[Intel-gfx] [PATCH 4/4] drm/i915/skl: Program PLL for edp1.4 intermediate frequencies
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Mar 4 03:25:11 PST 2015
On Sat, Feb 21, 2015 at 11:12:13AM +0530, Sonika Jindal wrote:
> v2: Making the link_clock half in switch inline with the DPLL_CTRL1_* macros
> (Ville)
>
> Signed-off-by: Sonika Jindal <sonika.jindal at intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 28 ++++++++++++++++++++++------
> 1 file changed, 22 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index cf7a0f5..62bc6c1 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1079,7 +1079,7 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector)
> }
>
> static void
> -skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_bw)
> +skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
> {
> u32 ctrl1;
>
> @@ -1088,19 +1088,35 @@ skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_bw)
> pipe_config->dpll_hw_state.cfgcr2 = 0;
>
> ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
> - switch (link_bw) {
> - case DP_LINK_BW_1_62:
> + switch (link_clock / 2) {
> + case 81000:
> ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_810,
> SKL_DPLL0);
> break;
> - case DP_LINK_BW_2_7:
> + case 135000:
> ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1350,
> SKL_DPLL0);
> break;
> - case DP_LINK_BW_5_4:
> + case 270000:
> ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2700,
> SKL_DPLL0);
> break;
> + case 162000:
> + ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1620,
> + SKL_DPLL0);
> + break;
> + /* TBD: For DP link rates 2.16 GHz and 4.32 GHz, VCO is 8640 which
> + results in CDCLK change. Need to handle the change of CDCLK by
> + disabling pipes and re-enabling them */
> + case 108000:
> + ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1080,
> + SKL_DPLL0);
> + break;
> + case 216000:
> + ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2160,
> + SKL_DPLL0);
> + break;
> +
> }
> pipe_config->dpll_hw_state.ctrl1 = ctrl1;
> }
> @@ -1395,7 +1411,7 @@ found:
> }
>
> if (IS_SKYLAKE(dev) && is_edp(intel_dp))
> - skl_edp_set_pll_config(pipe_config, intel_dp->link_bw);
> + skl_edp_set_pll_config(pipe_config, supported_rates[clock]);
> else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
> hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw);
> else
> --
> 1.7.10.4
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list