[Intel-gfx] [PATCH 5/9] drm/i915: Pass primary plane size to .update_primary_plane()
Ville Syrjälä
ville.syrjala at linux.intel.com
Tue Mar 10 10:59:15 PDT 2015
On Tue, Mar 10, 2015 at 10:10:40AM -0700, Matt Roper wrote:
> On Tue, Mar 10, 2015 at 01:15:25PM +0200, ville.syrjala at linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >
> > In preparation to movable/resizable primary planes pass the clipped
> > plane size to .update_primary_plane().
>
> Personally I feel like it would make more sense to just completely kill
> off .update_primary_plane() now rather than trying to evolve it. We
> already have an intel_plane->update_plane() function pointer which is
> never set or called for non-sprites at the moment. We could unify the
> handling of low-level plane programming by just using that function
> pointer for primary planes as well.
I want to kill it off as well, but that means either killing off
set_base_atomic() or making it use the plane commit hook. I suppose we
could hand craft a suitable plane state for it and just commit that
without any checks or anything?
>
> I wouldn't mind also seeing the name of that low-level entrypoint
> renamed to something like 'update_hw_plane' to avoid confusion with the
> drm_plane entrypoint...
>
>
> Matt
>
> >
> > Cc: Sonika Jindal <sonika.jindal at intel.com>
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_drv.h | 3 +-
> > drivers/gpu/drm/i915/intel_display.c | 63 ++++++++++++++++++++----------------
> > 2 files changed, 38 insertions(+), 28 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index b16c0a7..e99eef0 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -578,7 +578,8 @@ struct drm_i915_display_funcs {
> > uint32_t flags);
> > void (*update_primary_plane)(struct drm_crtc *crtc,
> > struct drm_framebuffer *fb,
> > - int x, int y);
> > + int x, int y,
> > + int crtc_w, int crtc_h);
> > void (*hpd_irq_setup)(struct drm_device *dev);
> > /* clock updates for mode set */
> > /* cursor updates */
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index fdc83f1..1a789f0 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -2482,7 +2482,8 @@ intel_find_plane_obj(struct intel_crtc *intel_crtc,
> >
> > static void i9xx_update_primary_plane(struct drm_crtc *crtc,
> > struct drm_framebuffer *fb,
> > - int x, int y)
> > + int x, int y,
> > + int crtc_w, int crtc_h)
> > {
> > struct drm_device *dev = crtc->dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > @@ -2517,20 +2518,16 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc,
> > if (INTEL_INFO(dev)->gen < 4) {
> > if (intel_crtc->pipe == PIPE_B)
> > dspcntr |= DISPPLANE_SEL_PIPE_B;
> > -
> > - /* pipesrc and dspsize control the size that is scaled from,
> > - * which should always be the user's requested size.
> > - */
> > - I915_WRITE(DSPSIZE(plane),
> > - ((intel_crtc->config->pipe_src_h - 1) << 16) |
> > - (intel_crtc->config->pipe_src_w - 1));
> > + I915_WRITE(DSPSIZE(plane), ((crtc_h - 1) << 16) | (crtc_w - 1));
> > I915_WRITE(DSPPOS(plane), 0);
> > } else if (IS_CHERRYVIEW(dev) && plane == PLANE_B) {
> > - I915_WRITE(PRIMSIZE(plane),
> > - ((intel_crtc->config->pipe_src_h - 1) << 16) |
> > - (intel_crtc->config->pipe_src_w - 1));
> > + I915_WRITE(PRIMSIZE(plane), ((crtc_h - 1) << 16) | (crtc_w - 1));
> > I915_WRITE(PRIMPOS(plane), 0);
> > I915_WRITE(PRIMCNSTALPHA(plane), 0);
> > + } else {
> > + WARN_ONCE(crtc_w != intel_crtc->config->pipe_src_w ||
> > + crtc_h != intel_crtc->config->pipe_src_h,
> > + "primary plane size doesn't match pipe size\n");
> > }
> >
> > switch (fb->pixel_format) {
> > @@ -2586,14 +2583,14 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc,
> > if (crtc->primary->state->rotation == BIT(DRM_ROTATE_180)) {
> > dspcntr |= DISPPLANE_ROTATE_180;
> >
> > - x += (intel_crtc->config->pipe_src_w - 1);
> > - y += (intel_crtc->config->pipe_src_h - 1);
> > + x += (crtc_w - 1);
> > + y += (crtc_h - 1);
> >
> > /* Finding the last pixel of the last line of the display
> > data and adding to linear_offset*/
> > linear_offset +=
> > - (intel_crtc->config->pipe_src_h - 1) * fb->pitches[0] +
> > - (intel_crtc->config->pipe_src_w - 1) * pixel_size;
> > + (crtc_h - 1) * fb->pitches[0] +
> > + (crtc_w - 1) * pixel_size;
> > }
> >
> > I915_WRITE(reg, dspcntr);
> > @@ -2611,7 +2608,8 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc,
> >
> > static void ironlake_update_primary_plane(struct drm_crtc *crtc,
> > struct drm_framebuffer *fb,
> > - int x, int y)
> > + int x, int y,
> > + int crtc_w, int crtc_h)
> > {
> > struct drm_device *dev = crtc->dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > @@ -2643,6 +2641,10 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc,
> > if (IS_HASWELL(dev) || IS_BROADWELL(dev))
> > dspcntr |= DISPPLANE_PIPE_CSC_ENABLE;
> >
> > + WARN_ONCE(crtc_w != intel_crtc->config->pipe_src_w ||
> > + crtc_h != intel_crtc->config->pipe_src_h,
> > + "primary plane size doesn't match pipe size\n");
> > +
> > switch (fb->pixel_format) {
> > case DRM_FORMAT_C8:
> > dspcntr |= DISPPLANE_8BPP;
> > @@ -2686,14 +2688,14 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc,
> > dspcntr |= DISPPLANE_ROTATE_180;
> >
> > if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
> > - x += (intel_crtc->config->pipe_src_w - 1);
> > - y += (intel_crtc->config->pipe_src_h - 1);
> > + x += (crtc_w - 1);
> > + y += (crtc_h - 1);
> >
> > /* Finding the last pixel of the last line of the display
> > data and adding to linear_offset*/
> > linear_offset +=
> > - (intel_crtc->config->pipe_src_h - 1) * fb->pitches[0] +
> > - (intel_crtc->config->pipe_src_w - 1) * pixel_size;
> > + (crtc_h - 1) * fb->pitches[0] +
> > + (crtc_w - 1) * pixel_size;
> > }
> > }
> >
> > @@ -2747,7 +2749,8 @@ u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier,
> >
> > static void skylake_update_primary_plane(struct drm_crtc *crtc,
> > struct drm_framebuffer *fb,
> > - int x, int y)
> > + int x, int y,
> > + int crtc_w, int crtc_h)
> > {
> > struct drm_device *dev = crtc->dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > @@ -2826,9 +2829,7 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
> >
> > I915_WRITE(PLANE_POS(pipe, 0), 0);
> > I915_WRITE(PLANE_OFFSET(pipe, 0), (y << 16) | x);
> > - I915_WRITE(PLANE_SIZE(pipe, 0),
> > - (intel_crtc->config->pipe_src_h - 1) << 16 |
> > - (intel_crtc->config->pipe_src_w - 1));
> > + I915_WRITE(PLANE_SIZE(pipe, 0), ((crtc_h - 1) << 16) | (crtc_w - 1));
> > I915_WRITE(PLANE_STRIDE(pipe, 0), fb->pitches[0] / stride_div);
> > I915_WRITE(PLANE_SURF(pipe, 0), i915_gem_obj_ggtt_offset(obj));
> >
> > @@ -2845,12 +2846,16 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
> > {
> > struct drm_device *dev = crtc->dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> >
> > if (dev_priv->display.disable_fbc)
> > dev_priv->display.disable_fbc(dev);
> >
> > + /* FIXME: this will go badly if the fb isn't big enough */
> > to_intel_crtc(crtc)->primary_enabled = true;
> > - dev_priv->display.update_primary_plane(crtc, fb, x, y);
> > + dev_priv->display.update_primary_plane(crtc, fb, x, y,
> > + intel_crtc->config->pipe_src_w,
> > + intel_crtc->config->pipe_src_h);
> >
> > return 0;
> > }
> > @@ -2885,7 +2890,9 @@ static void intel_update_primary_planes(struct drm_device *dev)
> > dev_priv->display.update_primary_plane(crtc,
> > state->base.fb,
> > state->src.x1 >> 16,
> > - state->src.y1 >> 16);
> > + state->src.y1 >> 16,
> > + drm_rect_width(&state->dst),
> > + drm_rect_height(&state->dst));
> > }
> >
> > drm_modeset_unlock(&crtc->mutex);
> > @@ -12019,7 +12026,9 @@ intel_commit_primary_plane(struct drm_plane *plane,
> > dev_priv->display.update_primary_plane(crtc,
> > state->base.fb,
> > state->src.x1 >> 16,
> > - state->src.y1 >> 16);
> > + state->src.y1 >> 16,
> > + drm_rect_width(&state->dst),
> > + drm_rect_height(&state->dst));
> > }
> > }
> >
> > --
> > 2.0.5
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Matt Roper
> Graphics Software Engineer
> IoTG Platform Enabling & Development
> Intel Corporation
> (916) 356-2795
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list