[Intel-gfx] [PATCH 2/3] drm/i915: Initialize CHV digital lock detect threshold
Vijay Purushothaman
vijay.a.purushothaman at linux.intel.com
Thu Mar 5 06:02:06 PST 2015
Initialize lock detect threshold and select coarse threshold for the
case where M2 fraction division is disabled.
v2: Split the changes into multiple smaller patches (Ville)
v3: Clear out the old bits before we modify those bits as RMW (Ville)
v4: Reset coarse threshold when M2 fraction is enabled (Ville)
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman at linux.intel.com>
Signed-off-by: Ville Syrjala <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_display.c | 9 +++++++++
2 files changed, 10 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8200e98..1a0f94e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1046,6 +1046,7 @@ enum skl_disp_power_wells {
#define _CHV_PLL_DW9_CH0 0x8024
#define _CHV_PLL_DW9_CH1 0x81A4
#define DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT 1 /* 3 bits */
+#define DPIO_CHV_INT_LOCK_THRESHOLD_MASK (7 << 1)
#define DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE 1 /* 1: coarse & 0 : fine */
#define CHV_PLL_DW9(ch) _PIPE(ch, _CHV_PLL_DW9_CH0, _CHV_PLL_DW9_CH1)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c5a8725..6c5a5a9 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6177,6 +6177,15 @@ static void chv_prepare_pll(struct intel_crtc *crtc,
dpio_val |= DPIO_CHV_FRAC_DIV_EN;
vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val);
+ /* Program digital lock detect threshold */
+ dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port));
+ dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK |
+ DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE);
+ dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT);
+ if (!bestm2_frac)
+ dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE;
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val);
+
/* Loop filter */
refclk = i9xx_get_refclk(crtc, 0);
loopfilter = 5 << DPIO_CHV_PROP_COEFF_SHIFT |
--
1.7.9.5
More information about the Intel-gfx
mailing list