[Intel-gfx] [PATCH 2/5] drm/i915: Kill intel_crtc->active
Matt Roper
matthew.d.roper at intel.com
Sun Mar 8 14:00:42 PDT 2015
Replace all uses of intel_crtc->active with crtc->state->active. At the
moment we don't have atomic state handling wired up for CRTC's so this
means we just directly set the state active field at various points in
our (legacy) modeset pipeline. Once we have CRTC atomic states properly
hooked up, crtc_state->active will be set during the check phase.
Patch generated with Coccinelle via:
// If we already have the base pointer, don't access it through
// intel_crtc->base needlessly.
@@
expression E;
struct intel_crtc *IC;
@@
IC = to_intel_crtc(E);
<+...
- IC->active
+ E->state->active
...+>
// Not sure why the rule above doesn't catch these, but this seems
// to mop up the remainders.
@@
identifier I;
expression E;
@@
{
struct intel_crtc *I = to_intel_crtc(E);
<+...
- I->active
+ E->state->active
...+>
}
// We might have left an unused intel_crtc in some functions; clean that up.
@@
identifier IC;
constant C;
@@
{
...
- struct intel_crtc *IC;
... when != IC
}
// Change all of the other uses of intel_crtc->active
@@
struct intel_crtc *IC;
@@
- IC->active
+ IC->base.state->active
// Ditto
@@
expression E;
@@
- to_intel_crtc(E)->active
+ E->state->active
// Remove the active field from intel_crtc
@@ @@
struct intel_crtc {
...
- bool active;
...
};
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 9 ++-
drivers/gpu/drm/i915/i915_irq.c | 2 +-
drivers/gpu/drm/i915/intel_atomic_plane.c | 4 +-
drivers/gpu/drm/i915/intel_display.c | 129 +++++++++++++++---------------
drivers/gpu/drm/i915/intel_dp.c | 4 +-
drivers/gpu/drm/i915/intel_drv.h | 6 --
drivers/gpu/drm/i915/intel_fbdev.c | 6 +-
drivers/gpu/drm/i915/intel_overlay.c | 2 +-
drivers/gpu/drm/i915/intel_pm.c | 10 +--
drivers/gpu/drm/i915/intel_sprite.c | 6 +-
10 files changed, 86 insertions(+), 92 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 3f64786..28176fd 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2656,9 +2656,10 @@ static int i915_display_info(struct seq_file *m, void *unused)
seq_printf(m, "CRTC %d: pipe: %c, active=%s (size=%dx%d)\n",
crtc->base.base.id, pipe_name(crtc->pipe),
- yesno(crtc->active), crtc->config->pipe_src_w,
+ yesno(crtc->base.state->active),
+ crtc->config->pipe_src_w,
crtc->config->pipe_src_h);
- if (crtc->active) {
+ if (crtc->base.state->active) {
intel_crtc_info(m, crtc);
active = cursor_position(dev, crtc->pipe, &x, &y);
@@ -2951,7 +2952,7 @@ static int i915_drrs_status(struct seq_file *m, void *unused)
for_each_intel_crtc(dev, intel_crtc) {
drm_modeset_lock(&intel_crtc->base.mutex, NULL);
- if (intel_crtc->active) {
+ if (intel_crtc->base.state->active) {
active_crtc_cnt++;
seq_printf(m, "\nCRTC %d: ", active_crtc_cnt);
@@ -3650,7 +3651,7 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
pipe_name(pipe));
drm_modeset_lock(&crtc->base.mutex, NULL);
- if (crtc->active)
+ if (crtc->base.state->active)
intel_wait_for_vblank(dev, pipe);
drm_modeset_unlock(&crtc->base.mutex);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 9baecb7..ac834de 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -649,7 +649,7 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
int ret = 0;
unsigned long irqflags;
- if (!intel_crtc->active) {
+ if (!intel_crtc->base.state->active) {
DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c b/drivers/gpu/drm/i915/intel_atomic_plane.c
index 976b891..43cb21f 100644
--- a/drivers/gpu/drm/i915/intel_atomic_plane.c
+++ b/drivers/gpu/drm/i915/intel_atomic_plane.c
@@ -144,9 +144,9 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
intel_state->clip.x1 = 0;
intel_state->clip.y1 = 0;
intel_state->clip.x2 =
- intel_crtc->active ? intel_crtc->config->pipe_src_w : 0;
+ crtc->state->active ? intel_crtc->config->pipe_src_w : 0;
intel_state->clip.y2 =
- intel_crtc->active ? intel_crtc->config->pipe_src_h : 0;
+ crtc->state->active ? intel_crtc->config->pipe_src_h : 0;
/*
* Disabling a plane is always okay; we just need to update
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 188f87f..b11528f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -897,7 +897,7 @@ bool intel_crtc_active(struct drm_crtc *crtc)
* We can ditch the crtc->primary->fb check as soon as we can
* properly reconstruct framebuffers.
*/
- return intel_crtc->active && crtc->primary->fb &&
+ return crtc->state->active && crtc->primary->fb &&
intel_crtc->config->base.adjusted_mode.crtc_clock;
}
@@ -1591,7 +1591,7 @@ static int intel_num_dvo_pipes(struct drm_device *dev)
int count = 0;
for_each_intel_crtc(dev, crtc)
- count += crtc->active &&
+ count += crtc->base.state->active &&
intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);
return count;
@@ -2168,7 +2168,7 @@ static void intel_disable_primary_hw_plane(struct drm_plane *plane,
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- if (WARN_ON(!intel_crtc->active))
+ if (WARN_ON(!intel_crtc->base.state->active))
return;
if (!intel_crtc->primary_enabled)
@@ -2512,7 +2512,7 @@ intel_find_plane_obj(struct intel_crtc *intel_crtc,
if (c == &intel_crtc->base)
continue;
- if (!i->active)
+ if (!i->base.state->active)
continue;
obj = intel_fb_obj(c->primary->fb);
@@ -2937,15 +2937,13 @@ static void intel_update_primary_planes(struct drm_device *dev)
struct drm_crtc *crtc;
for_each_crtc(dev, crtc) {
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
drm_modeset_lock(&crtc->mutex, NULL);
/*
* FIXME: Once we have proper support for primary planes (and
* disabling them without disabling the entire crtc) allow again
* a NULL crtc->primary->fb.
*/
- if (intel_crtc->active && crtc->primary->fb)
+ if (crtc->state->active && crtc->primary->fb)
dev_priv->display.update_primary_plane(crtc,
crtc->primary->fb,
crtc->x,
@@ -2974,7 +2972,7 @@ void intel_prepare_reset(struct drm_device *dev)
* g33 docs say we should at least disable all the planes.
*/
for_each_intel_crtc(dev, crtc) {
- if (crtc->active)
+ if (crtc->base.state->active)
dev_priv->display.crtc_disable(&crtc->base);
}
}
@@ -3150,7 +3148,7 @@ static void intel_fdi_normal_train(struct drm_crtc *crtc)
static bool pipe_has_enabled_pch(struct intel_crtc *crtc)
{
- return crtc->base.state->enable && crtc->active &&
+ return crtc->base.state->enable && crtc->base.state->active &&
crtc->config->has_pch_encoder;
}
@@ -4306,7 +4304,7 @@ static void intel_crtc_load_lut(struct drm_crtc *crtc)
bool reenable_ips = false;
/* The clocks have to be on to load the palette. */
- if (!crtc->state->enable || !intel_crtc->active)
+ if (!crtc->state->enable || !intel_crtc->base.state->active)
return;
if (!HAS_PCH_SPLIT(dev_priv->dev)) {
@@ -4421,7 +4419,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
WARN_ON(!crtc->state->enable);
- if (intel_crtc->active)
+ if (intel_crtc->base.state->active)
return;
if (intel_crtc->config->has_pch_encoder)
@@ -4439,7 +4437,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
ironlake_set_pipeconf(crtc);
- intel_crtc->active = true;
+ intel_crtc->base.state->active = true;
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
@@ -4504,7 +4502,7 @@ static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
/* We want to get the other_active_crtc only if there's only 1 other
* active crtc. */
for_each_intel_crtc(dev, crtc_it) {
- if (!crtc_it->active || crtc_it == crtc)
+ if (!crtc_it->base.state->active || crtc_it == crtc)
continue;
if (other_active_crtc)
@@ -4529,7 +4527,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
WARN_ON(!crtc->state->enable);
- if (intel_crtc->active)
+ if (intel_crtc->base.state->active)
return;
if (intel_crtc_to_shared_dpll(intel_crtc))
@@ -4554,7 +4552,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
intel_set_pipe_csc(crtc);
- intel_crtc->active = true;
+ intel_crtc->base.state->active = true;
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
for_each_encoder_on_crtc(dev, crtc, encoder)
@@ -4645,7 +4643,7 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
int pipe = intel_crtc->pipe;
u32 reg, temp;
- if (!intel_crtc->active)
+ if (!intel_crtc->base.state->active)
return;
intel_crtc_disable_planes(crtc);
@@ -4693,7 +4691,7 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
ironlake_fdi_pll_disable(intel_crtc);
}
- intel_crtc->active = false;
+ intel_crtc->base.state->active = false;
intel_update_watermarks(crtc);
mutex_lock(&dev->struct_mutex);
@@ -4709,7 +4707,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
struct intel_encoder *encoder;
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
- if (!intel_crtc->active)
+ if (!intel_crtc->base.state->active)
return;
intel_crtc_disable_planes(crtc);
@@ -4748,7 +4746,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
if (encoder->post_disable)
encoder->post_disable(encoder);
- intel_crtc->active = false;
+ intel_crtc->base.state->active = false;
intel_update_watermarks(crtc);
mutex_lock(&dev->struct_mutex);
@@ -5137,7 +5135,7 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
WARN_ON(!crtc->state->enable);
- if (intel_crtc->active)
+ if (intel_crtc->base.state->active)
return;
is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
@@ -5163,7 +5161,7 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
i9xx_set_pipeconf(intel_crtc);
- intel_crtc->active = true;
+ intel_crtc->base.state->active = true;
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
@@ -5220,7 +5218,7 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
WARN_ON(!crtc->state->enable);
- if (intel_crtc->active)
+ if (intel_crtc->base.state->active)
return;
i9xx_set_pll_dividers(intel_crtc);
@@ -5232,7 +5230,7 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
i9xx_set_pipeconf(intel_crtc);
- intel_crtc->active = true;
+ intel_crtc->base.state->active = true;
if (!IS_GEN2(dev))
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
@@ -5295,7 +5293,7 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- if (!intel_crtc->active)
+ if (!intel_crtc->base.state->active)
return;
/*
@@ -5353,7 +5351,7 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
if (!IS_GEN2(dev))
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
- intel_crtc->active = false;
+ intel_crtc->base.state->active = false;
intel_update_watermarks(crtc);
mutex_lock(&dev->struct_mutex);
@@ -5375,7 +5373,7 @@ void intel_crtc_control(struct drm_crtc *crtc, bool enable)
unsigned long domains;
if (enable) {
- if (!intel_crtc->active) {
+ if (!intel_crtc->base.state->active) {
domains = get_crtc_power_domains(crtc);
for_each_power_domain(domain, domains)
intel_display_power_get(dev_priv, domain);
@@ -5384,7 +5382,7 @@ void intel_crtc_control(struct drm_crtc *crtc, bool enable)
dev_priv->display.crtc_enable(crtc);
}
} else {
- if (intel_crtc->active) {
+ if (intel_crtc->base.state->active) {
dev_priv->display.crtc_disable(crtc);
domains = intel_crtc->enabled_power_domains;
@@ -5497,7 +5495,8 @@ static void intel_connector_check_state(struct intel_connector *connector)
I915_STATE_WARN(!crtc->state->enable,
"crtc not enabled\n");
- I915_STATE_WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
+ I915_STATE_WARN(!crtc->state->active,
+ "crtc not active\n");
I915_STATE_WARN(pipe != to_intel_crtc(crtc)->pipe,
"encoder active on the wrong pipe\n");
}
@@ -8032,7 +8031,8 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
struct intel_crtc *crtc;
for_each_intel_crtc(dev, crtc)
- I915_STATE_WARN(crtc->active, "CRTC for pipe %c enabled\n",
+ I915_STATE_WARN(crtc->base.state->active,
+ "CRTC for pipe %c enabled\n",
pipe_name(crtc->pipe));
I915_STATE_WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
@@ -10816,7 +10816,7 @@ static void check_wm_state(struct drm_device *dev)
struct skl_ddb_entry *hw_entry, *sw_entry;
const enum pipe pipe = intel_crtc->pipe;
- if (!intel_crtc->active)
+ if (!intel_crtc->base.state->active)
continue;
/* planes */
@@ -10945,7 +10945,7 @@ check_crtc_state(struct drm_device *dev)
DRM_DEBUG_KMS("[CRTC:%d]\n",
crtc->base.base.id);
- I915_STATE_WARN(crtc->active && !crtc->base.state->enable,
+ I915_STATE_WARN(crtc->base.state->active && !crtc->base.state->enable,
"active crtc, but not enabled in sw tracking\n");
for_each_intel_encoder(dev, encoder) {
@@ -10956,9 +10956,10 @@ check_crtc_state(struct drm_device *dev)
active = true;
}
- I915_STATE_WARN(active != crtc->active,
+ I915_STATE_WARN(active != crtc->base.state->active,
"crtc's computed active state doesn't match tracked active state "
- "(expected %i, found %i)\n", active, crtc->active);
+ "(expected %i, found %i)\n", active,
+ crtc->base.state->active);
I915_STATE_WARN(enabled != crtc->base.state->enable,
"crtc's computed enabled state doesn't match tracked enabled state "
"(expected %i, found %i)\n", enabled,
@@ -10970,7 +10971,7 @@ check_crtc_state(struct drm_device *dev)
/* hw state is inconsistent with the pipe quirk */
if ((crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
(crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
- active = crtc->active;
+ active = crtc->base.state->active;
for_each_intel_encoder(dev, encoder) {
enum pipe pipe;
@@ -10980,9 +10981,10 @@ check_crtc_state(struct drm_device *dev)
encoder->get_config(encoder, &pipe_config);
}
- I915_STATE_WARN(crtc->active != active,
+ I915_STATE_WARN(crtc->base.state->active != active,
"crtc active state doesn't match with hw state "
- "(expected %i, found %i)\n", crtc->active, active);
+ "(expected %i, found %i)\n", crtc->base.state->active,
+ active);
if (active &&
!intel_pipe_config_compare(dev, crtc->config, &pipe_config)) {
@@ -11028,7 +11030,7 @@ check_shared_dpll_state(struct drm_device *dev)
for_each_intel_crtc(dev, crtc) {
if (crtc->base.state->enable && intel_crtc_to_shared_dpll(crtc) == pll)
enabled_crtcs++;
- if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
+ if (crtc->base.state->active && intel_crtc_to_shared_dpll(crtc) == pll)
active_crtcs++;
}
I915_STATE_WARN(pll->active != active_crtcs,
@@ -11449,10 +11451,7 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set,
* in fastboot situations.
*/
if (set->crtc->primary->fb == NULL) {
- struct intel_crtc *intel_crtc =
- to_intel_crtc(set->crtc);
-
- if (intel_crtc->active) {
+ if (set->crtc->state->active) {
DRM_DEBUG_KMS("crtc has no fb, will flip\n");
config->fb_changed = true;
} else {
@@ -11738,7 +11737,7 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
* has previously been turned off.
*/
if (!intel_crtc->primary_enabled && ret == 0) {
- WARN_ON(!intel_crtc->active);
+ WARN_ON(!set->crtc->state->active);
intel_enable_primary_hw_plane(set->crtc->primary, set->crtc);
}
@@ -12001,7 +12000,7 @@ intel_check_primary_plane(struct drm_plane *plane,
if (ret)
return ret;
- if (intel_crtc->active) {
+ if (crtc->state->active) {
intel_crtc->atomic.wait_for_flips = true;
/*
@@ -12068,7 +12067,7 @@ intel_commit_primary_plane(struct drm_plane *plane,
intel_plane->obj = obj;
- if (intel_crtc->active) {
+ if (crtc->state->active) {
if (state->visible) {
/* FIXME: kill this fastboot hack */
intel_update_pipe_size(intel_crtc);
@@ -12138,7 +12137,7 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc)
intel_runtime_pm_get(dev_priv);
/* Perform vblank evasion around commit operation */
- if (intel_crtc->active)
+ if (intel_crtc->base.state->active)
intel_crtc->atomic.evade =
intel_pipe_update_start(intel_crtc,
&intel_crtc->atomic.start_vbl_count);
@@ -12313,7 +12312,7 @@ intel_check_cursor_plane(struct drm_plane *plane,
}
finish:
- if (intel_crtc->active) {
+ if (crtc->state->active) {
if (intel_crtc->base.cursor->state->crtc_w != state->base.crtc_w)
intel_crtc->atomic.update_wm = true;
@@ -12358,7 +12357,7 @@ intel_commit_cursor_plane(struct drm_plane *plane,
intel_crtc->cursor_bo = obj;
update:
- if (intel_crtc->active)
+ if (crtc->state->active)
intel_crtc_update_cursor(crtc, state->visible);
}
@@ -13399,7 +13398,7 @@ void intel_modeset_init(struct drm_device *dev)
drm_modeset_unlock_all(dev);
for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
+ if (!crtc->base.state->active)
continue;
/*
@@ -13477,7 +13476,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
/* restore vblank interrupts to correct state */
drm_crtc_vblank_reset(&crtc->base);
- if (crtc->active) {
+ if (crtc->base.state->active) {
update_scanline_offset(crtc);
drm_crtc_vblank_on(&crtc->base);
}
@@ -13517,13 +13516,13 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
connector->encoder->connectors_active = false;
}
- WARN_ON(crtc->active);
+ WARN_ON(crtc->base.state->active);
crtc->base.state->enable = false;
crtc->base.enabled = false;
}
if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
- crtc->pipe == PIPE_A && !crtc->active) {
+ crtc->pipe == PIPE_A && !crtc->base.state->active) {
/* BIOS forgot to enable pipe A, this mostly happens after
* resume. Force-enable the pipe to fix this, the update_dpms
* call below we restore the pipe to the right state, but leave
@@ -13535,7 +13534,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
* have active connectors/encoders. */
intel_crtc_update_dpms(&crtc->base);
- if (crtc->active != crtc->base.state->enable) {
+ if (crtc->base.state->active != crtc->base.state->enable) {
struct intel_encoder *encoder;
/* This can happen either due to bugs in the get_hw_state
@@ -13544,17 +13543,17 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
crtc->base.base.id,
crtc->base.state->enable ? "enabled" : "disabled",
- crtc->active ? "enabled" : "disabled");
+ crtc->base.state->active ? "enabled" : "disabled");
- crtc->base.state->enable = crtc->active;
- crtc->base.enabled = crtc->active;
+ crtc->base.state->enable = crtc->base.state->active;
+ crtc->base.enabled = crtc->base.state->active;
/* Because we only establish the connector -> encoder ->
* crtc links if something is active, this means the
* crtc is now deactivated. Break the links. connector
* -> encoder links are only establish when things are
* actually up, hence no need to break them. */
- WARN_ON(crtc->active);
+ WARN_ON(crtc->base.state->active);
for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
WARN_ON(encoder->connectors_active);
@@ -13562,7 +13561,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
}
}
- if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
+ if (crtc->base.state->active || HAS_GMCH_DISPLAY(dev)) {
/*
* We start out with underrun reporting disabled to avoid races.
* For correct bookkeeping mark this on active crtcs.
@@ -13590,7 +13589,7 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder)
* encoder is active and trying to read from a pipe) and the
* pipe itself being active. */
bool has_active_crtc = encoder->base.crtc &&
- to_intel_crtc(encoder->base.crtc)->active;
+ encoder->base.crtc->state->active;
if (encoder->connectors_active && !has_active_crtc) {
DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
@@ -13658,7 +13657,7 @@ static bool primary_get_hw_state(struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
- if (!crtc->active)
+ if (!crtc->base.state->active)
return false;
return I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE;
@@ -13678,16 +13677,16 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
crtc->config->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
- crtc->active = dev_priv->display.get_pipe_config(crtc,
+ crtc->base.state->active = dev_priv->display.get_pipe_config(crtc,
crtc->config);
- crtc->base.state->enable = crtc->active;
- crtc->base.enabled = crtc->active;
+ crtc->base.state->enable = crtc->base.state->active;
+ crtc->base.enabled = crtc->base.state->active;
crtc->primary_enabled = primary_get_hw_state(crtc);
DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
crtc->base.base.id,
- crtc->active ? "enabled" : "disabled");
+ crtc->base.state->active ? "enabled" : "disabled");
}
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
@@ -13698,7 +13697,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
pll->active = 0;
pll->config.crtc_mask = 0;
for_each_intel_crtc(dev, crtc) {
- if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll) {
+ if (crtc->base.state->active && intel_crtc_to_shared_dpll(crtc) == pll) {
pll->active++;
pll->config.crtc_mask |= 1 << crtc->pipe;
}
@@ -13765,7 +13764,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
* checking everywhere.
*/
for_each_intel_crtc(dev, crtc) {
- if (crtc->active && i915.fastboot) {
+ if (crtc->base.state->active && i915.fastboot) {
intel_mode_from_pipe_config(&crtc->base.mode,
crtc->config);
DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 33d5877..e4f447f 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3974,7 +3974,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
if (WARN_ON(!intel_encoder->base.crtc))
return;
- if (!to_intel_crtc(intel_encoder->base.crtc)->active)
+ if (!intel_encoder->base.crtc->state->active)
return;
/* Try to read receiver status if the link appears to be up */
@@ -4955,7 +4955,7 @@ static void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate)
return;
}
- if (!intel_crtc->active) {
+ if (!intel_crtc->base.state->active) {
DRM_DEBUG_KMS("eDP encoder disabled. CRTC not Active\n");
return;
}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index ff79dca..d194948 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -443,12 +443,6 @@ struct intel_crtc {
enum pipe pipe;
enum plane plane;
u8 lut_r[256], lut_g[256], lut_b[256];
- /*
- * Whether the crtc and the connected output pipeline is active. Implies
- * that crtc->enabled is set, i.e. the current mode configuration has
- * some outputs connected to this crtc.
- */
- bool active;
unsigned long enabled_power_domains;
bool primary_enabled; /* is the primary plane (partially) visible? */
bool lowfreq_avail;
diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index 234a699..192d229 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -541,7 +541,7 @@ static bool intel_fbdev_init_bios(struct drm_device *dev,
for_each_crtc(dev, crtc) {
intel_crtc = to_intel_crtc(crtc);
- if (!intel_crtc->active || !crtc->primary->fb) {
+ if (!intel_crtc->base.state->active || !crtc->primary->fb) {
DRM_DEBUG_KMS("pipe %c not active or no fb, skipping\n",
pipe_name(intel_crtc->pipe));
continue;
@@ -567,7 +567,7 @@ static bool intel_fbdev_init_bios(struct drm_device *dev,
intel_crtc = to_intel_crtc(crtc);
- if (!intel_crtc->active) {
+ if (!intel_crtc->base.state->active) {
DRM_DEBUG_KMS("pipe %c not active, skipping\n",
pipe_name(intel_crtc->pipe));
continue;
@@ -632,7 +632,7 @@ static bool intel_fbdev_init_bios(struct drm_device *dev,
for_each_crtc(dev, crtc) {
intel_crtc = to_intel_crtc(crtc);
- if (!intel_crtc->active)
+ if (!intel_crtc->base.state->active)
continue;
WARN(!crtc->primary->fb,
diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index 823d1d9..050a68e 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -852,7 +852,7 @@ int intel_overlay_switch_off(struct intel_overlay *overlay)
static int check_overlay_possible_on_crtc(struct intel_overlay *overlay,
struct intel_crtc *crtc)
{
- if (!crtc->active)
+ if (!crtc->base.state->active)
return -EINVAL;
/* can't use the overlay with double wide pipe */
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 4f04fab..d9b115e 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -822,7 +822,7 @@ static uint8_t vlv_compute_drain_latency(struct drm_crtc *crtc,
* FIXME the plane might have an fb
* but be invisible (eg. due to clipping)
*/
- if (!intel_crtc->active || !plane->state->fb)
+ if (!intel_crtc->base.state->active || !plane->state->fb)
return 0;
if (WARN(clock == 0, "Pixel clock is zero!\n"))
@@ -3080,7 +3080,7 @@ static void skl_flush_wm_values(struct drm_i915_private *dev_priv,
* re-allocate the freed space without this pipe fetching from it.
*/
for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
+ if (!crtc->base.state->active)
continue;
pipe = crtc->pipe;
@@ -3103,7 +3103,7 @@ static void skl_flush_wm_values(struct drm_i915_private *dev_priv,
* space is not used anymore.
*/
for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
+ if (!crtc->base.state->active)
continue;
pipe = crtc->pipe;
@@ -3126,7 +3126,7 @@ static void skl_flush_wm_values(struct drm_i915_private *dev_priv,
* will just get more DDB space with the correct WM values.
*/
for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
+ if (!crtc->base.state->active)
continue;
pipe = crtc->pipe;
@@ -3191,7 +3191,7 @@ static void skl_update_other_pipe_wm(struct drm_device *dev,
if (this_crtc->pipe == intel_crtc->pipe)
continue;
- if (!intel_crtc->active)
+ if (!intel_crtc->base.state->active)
continue;
wm_changed = skl_update_pipe_wm(&intel_crtc->base,
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 7051da7..7ad9b7d 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -1242,9 +1242,9 @@ finish:
*/
state->hides_primary = fb != NULL && drm_rect_equals(dst, clip) &&
!colorkey_enabled(intel_plane);
- WARN_ON(state->hides_primary && !state->visible && intel_crtc->active);
+ WARN_ON(state->hides_primary && !state->visible && state->base.crtc->state->active);
- if (intel_crtc->active) {
+ if (intel_crtc->base.state->active) {
if (intel_crtc->primary_enabled == state->hides_primary)
intel_crtc->atomic.wait_for_flips = true;
@@ -1286,7 +1286,7 @@ intel_commit_sprite_plane(struct drm_plane *plane,
plane->fb = state->base.fb;
intel_plane->obj = obj;
- if (intel_crtc->active) {
+ if (crtc->state->active) {
intel_crtc->primary_enabled = !state->hides_primary;
if (state->visible) {
--
1.8.5.1
More information about the Intel-gfx
mailing list