[Intel-gfx] [PATCH 3/5] drm/i915/skl: Support secondary (rotated) frame buffer mapping
Daniel Vetter
daniel at ffwll.ch
Mon Mar 2 10:21:58 PST 2015
On Mon, Mar 02, 2015 at 02:43:50PM +0000, Tvrtko Ursulin wrote:
> From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
>
> 90/270 rotated scanout needs a rotated GTT view of the framebuffer.
>
> This is put in a separate VMA with a dedicated ggtt_view and wired suchs that
> it is created when a framebuffer is pinned to a 90/270 rotated plane.
>
> Rotation is only possible with Yb/Yf buffers and error is propagated to
> user space in case of a mismatch.
>
> Special rotated page view is constructed at the VMA creation time by
> borrowing the DMA addresses from obj->pages.
>
> v2:
> * Do not bother with pages for rotated sg list, just populate the DMA
> addresses. (Daniel Vetter)
> * Checkpatch cleanup.
>
> v3:
> * Rebased on top of new plane handling (create rotated mapping when
> setting the rotation property).
> * Unpin rotated VMA on unpinning from display plane.
> * Simplify rotation check using bitwise AND. (Chris Wilson)
>
> v4:
> * Fix unpinning of optional rotated mapping so it is really considered
> to be optional.
>
> v5:
> * Rebased for fb modifier changes.
> * Rebased for atomic commit.
> * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter)
>
> For: VIZ-4726
> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
> Reviewed-by: Michel Thierry <michel.thierry at intel.com> (v4)
Bunch of nitpicks below. Also I think it'd be good to split this patch
into the rote refactoring work to add view parameters all over the place
and the actual implementation.
Cheers, Daniel
> ---
> drivers/gpu/drm/i915/i915_drv.h | 33 +++++-
> drivers/gpu/drm/i915/i915_gem.c | 27 +++--
> drivers/gpu/drm/i915/i915_gem_gtt.c | 14 ++-
> drivers/gpu/drm/i915/i915_gem_gtt.h | 12 +++
> drivers/gpu/drm/i915/intel_display.c | 204 +++++++++++++++++++++++++++++++----
> drivers/gpu/drm/i915/intel_drv.h | 4 +
> drivers/gpu/drm/i915/intel_fbdev.c | 2 +-
> drivers/gpu/drm/i915/intel_overlay.c | 3 +-
> 8 files changed, 263 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index e07a1cb..79d3f2c 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -2743,8 +2743,10 @@ i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write);
> int __must_check
> i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
> u32 alignment,
> - struct intel_engine_cs *pipelined);
> -void i915_gem_object_unpin_from_display_plane(struct drm_i915_gem_object *obj);
> + struct intel_engine_cs *pipelined,
> + const struct i915_ggtt_view *view);
> +void i915_gem_object_unpin_from_display_plane(struct drm_i915_gem_object *obj,
> + const struct i915_ggtt_view *view);
> int i915_gem_object_attach_phys(struct drm_i915_gem_object *obj,
> int align);
> int i915_gem_open(struct drm_device *dev, struct drm_file *file);
> @@ -2813,7 +2815,13 @@ i915_gem_obj_lookup_or_create_vma(struct drm_i915_gem_object *obj,
> &i915_ggtt_view_normal);
> }
>
> -struct i915_vma *i915_gem_obj_to_ggtt(struct drm_i915_gem_object *obj);
> +struct i915_vma *i915_gem_obj_to_ggtt_view(struct drm_i915_gem_object *obj,
> + enum i915_ggtt_view_type view);
> +static inline
> +struct i915_vma *i915_gem_obj_to_ggtt(struct drm_i915_gem_object *obj)
> +{
> + return i915_gem_obj_to_ggtt_view(obj, I915_GGTT_VIEW_NORMAL);
> +}
> static inline bool i915_gem_obj_is_pinned(struct drm_i915_gem_object *obj) {
> struct i915_vma *vma;
> list_for_each_entry(vma, &obj->vma_list, vma_link)
> @@ -2867,13 +2875,30 @@ i915_gem_obj_ggtt_pin(struct drm_i915_gem_object *obj,
> alignment, flags | PIN_GLOBAL);
> }
>
> +static inline int __must_check
> +i915_gem_obj_ggtt_pin_view(struct drm_i915_gem_object *obj,
> + uint32_t alignment,
> + unsigned flags,
> + const struct i915_ggtt_view *ggtt_view)
> +{
> + return i915_gem_object_pin_view(obj, i915_obj_to_ggtt(obj),
> + alignment, flags | PIN_GLOBAL,
> + ggtt_view);
> +}
> +
> static inline int
> i915_gem_object_ggtt_unbind(struct drm_i915_gem_object *obj)
> {
> return i915_vma_unbind(i915_gem_obj_to_ggtt(obj));
> }
>
> -void i915_gem_object_ggtt_unpin(struct drm_i915_gem_object *obj);
> +void i915_gem_object_ggtt_unpin_view(struct drm_i915_gem_object *obj,
> + enum i915_ggtt_view_type view);
> +static inline void
> +i915_gem_object_ggtt_unpin(struct drm_i915_gem_object *obj)
> +{
> + i915_gem_object_ggtt_unpin_view(obj, I915_GGTT_VIEW_NORMAL);
> +}
>
> /* i915_gem_context.c */
> int __must_check i915_gem_context_init(struct drm_device *dev);
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index 0107c2a..04c0cb1 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -3938,7 +3938,8 @@ static bool is_pin_display(struct drm_i915_gem_object *obj)
> int
> i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
> u32 alignment,
> - struct intel_engine_cs *pipelined)
> + struct intel_engine_cs *pipelined,
> + const struct i915_ggtt_view *view)
> {
> u32 old_read_domains, old_write_domain;
> bool was_pin_display;
> @@ -3974,7 +3975,9 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
> * (e.g. libkms for the bootup splash), we have to ensure that we
> * always use map_and_fenceable for all scanout buffers.
> */
> - ret = i915_gem_obj_ggtt_pin(obj, alignment, PIN_MAPPABLE);
> + ret = i915_gem_obj_ggtt_pin_view(obj, alignment,
> + view->type == I915_GGTT_VIEW_NORMAL ?
> + PIN_MAPPABLE : 0, view);
> if (ret)
> goto err_unpin_display;
>
> @@ -4002,9 +4005,11 @@ err_unpin_display:
> }
>
> void
> -i915_gem_object_unpin_from_display_plane(struct drm_i915_gem_object *obj)
> +i915_gem_object_unpin_from_display_plane(struct drm_i915_gem_object *obj,
> + const struct i915_ggtt_view *view)
> {
> - i915_gem_object_ggtt_unpin(obj);
> + i915_gem_object_ggtt_unpin_view(obj, view->type);
> +
> obj->pin_display = is_pin_display(obj);
> }
>
> @@ -4241,15 +4246,16 @@ i915_gem_object_pin_view(struct drm_i915_gem_object *obj,
> }
>
> void
> -i915_gem_object_ggtt_unpin(struct drm_i915_gem_object *obj)
> +i915_gem_object_ggtt_unpin_view(struct drm_i915_gem_object *obj,
> + enum i915_ggtt_view_type view)
> {
> - struct i915_vma *vma = i915_gem_obj_to_ggtt(obj);
> + struct i915_vma *vma = i915_gem_obj_to_ggtt_view(obj, view);
>
> BUG_ON(!vma);
> BUG_ON(vma->pin_count == 0);
> - BUG_ON(!i915_gem_obj_ggtt_bound(obj));
> + BUG_ON(!i915_gem_obj_bound_view(obj, i915_obj_to_ggtt(obj), view));
>
> - if (--vma->pin_count == 0)
> + if (--vma->pin_count == 0 && view == I915_GGTT_VIEW_NORMAL)
> obj->pin_mappable = false;
> }
>
> @@ -5306,14 +5312,15 @@ i915_gem_shrinker_oom(struct notifier_block *nb, unsigned long event, void *ptr)
> return NOTIFY_DONE;
> }
>
> -struct i915_vma *i915_gem_obj_to_ggtt(struct drm_i915_gem_object *obj)
> +struct i915_vma *i915_gem_obj_to_ggtt_view(struct drm_i915_gem_object *obj,
> + enum i915_ggtt_view_type view)
> {
> struct i915_address_space *ggtt = i915_obj_to_ggtt(obj);
> struct i915_vma *vma;
>
> list_for_each_entry(vma, &obj->vma_list, vma_link)
> if (vma->vm == ggtt &&
> - vma->ggtt_view.type == I915_GGTT_VIEW_NORMAL)
> + vma->ggtt_view.type == view)
> return vma;
>
> return NULL;
> diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
> index bd95776..9336142 100644
> --- a/drivers/gpu/drm/i915/i915_gem_gtt.c
> +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
> @@ -2375,11 +2375,16 @@ i915_gem_obj_lookup_or_create_vma_view(struct drm_i915_gem_object *obj,
> static inline
> int i915_get_vma_pages(struct i915_vma *vma)
> {
> + int ret = 0;
> +
> if (vma->ggtt_view.pages)
> return 0;
>
> if (vma->ggtt_view.type == I915_GGTT_VIEW_NORMAL)
> vma->ggtt_view.pages = vma->obj->pages;
> + else if (vma->ggtt_view.type == I915_GGTT_VIEW_ROTATED)
> + vma->ggtt_view.pages =
> + intel_rotate_fb_obj_pages(&vma->ggtt_view, vma->obj);
There's a bit a layering confusion going on, ggtt view code should be here
in the gem code with an appropriate prefix. Just moving the code is all
that's imo needed.
> else
> WARN_ONCE(1, "GGTT view %u not implemented!\n",
> vma->ggtt_view.type);
> @@ -2387,10 +2392,15 @@ int i915_get_vma_pages(struct i915_vma *vma)
> if (!vma->ggtt_view.pages) {
> DRM_ERROR("Failed to get pages for VMA view type %u!\n",
> vma->ggtt_view.type);
> - return -EINVAL;
> + ret = -EINVAL;
> + } else if (IS_ERR(vma->ggtt_view.pages)) {
> + ret = PTR_ERR(vma->ggtt_view.pages);
> + vma->ggtt_view.pages = NULL;
> + DRM_ERROR("Failed to get pages for VMA view type %u (%d)!\n",
> + vma->ggtt_view.type, ret);
> }
>
> - return 0;
> + return ret;
> }
>
> /**
> diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h
> index c9e93f5..56a2356 100644
> --- a/drivers/gpu/drm/i915/i915_gem_gtt.h
> +++ b/drivers/gpu/drm/i915/i915_gem_gtt.h
> @@ -111,12 +111,24 @@ typedef gen8_gtt_pte_t gen8_ppgtt_pde_t;
>
> enum i915_ggtt_view_type {
> I915_GGTT_VIEW_NORMAL = 0,
> + I915_GGTT_VIEW_ROTATED
> +};
> +
> +struct intel_rotation_info {
> + unsigned int pixel_size;
> + unsigned int height;
> + unsigned int pitch;
> + uint64_t fb_modifier;
> };
>
> struct i915_ggtt_view {
> enum i915_ggtt_view_type type;
>
> struct sg_table *pages;
> +
> + union {
> + struct intel_rotation_info rotation_info;
> + };
> };
>
> extern const struct i915_ggtt_view i915_ggtt_view_normal;
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 7a5d0a7..cb4dae8 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2244,18 +2244,151 @@ intel_fb_align_height(struct drm_device *dev, int height, uint32_t pixel_format,
> fb_format_modifier));
> }
>
> -int
> -intel_pin_and_fence_fb_obj(struct drm_plane *plane,
> - struct drm_framebuffer *fb,
> - struct intel_engine_cs *pipelined)
> +static
> +void rotate_pages(dma_addr_t *in, unsigned int width, unsigned int height,
> + struct sg_table *st)
> +{
> + unsigned int column, row;
> + unsigned int src_idx;
> + struct scatterlist *sg = st->sgl;
> +
> + st->nents = 0;
> +
> + for (column = 0; column < width; column++) {
> + src_idx = width * (height - 1) + column;
> + for (row = 0; row < height; row++) {
> + st->nents++;
> + /* We don't need the pages, but need to initialize
> + * the entries so the sg list can be happily traversed.
> + * The only thing we need are DMA addresses.
> + */
> + sg_set_page(sg, NULL, PAGE_SIZE, 0);
> + sg_dma_address(sg) = in[src_idx];
> + sg_dma_len(sg) = PAGE_SIZE;
> + sg = sg_next(sg);
> + src_idx -= width;
> + }
> + }
> +}
> +
> +struct sg_table *intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,
> + struct drm_i915_gem_object *obj)
> {
> - struct drm_device *dev = fb->dev;
> + struct drm_device *dev = obj->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> - u32 alignment;
> - int ret;
> + struct i915_address_space *ggtt = &dev_priv->gtt.base;
> + struct intel_rotation_info *rot_info = &ggtt_view->rotation_info;
> + unsigned long size, pages, rot_pages;
> + struct sg_page_iter sg_iter;
> + unsigned long i;
> + dma_addr_t *page_addr_list;
> + struct sg_table *st;
> + unsigned int tile_width, tile_height;
> + unsigned int width_pages, height_pages;
> + int ret = ENOMEM;
>
> - WARN_ON(!mutex_is_locked(&dev->struct_mutex));
> + pages = i915_gem_obj_size(obj, ggtt) / PAGE_SIZE;
> +
> + /* Calculate tiling geometry. */
> + tile_height = intel_tile_height(dev, rot_info->pixel_size * 8,
> + rot_info->fb_modifier);
> + tile_width = PAGE_SIZE / rot_info->pixel_size / tile_height;
> + width_pages = DIV_ROUND_UP(rot_info->pitch / rot_info->pixel_size,
> + tile_width);
> + height_pages = DIV_ROUND_UP(rot_info->height, tile_height);
> + rot_pages = width_pages * height_pages;
> + size = rot_pages * PAGE_SIZE;
> +
> + /* Allocate a temporary list of source pages for random access. */
> + page_addr_list = drm_malloc_ab(pages, sizeof(dma_addr_t));
> + if (!page_addr_list)
> + return ERR_PTR(ret);
> +
> + /* Allocate target SG list. */
> + st = kmalloc(sizeof(*st), GFP_KERNEL);
> + if (!st)
> + goto err_st_alloc;
> +
> + ret = sg_alloc_table(st, rot_pages, GFP_KERNEL);
> + if (ret)
> + goto err_sg_alloc;
> +
> + /* Populate source page list from the object. */
> + i = 0;
> + for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, 0) {
> + page_addr_list[i] = sg_page_iter_dma_address(&sg_iter);
> + i++;
> + }
> +
> + /* Rotate the pages. */
> + rotate_pages(page_addr_list, width_pages, height_pages, st);
> +
> + DRM_DEBUG_KMS(
> + "Created rotated page mapping for object size %lu (pitch=%u, height=%u, pixel_size=%u, %ux%u tiles, %lu pages).\n",
> + size, rot_info->pitch, rot_info->height,
> + rot_info->pixel_size, width_pages, height_pages,
> + rot_pages);
> +
> + drm_free_large(page_addr_list);
> +
> + return st;
> +
> +err_sg_alloc:
> + kfree(st);
> +err_st_alloc:
> + drm_free_large(page_addr_list);
> +
> + DRM_DEBUG_KMS(
> + "Failed to create rotated mapping for object size %lu! (%d) (pitch=%u, height=%u, pixel_size=%u, %ux%u tiles, %lu pages)\n",
> + size, ret, rot_info->pitch, rot_info->height,
> + rot_info->pixel_size, width_pages, height_pages,
> + rot_pages);
> + return ERR_PTR(ret);
> +}
> +
> +static
> +const struct i915_ggtt_view i915_rotated_ggtt_view_template = {
> + .type = I915_GGTT_VIEW_ROTATED,
> +};
Not really needed, you can just use a struct assignment instaed of the
memcpy below, i.e.
*view = {.type = I915_GGTT_VIEW_ROTATED};
gcc then clears everyhing else.
> +
> +static
> +int intel_fb_ggtt_view(struct drm_plane_state *plane_state,
> + struct drm_framebuffer *fb,
> + struct i915_ggtt_view *view)
I think intel_fill_fb_ggtt_view would be a clearer name for what this
does. Also generally we put the struct a function operations on first (to
fake OOP principles) and group later parameters by topic and then object
first and flags/data later. So here I'd go with (view, fb, plane_state).
> +{
> + struct intel_rotation_info *info = &view->rotation_info;
> +
> + memcpy(view, &i915_ggtt_view_normal, sizeof(*view));
> +
> + if (!plane_state)
> + return 0;
> +
> + if (plane_state->rotation &
> + (BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270))) == 0)
> + return 0;
> +
> + memcpy(view, &i915_rotated_ggtt_view_template, sizeof(*view));
> +
> + info->height = fb->height;
> + info->pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
> + info->pitch = fb->pitches[0];
> + info->fb_modifier = fb->modifier[0];
> +
> + if (!(info->fb_modifier == I915_FORMAT_MOD_Y_TILED ||
> + info->fb_modifier == I915_FORMAT_MOD_Yf_TILED)) {
> + DRM_DEBUG_KMS(
> + "Y or Yf tiling is needed for 90/270 rotation!\n");
> + return -EINVAL;
> + }
> +
> + return 1;
> +}
> +
> +static
> +u32 intel_display_obj_alignment(struct drm_device *dev,
> + struct drm_framebuffer *fb)
> +{
> + int alignment;
>
> switch (fb->modifier[0]) {
> case DRM_FORMAT_MOD_NONE:
> @@ -2296,6 +2429,30 @@ intel_pin_and_fence_fb_obj(struct drm_plane *plane,
> if (need_vtd_wa(dev) && alignment < 256 * 1024)
> alignment = 256 * 1024;
>
> + return alignment;
> +}
> +
> +int
> +intel_pin_and_fence_fb_obj(struct drm_plane *plane,
> + struct drm_framebuffer *fb,
> + struct drm_plane_state *plane_state,
> + struct intel_engine_cs *pipelined)
> +{
> + struct drm_device *dev = fb->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> + struct i915_ggtt_view view;
> + u32 alignment;
> + int ret;
> +
> + WARN_ON(!mutex_is_locked(&dev->struct_mutex));
> +
> + alignment = intel_display_obj_alignment(dev, fb);
> +
> + ret = intel_fb_ggtt_view(plane_state, fb, &view);
> + if (ret < 0)
> + return ret;
> +
> /*
> * Global gtt pte registers are special registers which actually forward
> * writes to a chunk of system memory. Which means that there is no risk
> @@ -2306,7 +2463,8 @@ intel_pin_and_fence_fb_obj(struct drm_plane *plane,
> intel_runtime_pm_get(dev_priv);
>
> dev_priv->mm.interruptible = false;
> - ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
> + ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined,
> + &view);
> if (ret)
> goto err_interruptible;
>
> @@ -2326,19 +2484,27 @@ intel_pin_and_fence_fb_obj(struct drm_plane *plane,
> return 0;
>
> err_unpin:
> - i915_gem_object_unpin_from_display_plane(obj);
> + i915_gem_object_unpin_from_display_plane(obj, &view);
> err_interruptible:
> dev_priv->mm.interruptible = true;
> intel_runtime_pm_put(dev_priv);
> return ret;
> }
>
> -static void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
> +static void intel_unpin_fb_obj(struct drm_framebuffer *fb,
> + struct drm_plane_state *plane_state)
> {
> + struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> + struct i915_ggtt_view view;
> + int ret;
> +
> WARN_ON(!mutex_is_locked(&obj->base.dev->struct_mutex));
>
> + ret = intel_fb_ggtt_view(plane_state, fb, &view);
> + WARN_ONCE(ret < 0, "Invalid fb format and rotation combination!");
> +
> i915_gem_object_unpin_fence(obj);
> - i915_gem_object_unpin_from_display_plane(obj);
> + i915_gem_object_unpin_from_display_plane(obj, &view);
> }
>
> /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
> @@ -9223,7 +9389,7 @@ static void intel_unpin_work_fn(struct work_struct *__work)
> enum pipe pipe = to_intel_crtc(work->crtc)->pipe;
>
> mutex_lock(&dev->struct_mutex);
> - intel_unpin_fb_obj(intel_fb_obj(work->old_fb));
> + intel_unpin_fb_obj(work->old_fb, work->crtc->primary->state);
> drm_gem_object_unreference(&work->pending_flip_obj->base);
> drm_framebuffer_unreference(work->old_fb);
>
> @@ -9931,7 +10097,8 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
> ring = &dev_priv->ring[RCS];
> }
>
> - ret = intel_pin_and_fence_fb_obj(crtc->primary, fb, ring);
> + ret = intel_pin_and_fence_fb_obj(crtc->primary, fb,
> + crtc->primary->state, ring);
> if (ret)
> goto cleanup_pending;
>
> @@ -9971,7 +10138,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
> return 0;
>
> cleanup_unpin:
> - intel_unpin_fb_obj(obj);
> + intel_unpin_fb_obj(fb, crtc->primary->state);
> cleanup_pending:
> atomic_dec(&intel_crtc->unpin_work_count);
> crtc->primary->fb = old_fb;
> @@ -11933,7 +12100,7 @@ intel_prepare_plane_fb(struct drm_plane *plane,
> if (ret)
> DRM_DEBUG_KMS("failed to attach phys object\n");
> } else {
> - ret = intel_pin_and_fence_fb_obj(plane, fb, NULL);
> + ret = intel_pin_and_fence_fb_obj(plane, fb, new_state, NULL);
> }
>
> if (ret == 0)
> @@ -11965,7 +12132,7 @@ intel_cleanup_plane_fb(struct drm_plane *plane,
> if (plane->type != DRM_PLANE_TYPE_CURSOR ||
> !INTEL_INFO(dev)->cursor_needs_physical) {
> mutex_lock(&dev->struct_mutex);
> - intel_unpin_fb_obj(obj);
> + intel_unpin_fb_obj(fb, old_state);
> mutex_unlock(&dev->struct_mutex);
> }
> }
> @@ -13862,6 +14029,7 @@ void intel_modeset_gem_init(struct drm_device *dev)
>
> if (intel_pin_and_fence_fb_obj(c->primary,
> c->primary->fb,
> + c->primary->state,
> NULL)) {
> DRM_ERROR("failed to pin boot fb on pipe %d\n",
> to_intel_crtc(c)->pipe);
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index c466d43..9c2145d 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -955,6 +955,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
> struct intel_load_detect_pipe *old);
> int intel_pin_and_fence_fb_obj(struct drm_plane *plane,
> struct drm_framebuffer *fb,
> + struct drm_plane_state *plane_state,
> struct intel_engine_cs *pipelined);
> struct drm_framebuffer *
> __intel_framebuffer_create(struct drm_device *dev,
> @@ -979,6 +980,9 @@ int intel_plane_atomic_set_property(struct drm_plane *plane,
> struct drm_property *property,
> uint64_t val);
>
> +struct sg_table *intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,
> + struct drm_i915_gem_object *obj);
> +
> /* shared dpll functions */
> struct intel_shared_dpll *intel_crtc_to_shared_dpll(struct intel_crtc *crtc);
> void assert_shared_dpll(struct drm_i915_private *dev_priv,
> diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
> index 234a699..d8204ae 100644
> --- a/drivers/gpu/drm/i915/intel_fbdev.c
> +++ b/drivers/gpu/drm/i915/intel_fbdev.c
> @@ -126,7 +126,7 @@ static int intelfb_alloc(struct drm_fb_helper *helper,
> }
>
> /* Flush everything out, we'll be doing GTT only from now on */
> - ret = intel_pin_and_fence_fb_obj(NULL, fb, NULL);
> + ret = intel_pin_and_fence_fb_obj(NULL, fb, NULL, NULL);
> if (ret) {
> DRM_ERROR("failed to pin obj: %d\n", ret);
> goto out_fb;
> diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
> index 823d1d9..dd92122 100644
> --- a/drivers/gpu/drm/i915/intel_overlay.c
> +++ b/drivers/gpu/drm/i915/intel_overlay.c
> @@ -720,7 +720,8 @@ static int intel_overlay_do_put_image(struct intel_overlay *overlay,
> if (ret != 0)
> return ret;
>
> - ret = i915_gem_object_pin_to_display_plane(new_bo, 0, NULL);
> + ret = i915_gem_object_pin_to_display_plane(new_bo, 0, NULL,
> + &i915_ggtt_view_normal);
> if (ret != 0)
> return ret;
>
> --
> 2.3.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the Intel-gfx
mailing list