[Intel-gfx] [PATCH] drm/i915: Add debugfs entry for DRRS
Ramalingam C
ramalingam.c at intel.com
Tue Mar 3 04:20:00 PST 2015
On Monday 23 February 2015 11:49 PM, Rodrigo Vivi wrote:
> On Mon, Feb 23, 2015 at 4:05 AM, Ramalingam C <ramalingam.c at intel.com> wrote:
>> From: Vandana Kannan <vandana.kannan at intel.com>
>>
>> Adding a debugfs entry to determine if DRRS is supported or not
>>
>> V2: [By Ram]: Following details about the active crtc will be filled
>> in seq-file of the debugfs
>> 1. Encoder output type
>> 2. DRRS Support on this CRTC
>> 3. DRRS current state
>> 4. Current Vrefresh
>> Format is as follows:
>> CRTC 1: Output: eDP, DRRS Supported: Yes (Seamless), DRRS_State: DRRS_HIGH_RR, Vrefresh: 60
>> CRTC 2: Output: HDMI, DRRS Supported : No, VBT DRRS_type: Seamless
>> CRTC 1: Output: eDP, DRRS Supported: Yes (Seamless), DRRS_State: DRRS_LOW_RR, Vrefresh: 40
>> CRTC 2: Output: HDMI, DRRS Supported : No, VBT DRRS_type: Seamless
>>
>> V3: [By Ram]: Readability is improved.
>> Another error case is covered [Daniel]
>>
>> V4: [By Ram]: Current status of the Idleness DRRS along with
>> the Front buffer bits are added to the debugfs. [Rodrigo]
>>
>> V5: [By Ram]: Rephrased to make it easy to understand.
>> And format is modified. [Rodrigo]
>>
>> Signed-off-by: Vandana Kannan <vandana.kannan at intel.com>
>> Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
>> ---
>> drivers/gpu/drm/i915/i915_debugfs.c | 113 +++++++++++++++++++++++++++++++++++
>> 1 file changed, 113 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
>> index 164fa82..e51001c 100644
>> --- a/drivers/gpu/drm/i915/i915_debugfs.c
>> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
>> @@ -2869,6 +2869,118 @@ static int i915_ddb_info(struct seq_file *m, void *unused)
>> return 0;
>> }
>>
>> +static void drrs_status_per_crtc(struct seq_file *m,
>> + struct drm_device *dev, struct intel_crtc *intel_crtc)
>> +{
>> + struct intel_encoder *intel_encoder;
>> + struct drm_i915_private *dev_priv = dev->dev_private;
>> + struct i915_drrs *drrs = &dev_priv->drrs;
>> + int vrefresh = 0;
>> + u32 work_status;
>> +
>> + for_each_encoder_on_crtc(dev, &intel_crtc->base, intel_encoder) {
>> + /* Encoder connected on this CRTC */
>> + switch (intel_encoder->type) {
>> + case INTEL_OUTPUT_EDP:
>> + seq_puts(m, "eDP:\n");
>> + break;
>> + case INTEL_OUTPUT_DSI:
>> + seq_puts(m, "DSI:\n");
>> + break;
>> + case INTEL_OUTPUT_HDMI:
>> + seq_puts(m, "HDMI:\n");
>> + break;
>> + case INTEL_OUTPUT_DISPLAYPORT:
>> + seq_puts(m, "DP:\n");
>> + break;
>> + default:
>> + seq_printf(m, "Other encoder (id=%d).\n",
>> + intel_encoder->type);
>> + return;
>> + }
>> + }
>> +
>> + if (dev_priv->vbt.drrs_type == STATIC_DRRS_SUPPORT)
>> + seq_puts(m, "\tVBT: DRRS_type: Static");
>> + else if (dev_priv->vbt.drrs_type == SEAMLESS_DRRS_SUPPORT)
>> + seq_puts(m, "\tVBT: DRRS_type: Seamless");
>> + else if (dev_priv->vbt.drrs_type == DRRS_NOT_SUPPORTED)
>> + seq_puts(m, "\tVBT: DRRS_type: None");
>> + else
>> + seq_puts(m, "\tVBT: DRRS_type: FIXME: Unrecognized Value");
>> +
>> + seq_puts(m, "\n\n");
>> +
>> + if (intel_crtc->config->has_drrs) {
>> + struct intel_panel *panel;
>> +
>> + panel = &drrs->dp->attached_connector->panel;
>> + /* DRRS Supported */
>> + seq_puts(m, "\tDRRS Supported: Yes\n");
>> + seq_printf(m, "\t\tBusy_frontbuffer_bits: 0x%X",
>> + drrs->busy_frontbuffer_bits);
>> +
>> + seq_puts(m, "\n\t\t");
>> + work_status = work_busy(&drrs->work.work);
>> + if (drrs->busy_frontbuffer_bits) {
>> + seq_puts(m, "Front buffer: Busy.\n");
>> + seq_puts(m, "\t\tIdleness DRRS: Disabled");
>> + } else {
>> + seq_puts(m, "Front buffer: Idle");
>> + seq_puts(m, "\n\t\t");
>> + if (drrs->refresh_rate_type == DRRS_HIGH_RR) {
>> + if (work_status)
> Why do you need to check work_busy here?
This is to capture the DRRS disabled state due to function
intel_edp_drrs_disable.
>
>> + seq_puts(m, "Idleness DRRS: Enabled");
>> + else
>> + seq_puts(m, "Idleness DRRS: Disabled");
>> + } else if (drrs->refresh_rate_type == DRRS_LOW_RR) {
>> + seq_puts(m, "Idleness DRRS: Enabled");
>> + }
>> + }
>> +
>> + seq_puts(m, "\n\t\t");
>> + if (drrs->refresh_rate_type == DRRS_HIGH_RR) {
>> + seq_puts(m, "DRRS_State: DRRS_HIGH_RR\n");
>> + vrefresh = panel->fixed_mode->vrefresh;
>> + } else if (drrs->refresh_rate_type == DRRS_LOW_RR) {
>> + seq_puts(m, "DRRS_State: DRRS_LOW_RR\n");
>> + vrefresh = panel->downclock_mode->vrefresh;
>> + } else {
>> + seq_printf(m, "DRRS_State: Unknown(%d)\n",
>> + drrs->refresh_rate_type);
>> + return;
>> + }
>> + seq_printf(m, "\t\tVrefresh: %d", vrefresh);
>> +
>> + } else {
>> + /* DRRS not supported. Print the VBT parameter*/
>> + seq_puts(m, "\tDRRS Supported : No");
>> + }
>> + seq_puts(m, "\n");
>> +}
>> +
>> +static int i915_drrs_status(struct seq_file *m, void *unused)
>> +{
>> + struct drm_info_node *node = m->private;
>> + struct drm_device *dev = node->minor->dev;
>> + struct intel_crtc *intel_crtc;
>> + int active_crtc_cnt = 0;
>> +
>> + for_each_intel_crtc(dev, intel_crtc) {
>> + if (intel_crtc->active) {
>> + active_crtc_cnt++;
>> + seq_printf(m, "\nCRTC %d: ", active_crtc_cnt);
>> +
>> + drrs_status_per_crtc(m, dev, intel_crtc);
>> + }
>> + }
>> +
>> + if (!active_crtc_cnt)
>> + seq_puts(m, "No active crtc found\n");
>> +
>> + return 0;
>> +}
>> +
>> struct pipe_crc_info {
>> const char *name;
>> struct drm_device *dev;
>> @@ -4483,6 +4595,7 @@ static const struct drm_info_list i915_debugfs_list[] = {
>> {"i915_dp_mst_info", i915_dp_mst_info, 0},
>> {"i915_wa_registers", i915_wa_registers, 0},
>> {"i915_ddb_info", i915_ddb_info, 0},
>> + {"i915_drrs_status", i915_drrs_status, 0},
>> };
>> #define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list)
>>
>> --
>> 1.7.9.5
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> Thanks for the changes.
> With that explained feel free to use Reviewed-by: Rodrigo Vivi
> <rodrigo.vivi at intel.com>
--
Ram
More information about the Intel-gfx
mailing list