[Intel-gfx] [PATCH] drm/i915: Update rps frequencies for BXT

[Bob Paauwe]

Broxton is using a different register and different bit ordering
for rps status capabilities.

Also GT perf freqency register is different for Broxton so update
that.

Signed-off-by: Bob Paauwe <bob.j.paauwe at intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 21 ++++++++++++++++-----
 drivers/gpu/drm/i915/i915_reg.h     |  2 ++
 drivers/gpu/drm/i915/intel_pm.c     | 16 ++++++++++++----
 3 files changed, 30 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index f3b8062..8a2a456a 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1132,9 +1132,9 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
 			   (rgvstat & MEMSTAT_PSTATE_MASK) >> MEMSTAT_PSTATE_SHIFT);
 	} else if (IS_GEN6(dev) || (IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) ||
 		   IS_BROADWELL(dev) || IS_GEN9(dev)) {
-		u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
-		u32 rp_state_limits = I915_READ(GEN6_RP_STATE_LIMITS);
-		u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+		u32 rp_state_limits;
+		u32 gt_perf_status;
+		u32 rp_state_cap;
 		u32 rpmodectl, rpinclimit, rpdeclimit;
 		u32 rpstat, cagf, reqf;
 		u32 rpupei, rpcurup, rpprevup;
@@ -1142,6 +1142,15 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
 		u32 pm_ier, pm_imr, pm_isr, pm_iir, pm_mask;
 		int max_freq;
 
+		rp_state_limits = I915_READ(GEN6_RP_STATE_LIMITS);
+		if (IS_BROXTON(dev)) {
+			rp_state_cap = I915_READ(BXT_RP_STATE_CAP);
+			gt_perf_status = I915_READ(BXT_GT_PERF_STATUS);
+		} else {
+			rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+			gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
+		}
+
 		/* RPSTAT1 is in the GT power well */
 		ret = mutex_lock_interruptible(&dev->struct_mutex);
 		if (ret)
@@ -1229,7 +1238,8 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
 		seq_printf(m, "Down threshold: %d%%\n",
 			   dev_priv->rps.down_threshold);
 
-		max_freq = (rp_state_cap & 0xff0000) >> 16;
+		max_freq = (IS_BROXTON(dev) ? rp_state_cap >> 0 :
+			    rp_state_cap >> 16) & 0xff;
 		max_freq *= (IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1);
 		seq_printf(m, "Lowest (RPN) frequency: %dMHz\n",
 			   intel_gpu_freq(dev_priv, max_freq));
@@ -1239,7 +1249,8 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
 		seq_printf(m, "Nominal (RP1) frequency: %dMHz\n",
 			   intel_gpu_freq(dev_priv, max_freq));
 
-		max_freq = rp_state_cap & 0xff;
+		max_freq = (IS_BROXTON(dev) ? rp_state_cap >> 16 :
+			    rp_state_cap >> 0) & 0xff;
 		max_freq *= (IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1);
 		seq_printf(m, "Max non-overclocked (RP0) frequency: %dMHz\n",
 			   intel_gpu_freq(dev_priv, max_freq));
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index fa9ccb87..17b5ca2 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2734,8 +2734,10 @@ enum skl_disp_power_wells {
 #define GEN6_GT_THREAD_STATUS_CORE_MASK 0x7
 
 #define GEN6_GT_PERF_STATUS	(MCHBAR_MIRROR_BASE_SNB + 0x5948)
+#define BXT_GT_PERF_STATUS      (MCHBAR_MIRROR_BASE_SNB + 0x7070)
 #define GEN6_RP_STATE_LIMITS	(MCHBAR_MIRROR_BASE_SNB + 0x5994)
 #define GEN6_RP_STATE_CAP	(MCHBAR_MIRROR_BASE_SNB + 0x5998)
+#define BXT_RP_STATE_CAP        0x138170
 
 #define INTERVAL_1_28_US(us)	(((us) * 100) >> 7)
 #define INTERVAL_1_33_US(us)	(((us) * 3)   >> 2)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 32ff034..213da42 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4288,13 +4288,21 @@ static void gen6_init_rps_frequencies(struct drm_device *dev)
 	u32 ddcc_status = 0;
 	int ret;
 
-	rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
 	/* All of these values are in units of 50MHz */
 	dev_priv->rps.cur_freq		= 0;
 	/* static values from HW: RP0 > RP1 > RPn (min_freq) */
-	dev_priv->rps.rp0_freq		= (rp_state_cap >>  0) & 0xff;
-	dev_priv->rps.rp1_freq		= (rp_state_cap >>  8) & 0xff;
-	dev_priv->rps.min_freq		= (rp_state_cap >> 16) & 0xff;
+	if (IS_BROXTON(dev)) {
+		rp_state_cap = I915_READ(BXT_RP_STATE_CAP);
+		dev_priv->rps.rp0_freq = (rp_state_cap >> 16) & 0xff;
+		dev_priv->rps.rp1_freq = (rp_state_cap >>  8) & 0xff;
+		dev_priv->rps.min_freq = (rp_state_cap >>  0) & 0xff;
+	} else {
+		rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+		dev_priv->rps.rp0_freq = (rp_state_cap >>  0) & 0xff;
+		dev_priv->rps.rp1_freq = (rp_state_cap >>  8) & 0xff;
+		dev_priv->rps.min_freq = (rp_state_cap >> 16) & 0xff;
+	}
+
 	if (IS_SKYLAKE(dev)) {
 		/* Store the frequency values in 16.66 MHZ units, which is
 		   the natural hardware unit for SKL */
-- 
2.1.0