[Intel-gfx] [PATCH] drm/i915: Fix IPS related flicker
Rodrigo Vivi
rodrigo.vivi at intel.com
Fri Jun 26 13:55:54 PDT 2015
We cannot let IPS enabled with no plane on the pipe:
BSpec: "IPS cannot be enabled until after at least one plane has
been enabled for at least one vertical blank." and "IPS must be
disabled while there is still at least one plane enabled on the
same pipe as IPS." This restriction apply to HSW and BDW.
However a shortcut path on update primary plane function
to make primary plane invisible by setting DSPCTRL to 0
was leting IPS enabled while there was no
other plane enabled on the pipe causing flickerings that we were
believing that it was caused by that other restriction where
ips cannot be used when pixel rate is greater than 95% of cdclok.
v2: Don't mess with Atomic path as pointed out by Ville.
v3: Rebase after a long time and atomic path changes.
Accept Ville suggestion of not check !fb
v4: Re-factore on dinq
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=85583
Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
Cc: Jani Nikula <jani.nikula at intel.com>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Tested-by: Kenneth Graunke <kenneth at whitecape.org>
---
drivers/gpu/drm/i915/intel_display.c | 16 +++++++++++++++-
drivers/gpu/drm/i915/intel_drv.h | 1 +
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 01eaab8..f87704a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4766,6 +4766,9 @@ static void intel_pre_plane_update(struct intel_crtc *crtc)
mutex_unlock(&dev->struct_mutex);
}
+ if (intel_crtc->atomic.disable_ips)
+ hsw_disable_ips(intel_crtc);
+
if (atomic->pre_disable_primary)
intel_pre_disable_primary(&crtc->base);
}
@@ -11616,8 +11619,19 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
intel_crtc->atomic.pre_disable_primary = turn_off;
intel_crtc->atomic.post_enable_primary = turn_on;
- if (turn_off)
+ if (turn_off) {
+ /*
+ * FIXME: Actually if we will still have any other
+ * plane enabled on the pipe we could let IPS enabled
+ * still, but for now lets consider that when we make
+ * primary invisible by setting DSPCNTR to 0 on
+ * update_primary_plane function IPS needs to be
+ * disable.
+ */
+ intel_crtc->atomic.disable_ips = true;
+
intel_crtc->atomic.disable_fbc = true;
+ }
/*
* FBC does not work on some platforms for rotated
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index e016d72..33cff9d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -498,6 +498,7 @@ struct intel_crtc_atomic_commit {
/* Sleepable operations to perform before commit */
bool wait_for_flips;
bool disable_fbc;
+ bool disable_ips;
bool pre_disable_primary;
bool update_wm;
unsigned disabled_planes;
--
2.1.0
More information about the Intel-gfx
mailing list