[Intel-gfx] [PATCH 03/11] drm/i915/skl: Updated the gen6_init_rps_frequencies function

[Ville Syrjälä]

On Fri, Mar 06, 2015 at 11:07:16AM +0530, akash.goel at intel.com wrote:
> From: Akash Goel <akash.goel at intel.com>
> 
> On SKL the frequency is specified in units of 16.66 MHZ, barring the
> RP_STATE_CAP(0x5998) register, which still reports frequency in units
> of 50 MHZ. So an extra conversion is required in gen6_init_rps_frequencies
> function for SKL, to store the frequency values as per the actual hardware unit.
> 
> v2: Corrected the conversion from 50 to 16.66 MHZ (Ville)
> 
> Signed-off-by: Akash Goel <akash.goel at intel.com>

Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

> ---
>  drivers/gpu/drm/i915/intel_pm.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 1b44eee..81eaa0c 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -4080,6 +4080,13 @@ static void gen6_init_rps_frequencies(struct drm_device *dev)
>  	dev_priv->rps.rp0_freq		= (rp_state_cap >>  0) & 0xff;
>  	dev_priv->rps.rp1_freq		= (rp_state_cap >>  8) & 0xff;
>  	dev_priv->rps.min_freq		= (rp_state_cap >> 16) & 0xff;
> +	if (IS_SKYLAKE(dev)) {
> +		/* Store the frequency values in 16.66 MHZ units, which is
> +		   the natural hardware unit for SKL */
> +		dev_priv->rps.rp0_freq *= GEN9_FREQ_SCALER;
> +		dev_priv->rps.rp1_freq *= GEN9_FREQ_SCALER;
> +		dev_priv->rps.min_freq *= GEN9_FREQ_SCALER;
> +	}
>  	/* hw_max = RP0 until we check for overclocking */
>  	dev_priv->rps.max_freq		= dev_priv->rps.rp0_freq;
>  
> -- 
> 1.9.2
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC