[Intel-gfx] [PATCH v2 07/12] drm/i915: Read out display FIFO size on VLV/CHV

ville.syrjala at linux.intel.com ville.syrjala at linux.intel.com
Thu Mar 5 11:19:47 PST 2015


From: Ville Syrjälä <ville.syrjala at linux.intel.com>

VLV/CHV have similar DSPARB registers as older platforms, just more of
them due to more planes. Add a bit of code to read out the current FIFO
split from the registers. Will be useful later when we improve the WM
calculations.

v2: Add display_mmio_offset to DSPARB

Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h |  5 +++-
 drivers/gpu/drm/i915/intel_pm.c | 55 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index b35aaf3..3b48f4b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4026,7 +4026,7 @@ enum skl_disp_power_wells {
 #define   DPINVGTT_STATUS_MASK			0xff
 #define   DPINVGTT_STATUS_MASK_CHV		0xfff
 
-#define DSPARB			0x70030
+#define DSPARB			(dev_priv->info.display_mmio_offset + 0x70030)
 #define   DSPARB_CSTART_MASK	(0x7f << 7)
 #define   DSPARB_CSTART_SHIFT	7
 #define   DSPARB_BSTART_MASK	(0x7f)
@@ -4034,6 +4034,9 @@ enum skl_disp_power_wells {
 #define   DSPARB_BEND_SHIFT	9 /* on 855 */
 #define   DSPARB_AEND_SHIFT	0
 
+#define DSPARB2			(VLV_DISPLAY_BASE + 0x70060) /* vlv/chv */
+#define DSPARB3			(VLV_DISPLAY_BASE + 0x7006c) /* chv */
+
 /* pnv/gen4/g4x/vlv/chv */
 #define DSPFW1			(dev_priv->info.display_mmio_offset + 0x70034)
 #define   DSPFW_SR_SHIFT		23
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index f8f6cee..27ce40c 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -280,6 +280,61 @@ void intel_set_memory_cxsr(struct drm_i915_private *dev_priv, bool enable)
  */
 static const int pessimal_latency_ns = 5000;
 
+#define VLV_FIFO_START(dsparb, dsparb2, lo_shift, hi_shift) \
+	((((dsparb) >> (lo_shift)) & 0xff) | ((((dsparb2) >> (hi_shift)) & 0x1) << 8))
+
+static int vlv_get_fifo_size(struct drm_device *dev,
+			      enum pipe pipe, int plane)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int sprite0_start, sprite1_start, size;
+
+	switch (pipe) {
+		uint32_t dsparb, dsparb2, dsparb3;
+	case PIPE_A:
+		dsparb = I915_READ(DSPARB);
+		dsparb2 = I915_READ(DSPARB2);
+		sprite0_start = VLV_FIFO_START(dsparb, dsparb2, 0, 0);
+		sprite1_start = VLV_FIFO_START(dsparb, dsparb2, 8, 4);
+		break;
+	case PIPE_B:
+		dsparb = I915_READ(DSPARB);
+		dsparb2 = I915_READ(DSPARB2);
+		sprite0_start = VLV_FIFO_START(dsparb, dsparb2, 16, 8);
+		sprite1_start = VLV_FIFO_START(dsparb, dsparb2, 24, 12);
+		break;
+	case PIPE_C:
+		dsparb2 = I915_READ(DSPARB2);
+		dsparb3 = I915_READ(DSPARB3);
+		sprite0_start = VLV_FIFO_START(dsparb3, dsparb2, 0, 16);
+		sprite1_start = VLV_FIFO_START(dsparb3, dsparb2, 8, 20);
+		break;
+	default:
+		return 0;
+	}
+
+	switch (plane) {
+	case 0:
+		size = sprite0_start;
+		break;
+	case 1:
+		size = sprite1_start - sprite0_start;
+		break;
+	case 2:
+		size = 512 - 1 - sprite1_start;
+		break;
+	default:
+		return 0;
+	}
+
+	DRM_DEBUG_KMS("Pipe %c %s %c FIFO size: %d\n",
+		      pipe_name(pipe), plane == 0 ? "primary" : "sprite",
+		      plane == 0 ? plane_name(pipe) : sprite_name(pipe, plane - 1),
+		      size);
+
+	return size;
+}
+
 static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-- 
2.0.5



More information about the Intel-gfx mailing list