[Intel-gfx] [PATCH 05/17 v2] drm/i915: GuC-specific firmware loader

Dave Gordon david.s.gordon at intel.com
Thu Jun 25 07:40:01 PDT 2015


From: Alex Dai <yu.dai at intel.com>

This uses the unified firmware loader to fetch the firmware image,
then loads it into the GuC's memory via a dedicated DMA engine.

This patch is derived from GuC loading work originally done by
Vinit Azad and Ben Widawsky. It has been reconstructed to accord
with the unified firmware loading mechanism by Dave Gordon as well
as new firmware layout etc.

v2:
    Various improvements per review comments by Chris Wilson

Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai at intel.com>
Signed-off-by: Dave Gordon <david.s.gordon at intel.com>
---
 drivers/gpu/drm/i915/Makefile           |    3 +
 drivers/gpu/drm/i915/i915_dma.c         |    4 +
 drivers/gpu/drm/i915/i915_drv.h         |   11 +
 drivers/gpu/drm/i915/i915_gem.c         |    3 +
 drivers/gpu/drm/i915/i915_reg.h         |    4 +-
 drivers/gpu/drm/i915/intel_guc.h        |   49 ++++
 drivers/gpu/drm/i915/intel_guc_loader.c |  440 +++++++++++++++++++++++++++++++
 7 files changed, 513 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/i915/intel_guc.h
 create mode 100644 drivers/gpu/drm/i915/intel_guc_loader.c

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index f1f80fc..62a8c83 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -42,6 +42,9 @@ i915-y += i915_cmd_parser.o \
 # generic ancilliary microcontroller support
 i915-y += intel_uc_loader.o
 
+# general-purpose microcontroller (GuC) support
+i915-y += intel_guc_loader.o
+
 # autogenerated null render state
 i915-y += intel_renderstate_gen6.o \
 	  intel_renderstate_gen7.o \
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index c5349fa..730d91b 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -469,6 +469,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
 
 cleanup_gem:
 	mutex_lock(&dev->struct_mutex);
+	intel_guc_ucode_fini(dev);
 	i915_gem_cleanup_ringbuffer(dev);
 	i915_gem_context_fini(dev);
 	mutex_unlock(&dev->struct_mutex);
@@ -866,6 +867,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
 	intel_uncore_init(dev);
 
+	intel_guc_ucode_init(dev);
+
 	/* Load CSR Firmware for SKL */
 	intel_csr_ucode_init(dev);
 
@@ -1117,6 +1120,7 @@ int i915_driver_unload(struct drm_device *dev)
 	flush_workqueue(dev_priv->wq);
 
 	mutex_lock(&dev->struct_mutex);
+	intel_guc_ucode_fini(dev);
 	i915_gem_cleanup_ringbuffer(dev);
 	i915_gem_context_fini(dev);
 	mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 0362f25..a3d2fd9 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -50,6 +50,7 @@
 #include <linux/intel-iommu.h>
 #include <linux/kref.h>
 #include <linux/pm_qos.h>
+#include "intel_guc.h"
 
 /* General customization:
  */
@@ -1676,6 +1677,8 @@ struct drm_i915_private {
 
 	struct i915_virtual_gpu vgpu;
 
+	struct intel_guc guc;
+
 	struct intel_csr csr;
 
 	/* Display CSR-related protection */
@@ -1920,6 +1923,11 @@ static inline struct drm_i915_private *dev_to_i915(struct device *dev)
 	return to_i915(dev_get_drvdata(dev));
 }
 
+static inline struct drm_i915_private *guc_to_i915(struct intel_guc *guc)
+{
+	return container_of(guc, struct drm_i915_private, guc);
+}
+
 /* Iterate over initialised rings */
 #define for_each_ring(ring__, dev_priv__, i__) \
 	for ((i__) = 0; (i__) < I915_NUM_RINGS; (i__)++) \
@@ -2520,6 +2528,9 @@ struct drm_i915_cmd_table {
 
 #define HAS_CSR(dev)	(IS_SKYLAKE(dev))
 
+#define HAS_GUC_UCODE(dev)	(IS_GEN9(dev))
+#define HAS_GUC_SCHED(dev)	(IS_GEN9(dev))
+
 #define INTEL_PCH_DEVICE_ID_MASK		0xff00
 #define INTEL_PCH_IBX_DEVICE_ID_TYPE		0x3b00
 #define INTEL_PCH_CPT_DEVICE_ID_TYPE		0x1c00
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index eb9be60..302d1bc 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -5073,6 +5073,9 @@ i915_gem_init_hw(struct drm_device *dev)
 			goto out;
 	}
 
+	/* We can't enable contexts until all firmware is loaded */
+	ret = intel_guc_ucode_load(dev, true);
+
 	/* Now it is safe to go back round and do everything else: */
 	for_each_ring(ring, dev_priv, i) {
 		struct drm_i915_gem_request *req;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index fa9ccb87..e85c8af 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6795,7 +6795,9 @@ enum skl_disp_power_wells {
 #define   GEN9_PGCTL_SSB_EU311_ACK	(1 << 14)
 
 #define GEN7_MISCCPCTL			(0x9424)
-#define   GEN7_DOP_CLOCK_GATE_ENABLE	(1<<0)
+#define   GEN7_DOP_CLOCK_GATE_ENABLE		(1<<0)
+#define   GEN8_DOP_CLOCK_GATE_CFCLK_ENABLE	(1<<2)
+#define   GEN8_DOP_CLOCK_GATE_GUC_ENABLE	(1<<4)
 
 /* IVYBRIDGE DPF */
 #define GEN7_L3CDERRST1			0xB008 /* L3CD Error Status 1 */
diff --git a/drivers/gpu/drm/i915/intel_guc.h b/drivers/gpu/drm/i915/intel_guc.h
new file mode 100644
index 0000000..1721af0
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_guc.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#ifndef _INTEL_GUC_H_
+#define _INTEL_GUC_H_
+
+#include "intel_uc_loader.h"
+#include "intel_guc_fwif.h"
+#include "i915_guc_reg.h"
+
+struct intel_guc {
+	/* Generic uC firmware management */
+	struct intel_uc_fw guc_fw;
+
+	/* GuC-specific additions */
+	uint16_t fw_major_wanted;
+	uint16_t fw_minor_wanted;
+	uint16_t fw_major_found;
+	uint16_t fw_minor_found;
+
+	uint32_t log_flags;
+};
+
+/* intel_guc_loader.c */
+extern void intel_guc_ucode_init(struct drm_device *dev);
+extern int intel_guc_ucode_load(struct drm_device *dev, bool wait);
+extern void intel_guc_ucode_fini(struct drm_device *dev);
+
+#endif
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
new file mode 100644
index 0000000..bf7e755
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -0,0 +1,440 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Vinit Azad <vinit.azad at intel.com>
+ *    Ben Widawsky <ben at bwidawsk.net>
+ *    Dave Gordon <david.s.gordon at intel.com>
+ *    Alex Dai <yu.dai at intel.com>
+ */
+#include <linux/firmware.h>
+#include "i915_drv.h"
+#include "intel_guc.h"
+
+/**
+ * DOC: GuC
+ *
+ * intel_guc:
+ * Top level structure of guc. It handles firmware loading and manages client
+ * pool and doorbells. intel_guc owns a i915_guc_client to replace the legacy
+ * ExecList submission.
+ *
+ * Firmware versioning:
+ * The firmware build process will generate a version header file with major and
+ * minor version defined. The versions are built into CSS header of firmware.
+ * i915 kernel driver set the minimal firmware version required per platform.
+ * The firmware installation package will install (symbolic link) proper version
+ * of firmware.
+ *
+ * GuC address space:
+ * GuC does not allow any gfx GGTT address that falls into range [0, WOPCM_TOP),
+ * which is reserved for Boot ROM, SRAM and WOPCM. Currently this top address is
+ * 512K. In order to exclude 0-512K address space from GGTT, all gfx objects
+ * used by GuC is pinned with PIN_OFFSET_BIAS along with size of WOPCM.
+ *
+ * Firmware log:
+ * Firmware log is enabled by setting i915.guc_log_level to non-negative level.
+ * Log data is printed out via reading debugfs i915_guc_log_dump. Reading from
+ * i915_guc_load_status will print out firmware loading status and scratch
+ * registers value.
+ *
+ */
+
+#define I915_SKL_GUC_UCODE "i915/skl_guc_ver3.bin"
+MODULE_FIRMWARE(I915_SKL_GUC_UCODE);
+
+static u32 get_gttype(struct drm_i915_private *dev_priv)
+{
+	/* XXX: GT type based on PCI device ID? field seems unused by fw */
+	return 0;
+}
+
+static u32 get_core_family(struct drm_i915_private *dev_priv)
+{
+	switch (INTEL_INFO(dev_priv)->gen) {
+	case 8:
+		return GFXCORE_FAMILY_GEN8;
+	case 9:
+		return GFXCORE_FAMILY_GEN9;
+	default:
+		DRM_ERROR("GUC: unknown gen for scheduler init\n");
+		return GFXCORE_FAMILY_FORCE_ULONG;
+	}
+}
+
+static void set_guc_init_params(struct drm_i915_private *dev_priv)
+{
+	struct intel_guc *guc = &dev_priv->guc;
+	u32 params[GUC_CTL_MAX_DWORDS];
+	int i;
+
+	memset(&params, 0, sizeof(params));
+
+	params[GUC_CTL_DEVICE_INFO] |=
+		(get_gttype(dev_priv) << GUC_CTL_GTTYPE_SHIFT) |
+		(get_core_family(dev_priv) << GUC_CTL_COREFAMILY_SHIFT);
+
+	/* GuC ARAT increment is 10 ns. GuC default scheduler quantum is one
+	 * second. This ARAR is calculated by:
+	 * Scheduler-Quantum-in-ns / ARAT-increment-in-ns = 1000000000 / 10
+	 */
+	params[GUC_CTL_ARAT_HIGH] = 0;
+	params[GUC_CTL_ARAT_LOW] = 100000000;
+
+	params[GUC_CTL_WA] |= GUC_CTL_WA_UK_BY_DRIVER;
+
+	params[GUC_CTL_FEATURE] |= GUC_CTL_DISABLE_SCHEDULER |
+			GUC_CTL_VCS2_ENABLED;
+
+	if (i915.guc_log_level >= 0) {
+		params[GUC_CTL_LOG_PARAMS] = guc->log_flags;
+		params[GUC_CTL_DEBUG] =
+			i915.guc_log_level << GUC_LOG_VERBOSITY_SHIFT;
+	}
+
+	I915_WRITE(SOFT_SCRATCH(0), 0);
+
+	for (i = 0; i < GUC_CTL_MAX_DWORDS; i++)
+		I915_WRITE(SOFT_SCRATCH(1 + i), params[i]);
+}
+
+/* Read GuC status register (GUC_STATUS)
+ * Return true if get a success code from normal boot or RC6 boot
+ */
+static inline bool guc_ucode_response(struct drm_i915_private *dev_priv,
+				      u32 *status)
+{
+	u32 val = I915_READ(GUC_STATUS);
+	*status = val;
+	return ((val & GS_UKERNEL_MASK) == GS_UKERNEL_READY ||
+		(val & GS_UKERNEL_MASK) == GS_UKERNEL_LAPIC_DONE);
+}
+
+/* Transfers the firmware image to RAM for execution by the microcontroller.
+ *
+ * GuC Firmware layout:
+ * +-------------------------------+  ----
+ * |          CSS header           |  128B
+ * | contains major/minor version  |
+ * +-------------------------------+  ----
+ * |             uCode             |
+ * +-------------------------------+  ----
+ * |         RSA signature         |  256B
+ * +-------------------------------+  ----
+ * |         RSA public Key        |  256B
+ * +-------------------------------+  ----
+ * |       Public key modulus      |    4B
+ * +-------------------------------+  ----
+ *
+ * Architecturally, the DMA engine is bidirectional, and in can potentially
+ * even transfer between GTT locations. This functionality is left out of the
+ * API for now as there is no need for it.
+ *
+ * Note that GuC needs the CSS header plus uKernel code to be copied by the
+ * DMA engine in one operation, whereas the RSA signature is loaded via MMIO.
+ */
+
+#define UOS_CSS_HEADER_OFFSET		0
+#define UOS_VER_MINOR_OFFSET		0x44
+#define UOS_VER_MAJOR_OFFSET		0x46
+#define UOS_CSS_HEADER_SIZE		0x80
+#define UOS_RSA_SIG_SIZE		0x100
+#define UOS_CSS_SIGNING_SIZE		0x204
+
+static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv)
+{
+	struct intel_uc_fw *guc_fw = &dev_priv->guc.guc_fw;
+	struct drm_i915_gem_object *fw_obj = guc_fw->uc_fw_obj;
+	unsigned long offset;
+	struct sg_table *sg = fw_obj->pages;
+	u32 status, ucode_size, rsa[UOS_RSA_SIG_SIZE / sizeof(u32)];
+	int i, ret = 0;
+
+	/* uCode size, also is where RSA signature starts */
+	offset = ucode_size = guc_fw->uc_fw_size - UOS_CSS_SIGNING_SIZE;
+
+	/* Copy RSA signature from the fw image to HW for verification */
+	sg_pcopy_to_buffer(sg->sgl, sg->nents, rsa, UOS_RSA_SIG_SIZE, offset);
+	for (i = 0; i < UOS_RSA_SIG_SIZE / sizeof(u32); i++)
+		I915_WRITE(UOS_RSA_SCRATCH_0 + i * sizeof(u32), rsa[i]);
+
+	/* Set the source address for the new blob */
+	offset = i915_gem_obj_ggtt_offset(fw_obj);
+	I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
+	I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
+
+	/* Set the destination. Current uCode expects an 8k stack starting from
+	 * offset 0. */
+	I915_WRITE(DMA_ADDR_1_LOW, 0x2000);
+
+	/* XXX: The image is automatically transfered to SRAM after the RSA
+	 * verification. This is why the address space is chosen as such. */
+	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
+
+	I915_WRITE(DMA_COPY_SIZE, ucode_size);
+
+	/* Finally start the DMA */
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
+
+	/*
+	 * Spin-wait for the DMA to complete & the GuC to start up.
+	 * NB: Docs recommend not using the interrupt for completion.
+	 * Measurements indicate this should take no more than 20ms, so a
+	 * timeout here indicates that the GuC has failed and is unusable.
+	 * (Higher levels of the driver will attempt to fall back to
+	 * execlist mode if this happens.)
+	 */
+	ret = wait_for_atomic(guc_ucode_response(dev_priv, &status), 100);
+
+	DRM_DEBUG_DRIVER("DMA status 0x%x, GuC status 0x%x\n",
+			I915_READ(DMA_CTRL), status);
+
+	if ((status & GS_BOOTROM_MASK) == GS_BOOTROM_RSA_FAILED) {
+		DRM_ERROR("%s firmware signature verification failed\n",
+			guc_fw->uc_name);
+		ret = -ENOEXEC;
+	}
+
+	DRM_DEBUG_DRIVER("returning %d\n", ret);
+
+	return ret;
+}
+
+/*
+ * Loads the GuC firmware blob in to the MinuteIA.
+ */
+static int guc_ucode_xfer(struct drm_i915_private *dev_priv)
+{
+	struct intel_uc_fw *guc_fw = &dev_priv->guc.guc_fw;
+	struct drm_device *dev = dev_priv->dev;
+	int ret;
+
+	ret = i915_gem_object_set_to_gtt_domain(guc_fw->uc_fw_obj, false);
+	if (ret) {
+		DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
+		return ret;
+	}
+
+	ret = i915_gem_obj_ggtt_pin(guc_fw->uc_fw_obj, 0, 0);
+	if (ret) {
+		DRM_DEBUG_DRIVER("pin failed %d\n", ret);
+		return ret;
+	}
+
+	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+	/* init WOPCM */
+	I915_WRITE(GUC_WOPCM_SIZE, GUC_WOPCM_SIZE_VALUE);
+	I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET);
+
+	/* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+	I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+	/* Set MMIO/WA for GuC init */
+	I915_WRITE(DRBMISC1, DOORBELL_ENABLE);
+
+	/* Enable MIA caching. GuC clock gating is disabled. */
+	I915_WRITE(GUC_SHIM_CONTROL, GUC_SHIM_CONTROL_VALUE);
+
+	/* WaC6DisallowByGfxPause*/
+	I915_WRITE(GEN6_GFXPAUSE, 0x30FFF);
+
+	if (IS_SKYLAKE(dev))
+		I915_WRITE(GEN9_GT_PM_CONFIG, GEN8_GT_DOORBELL_ENABLE);
+	else
+		I915_WRITE(GEN8_GT_PM_CONFIG, GEN8_GT_DOORBELL_ENABLE);
+
+	if (IS_GEN9(dev)) {
+		/* DOP Clock Gating Enable for GuC clocks */
+		I915_WRITE(GEN7_MISCCPCTL, (GEN8_DOP_CLOCK_GATE_GUC_ENABLE |
+					    I915_READ(GEN7_MISCCPCTL)));
+
+		/* allows for 5us before GT can go to RC6 */
+		I915_WRITE(GUC_ARAT_C6DIS, 0x1FF);
+	}
+
+	set_guc_init_params(dev_priv);
+
+	ret = guc_ucode_xfer_dma(dev_priv);
+
+	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+
+	/*
+	 * We keep the object pages for reuse during resume. But we can unpin it
+	 * now that DMA has completed, so it doesn't continue to take up space.
+	 */
+	i915_gem_object_ggtt_unpin(guc_fw->uc_fw_obj);
+
+	return ret;
+}
+
+/*
+ * Check the firmware that was found; if it's the wrong size or the wrong
+ * version, return FALSE. If it's OK, return TRUE; the generic loader code
+ * will then save the data for later in a pageable (tmpfs-backed) GEM object.
+ *
+ * The GuC firmware image has the version number embedded at a well-known
+ * offset within the firmware blob; note that major / minor version are
+ * TWO bytes each (i.e. u16), although all pointers and offsets are defined
+ * in terms of bytes (u8).
+ */
+static bool guc_ucode_check(struct intel_uc_fw *guc_fw)
+{
+	struct intel_guc *guc = container_of(guc_fw, struct intel_guc, guc_fw);
+	const u8 *css_header = guc_fw->uc_fw_blob->data + UOS_CSS_HEADER_OFFSET;
+	size_t blobsize = guc_fw->uc_fw_blob->size;
+	size_t minsize = UOS_CSS_HEADER_SIZE + UOS_CSS_SIGNING_SIZE;
+	size_t maxsize = GUC_WOPCM_SIZE_VALUE - 0x8000;	/* 32k reserved */
+
+	DRM_DEBUG_DRIVER("firmware file size %zu (minimum %zu, maximum %zu)\n",
+		blobsize, minsize, maxsize);
+
+	/* Check the size of the blob befoe examining buffer contents */
+	if (blobsize < minsize || blobsize > maxsize)
+		return false;
+
+	guc->fw_major_found = *(u16 *)(css_header + UOS_VER_MAJOR_OFFSET);
+	guc->fw_minor_found = *(u16 *)(css_header + UOS_VER_MINOR_OFFSET);
+
+	if (guc->fw_major_found != guc->fw_major_wanted ||
+	    guc->fw_minor_found < guc->fw_minor_wanted) {
+		DRM_ERROR("GuC firmware version %d.%d, required %d.%d\n",
+			guc->fw_major_found, guc->fw_minor_found,
+			guc->fw_major_wanted, guc->fw_minor_wanted);
+		return false;
+	}
+
+	DRM_DEBUG_DRIVER("firmware version %d.%d OK (minimum %d.%d)\n",
+			guc->fw_major_found, guc->fw_minor_found,
+			guc->fw_major_wanted, guc->fw_minor_wanted);
+
+	/* Override default GEM object allocation-and-save here, if needed */
+	return true;
+}
+
+/**
+ * intel_guc_ucode_init() - initiate a firmware loading request
+ *
+ * Called early during driver load, before GEM is initialised.
+ * Driver is single threaded, so no mutex is required.
+ */
+void intel_guc_ucode_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_guc *guc = &dev_priv->guc;
+	struct intel_uc_fw *guc_fw = &guc->guc_fw;
+	const char *path;
+
+	if (!HAS_GUC_SCHED(dev))
+		i915.enable_guc_submission = false;
+
+	if (!HAS_GUC_UCODE(dev)) {
+		path = NULL;
+	} else if (IS_SKYLAKE(dev)) {
+		path = I915_SKL_GUC_UCODE;
+		guc->fw_major_wanted = 3;
+		guc->fw_minor_wanted = 0;
+	} else {
+		i915.enable_guc_submission = false;
+		path = "";	/* unknown device */
+	}
+
+	intel_uc_fw_init(dev, guc_fw, "GuC", path);
+}
+
+/**
+ * intel_guc_ucode_load() - load GuC uCode into the device
+ *
+ * Called from gem_init_hw() during driver loading and also after a GPU reset.
+ * Checks that the firmware fetching process has succeeded, and if so transfers
+ * the loaded image to the hardware.
+ *
+ * However, there are a few checks to do first. The very first call should have
+ * (wait == FALSE), but the fetch_state will still be PENDING as the firmware may
+ * not be available that early. Therefore, on this first call, we just return.
+ *
+ * The second call should come from the first open of the device (wait == TRUE).
+ * This is a good time to load the firmware into the device, as by this point it
+ * must be available.
+ *
+ * Any subsequent calls are expected to have wait == FALSE, and indicate that the
+ * hardware has been reset and so the firmware should be reloaded.
+ */
+int intel_guc_ucode_load(struct drm_device *dev, bool wait)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_uc_fw *guc_fw = &dev_priv->guc.guc_fw;
+	int err;
+
+	DRM_DEBUG_DRIVER("wait %d, fetch %s, load %s\n",
+		wait,
+		intel_uc_fw_status_repr(guc_fw->uc_fw_fetch_status),
+		intel_uc_fw_status_repr(guc_fw->uc_fw_load_status));
+
+	if (guc_fw->uc_fw_fetch_status == INTEL_UC_FIRMWARE_PENDING && !wait)
+		return -EAGAIN;
+
+	if (guc_fw->uc_fw_fetch_status == INTEL_UC_FIRMWARE_NONE)
+		return 0;
+
+	if (guc_fw->uc_fw_fetch_status == INTEL_UC_FIRMWARE_SUCCESS &&
+	    guc_fw->uc_fw_load_status == INTEL_UC_FIRMWARE_FAIL)
+		return -ENOEXEC;
+
+	guc_fw->uc_fw_load_status = INTEL_UC_FIRMWARE_PENDING;
+	err = intel_uc_fw_check(guc_fw, guc_ucode_check);
+	if (err)
+		goto fail;
+
+	err = guc_ucode_xfer(dev_priv);
+	if (err)
+		goto fail;
+
+	guc_fw->uc_fw_load_status = INTEL_UC_FIRMWARE_SUCCESS;
+
+	DRM_DEBUG_DRIVER("wait %d, fetch %s, load %s\n",
+		wait,
+		intel_uc_fw_status_repr(guc_fw->uc_fw_fetch_status),
+		intel_uc_fw_status_repr(guc_fw->uc_fw_load_status));
+
+	return 0;
+
+fail:
+	if (guc_fw->uc_fw_load_status == INTEL_UC_FIRMWARE_PENDING)
+		guc_fw->uc_fw_load_status = INTEL_UC_FIRMWARE_FAIL;
+
+	DRM_ERROR("Failed to initialize GuC, error %d\n", err);
+
+	return err;
+}
+
+/**
+ * intel_guc_ucode_fini() - clean up all allocated resources
+ */
+void intel_guc_ucode_fini(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_uc_fw *guc_fw = &dev_priv->guc.guc_fw;
+
+	intel_uc_fw_fini(guc_fw);
+}
-- 
1.7.9.5



More information about the Intel-gfx mailing list