>
> +	crtc_state->dpll_hw_state.pll9 = 5 << PORT_PLL_LOCK_THRESHOLD_SHIFT;
> +
>   	if (dcoampovr_en_h)
>   		crtc_state->dpll_hw_state.pll10 = PORT_PLL_DCO_AMP_OVR_EN_H;
>
>   	crtc_state->dpll_hw_state.pll10 |= PORT_PLL_DCO_AMP(dco_amp);
>
> +	crtc_state->dpll_hw_state.ebb4 = PORT_PLL_10BIT_CLK_ENABLE;
You can add " | PORT_PLL_RECALIBRATE" and check for this one as well in 
bxt_ddi_pll_get_hw_state.

> +
>   	crtc_state->dpll_hw_state.pcsdw12 =
>   		LANESTAGGER_STRAP_OVRD | lanestagger;
>
> @@ -2414,7 +2418,7 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv,
>
>   	temp = I915_READ(BXT_PORT_PLL(port, 9));
>   	temp &= ~PORT_PLL_LOCK_THRESHOLD_MASK;
> -	temp |= (5 << 1);
> +	temp |= pll->config.hw_state.pll9;
>   	I915_WRITE(BXT_PORT_PLL(port, 9), temp);
>
>   	temp = I915_READ(BXT_PORT_PLL(port, 10));
> @@ -2427,8 +2431,8 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv,
>   	temp = I915_READ(BXT_PORT_PLL_EBB_4(port));
>   	temp |= PORT_PLL_RECALIBRATE;
>   	I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp);
> -	/* Enable 10 bit clock */
I think it is OK to keep this comment here because all the steps are 
mentioned in comments, even "disable 10 bit clock".

> -	temp |= PORT_PLL_10BIT_CLK_ENABLE;
> +	temp &= ~PORT_PLL_10BIT_CLK_ENABLE;
> +	temp |= pll->config.hw_state.ebb4;
>   	I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp);
>
>   	/* Enable PLL */
> @@ -2481,6 +2485,9 @@ static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
>   	hw_state->ebb0 = I915_READ(BXT_PORT_PLL_EBB_0(port));
>   	hw_state->ebb0 &= PORT_PLL_P1_MASK | PORT_PLL_P2_MASK;
>
> +	hw_state->ebb4 = I915_READ(BXT_PORT_PLL_EBB_4(port));
> +	hw_state->ebb4 &= PORT_PLL_10BIT_CLK_ENABLE;
> +
>   	hw_state->pll0 = I915_READ(BXT_PORT_PLL(port, 0));
>   	hw_state->pll0 &= PORT_PLL_M2_MASK;
>
> @@ -2501,6 +2508,9 @@ static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
>   	hw_state->pll8 = I915_READ(BXT_PORT_PLL(port, 8));
>   	hw_state->pll8 &= PORT_PLL_TARGET_CNT_MASK;
>
> +	hw_state->pll9 = I915_READ(BXT_PORT_PLL(port, 9));
> +	hw_state->pll9 &= PORT_PLL_LOCK_THRESHOLD_MASK;
> +
>   	hw_state->pll10 = I915_READ(BXT_PORT_PLL(port, 10));
>   	hw_state->pll10 &= PORT_PLL_DCO_AMP_OVR_EN_H |
>   			   PORT_PLL_DCO_AMP_MASK;
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 9149410..6f79680 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -11905,17 +11905,19 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
>   	DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
>
>   	if (IS_BROXTON(dev)) {
> -		DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: ebb0: 0x%x, "
> +		DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: ebb0: 0x%x, ebb4: 0x%x,"
>   			      "pll0: 0x%x, pll1: 0x%x, pll2: 0x%x, pll3: 0x%x, "
> -			      "pll6: 0x%x, pll8: 0x%x, pcsdw12: 0x%x\n",
> +			      "pll6: 0x%x, pll8: 0x%x, pll9: 0x%x, pcsdw12: 0x%x\n",
>   			      pipe_config->ddi_pll_sel,
>   			      pipe_config->dpll_hw_state.ebb0,
> +			      pipe_config->dpll_hw_state.ebb4,
>   			      pipe_config->dpll_hw_state.pll0,
>   			      pipe_config->dpll_hw_state.pll1,
>   			      pipe_config->dpll_hw_state.pll2,
>   			      pipe_config->dpll_hw_state.pll3,
>   			      pipe_config->dpll_hw_state.pll6,
>   			      pipe_config->dpll_hw_state.pll8,
> +			      pipe_config->dpll_hw_state.pll9,
>   			      pipe_config->dpll_hw_state.pcsdw12);
>   	} else if (IS_SKYLAKE(dev)) {
>   		DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: "
>


More information about the Intel-gfx mailing list