[Intel-gfx] [PATCH 17/19] drm/i915: Convert intel_pipe_will_have_type() to using atomic state
Ander Conselvan de Oliveira
ander.conselvan.de.oliveira at intel.com
Fri Mar 13 02:49:00 PDT 2015
Pass a crtc_state to it and find whether the pipe has an encoder of a
given type by looking at the drm_atomic_state the crtc_state points to.
Until recently i9xx_get_refclk() used to be called indirectly from
vlv_force_pll_on() with a dummy crtc_state. That dummy crtc state is not
converted to be part of a full drm atomic state, so add a WARN in case
someone decides to call that again with such a dummy state.
v2: Warn if there is no connectors for a given crtc. (Daniel)
Replace comment i9xx_get_refclk() with a WARN_ON(). (Ander)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 2 +-
drivers/gpu/drm/i915/intel_display.c | 133 +++++++++++++++++++++--------------
2 files changed, 83 insertions(+), 52 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 490ab8c..576e101 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -541,7 +541,7 @@ struct drm_i915_display_funcs {
* Returns true on success, false on failure.
*/
bool (*find_dpll)(const struct intel_limit *limit,
- struct intel_crtc *crtc,
+ struct intel_crtc_state *crtc_state,
int target, int refclk,
struct dpll *match_clock,
struct dpll *best_clock);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 8c97186..be1979e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -431,25 +431,41 @@ bool intel_pipe_has_type(struct intel_crtc *crtc, enum intel_output_type type)
* intel_pipe_has_type() but looking at encoder->new_crtc instead of
* encoder->crtc.
*/
-static bool intel_pipe_will_have_type(struct intel_crtc *crtc, int type)
+static bool intel_pipe_will_have_type(const struct intel_crtc_state *crtc_state,
+ int type)
{
- struct drm_device *dev = crtc->base.dev;
+ struct drm_atomic_state *state = crtc_state->base.state;
+ struct drm_connector_state *connector_state;
struct intel_encoder *encoder;
+ int i, num_connectors = 0;
+
+ for (i = 0; i < state->num_connector; i++) {
+ if (!state->connectors[i])
+ continue;
+
+ connector_state = state->connector_states[i];
+ if (connector_state->crtc != crtc_state->base.crtc)
+ continue;
+
+ num_connectors++;
- for_each_intel_encoder(dev, encoder)
- if (encoder->new_crtc == crtc && encoder->type == type)
+ encoder = to_intel_encoder(connector_state->best_encoder);
+ if (encoder->type == type)
return true;
+ }
+
+ WARN_ON(num_connectors == 0);
return false;
}
-static const intel_limit_t *intel_ironlake_limit(struct intel_crtc *crtc,
- int refclk)
+static const intel_limit_t *
+intel_ironlake_limit(struct intel_crtc_state *crtc_state, int refclk)
{
- struct drm_device *dev = crtc->base.dev;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
const intel_limit_t *limit;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_is_dual_link_lvds(dev)) {
if (refclk == 100000)
limit = &intel_limits_ironlake_dual_lvds_100m;
@@ -467,20 +483,21 @@ static const intel_limit_t *intel_ironlake_limit(struct intel_crtc *crtc,
return limit;
}
-static const intel_limit_t *intel_g4x_limit(struct intel_crtc *crtc)
+static const intel_limit_t *
+intel_g4x_limit(struct intel_crtc_state *crtc_state)
{
- struct drm_device *dev = crtc->base.dev;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
const intel_limit_t *limit;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_is_dual_link_lvds(dev))
limit = &intel_limits_g4x_dual_channel_lvds;
else
limit = &intel_limits_g4x_single_channel_lvds;
- } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_HDMI) ||
- intel_pipe_will_have_type(crtc, INTEL_OUTPUT_ANALOG)) {
+ } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI) ||
+ intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
limit = &intel_limits_g4x_hdmi;
- } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_SDVO)) {
+ } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO)) {
limit = &intel_limits_g4x_sdvo;
} else /* The option is for other outputs */
limit = &intel_limits_i9xx_sdvo;
@@ -488,17 +505,18 @@ static const intel_limit_t *intel_g4x_limit(struct intel_crtc *crtc)
return limit;
}
-static const intel_limit_t *intel_limit(struct intel_crtc *crtc, int refclk)
+static const intel_limit_t *
+intel_limit(struct intel_crtc_state *crtc_state, int refclk)
{
- struct drm_device *dev = crtc->base.dev;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
const intel_limit_t *limit;
if (HAS_PCH_SPLIT(dev))
- limit = intel_ironlake_limit(crtc, refclk);
+ limit = intel_ironlake_limit(crtc_state, refclk);
else if (IS_G4X(dev)) {
- limit = intel_g4x_limit(crtc);
+ limit = intel_g4x_limit(crtc_state);
} else if (IS_PINEVIEW(dev)) {
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
limit = &intel_limits_pineview_lvds;
else
limit = &intel_limits_pineview_sdvo;
@@ -507,14 +525,14 @@ static const intel_limit_t *intel_limit(struct intel_crtc *crtc, int refclk)
} else if (IS_VALLEYVIEW(dev)) {
limit = &intel_limits_vlv;
} else if (!IS_GEN2(dev)) {
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
limit = &intel_limits_i9xx_lvds;
else
limit = &intel_limits_i9xx_sdvo;
} else {
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
limit = &intel_limits_i8xx_lvds;
- else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_DVO))
+ else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO))
limit = &intel_limits_i8xx_dvo;
else
limit = &intel_limits_i8xx_dac;
@@ -601,15 +619,17 @@ static bool intel_PLL_is_valid(struct drm_device *dev,
}
static bool
-i9xx_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
+i9xx_find_best_dpll(const intel_limit_t *limit,
+ struct intel_crtc_state *crtc_state,
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_device *dev = crtc->base.dev;
intel_clock_t clock;
int err = target;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
/*
* For LVDS just rely on its current settings for dual-channel.
* We haven't figured out how to reliably set up different
@@ -662,15 +682,17 @@ i9xx_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
}
static bool
-pnv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
+pnv_find_best_dpll(const intel_limit_t *limit,
+ struct intel_crtc_state *crtc_state,
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_device *dev = crtc->base.dev;
intel_clock_t clock;
int err = target;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
/*
* For LVDS just rely on its current settings for dual-channel.
* We haven't figured out how to reliably set up different
@@ -721,10 +743,12 @@ pnv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
}
static bool
-g4x_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
+g4x_find_best_dpll(const intel_limit_t *limit,
+ struct intel_crtc_state *crtc_state,
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_device *dev = crtc->base.dev;
intel_clock_t clock;
int max_n;
@@ -733,7 +757,7 @@ g4x_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
int err_most = (target >> 8) + (target >> 9);
found = false;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_is_dual_link_lvds(dev))
clock.p2 = limit->p2.p2_fast;
else
@@ -778,10 +802,12 @@ g4x_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
}
static bool
-vlv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
+vlv_find_best_dpll(const intel_limit_t *limit,
+ struct intel_crtc_state *crtc_state,
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_device *dev = crtc->base.dev;
intel_clock_t clock;
unsigned int bestppm = 1000000;
@@ -835,10 +861,12 @@ vlv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
}
static bool
-chv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
+chv_find_best_dpll(const intel_limit_t *limit,
+ struct intel_crtc_state *crtc_state,
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_device *dev = crtc->base.dev;
intel_clock_t clock;
uint64_t m2;
@@ -5726,7 +5754,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
* - LVDS dual channel mode
* - Double wide pipe
*/
- if ((intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
+ if ((intel_pipe_will_have_type(pipe_config, INTEL_OUTPUT_LVDS) &&
intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
pipe_config->pipe_src_w &= ~1;
@@ -5905,15 +5933,18 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
}
-static int i9xx_get_refclk(struct intel_crtc *crtc, int num_connectors)
+static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
+ int num_connectors)
{
- struct drm_device *dev = crtc->base.dev;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int refclk;
+ WARN_ON(!crtc_state->base.state);
+
if (IS_VALLEYVIEW(dev)) {
refclk = 100000;
- } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
+ } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
refclk = dev_priv->vbt.lvds_ssc_freq;
DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
@@ -5956,7 +5987,7 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
crtc_state->dpll_hw_state.fp0 = fp;
crtc->lowfreq_avail = false;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
reduced_clock && i915.powersave) {
crtc_state->dpll_hw_state.fp1 = fp2;
crtc->lowfreq_avail = true;
@@ -6314,6 +6345,7 @@ void vlv_force_pll_on(struct drm_device *dev, enum pipe pipe,
struct intel_crtc *crtc =
to_intel_crtc(intel_get_crtc_for_pipe(dev, pipe));
struct intel_crtc_state pipe_config = {
+ .base.crtc = &crtc->base,
.pixel_multiplier = 1,
.dpll = *dpll,
};
@@ -6358,12 +6390,12 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
- is_sdvo = intel_pipe_will_have_type(crtc, INTEL_OUTPUT_SDVO) ||
- intel_pipe_will_have_type(crtc, INTEL_OUTPUT_HDMI);
+ is_sdvo = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO) ||
+ intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI);
dpll = DPLL_VGA_MODE_DIS;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
dpll |= DPLLB_MODE_LVDS;
else
dpll |= DPLLB_MODE_DAC_SERIAL;
@@ -6406,7 +6438,7 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
if (crtc_state->sdvo_tv_clock)
dpll |= PLL_REF_INPUT_TVCLKINBC;
- else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
+ else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv) && num_connectors < 2)
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
@@ -6436,7 +6468,7 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
dpll = DPLL_VGA_MODE_DIS;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
} else {
if (clock->p1 == 2)
@@ -6447,10 +6479,10 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
dpll |= PLL_P2_DIVIDE_BY_4;
}
- if (!IS_I830(dev) && intel_pipe_will_have_type(crtc, INTEL_OUTPUT_DVO))
+ if (!IS_I830(dev) && intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO))
dpll |= DPLL_DVO_2X_MODE;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv) && num_connectors < 2)
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
@@ -6687,7 +6719,7 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
return 0;
if (!crtc_state->clock_set) {
- refclk = i9xx_get_refclk(crtc, num_connectors);
+ refclk = i9xx_get_refclk(crtc_state, num_connectors);
/*
* Returns a set of divisors for the desired target clock with
@@ -6695,8 +6727,8 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
* the clock equation: reflck * (5 * (m1 + 2) + (m2 + 2)) / (n +
* 2) / p1 / p2.
*/
- limit = intel_limit(crtc, refclk);
- ok = dev_priv->display.find_dpll(limit, crtc,
+ limit = intel_limit(crtc_state, refclk);
+ ok = dev_priv->display.find_dpll(limit, crtc_state,
crtc_state->port_clock,
refclk, NULL, &clock);
if (!ok) {
@@ -6712,7 +6744,7 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
* we will disable the LVDS downclock feature.
*/
has_reduced_clock =
- dev_priv->display.find_dpll(limit, crtc,
+ dev_priv->display.find_dpll(limit, crtc_state,
dev_priv->lvds_downclock,
refclk, &clock,
&reduced_clock);
@@ -7540,12 +7572,11 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int refclk;
const intel_limit_t *limit;
bool ret, is_lvds = false;
- is_lvds = intel_pipe_will_have_type(intel_crtc, INTEL_OUTPUT_LVDS);
+ is_lvds = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS);
refclk = ironlake_get_refclk(crtc);
@@ -7554,8 +7585,8 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
* refclk, or FALSE. The returned values represent the clock equation:
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*/
- limit = intel_limit(intel_crtc, refclk);
- ret = dev_priv->display.find_dpll(limit, intel_crtc,
+ limit = intel_limit(crtc_state, refclk);
+ ret = dev_priv->display.find_dpll(limit, crtc_state,
crtc_state->port_clock,
refclk, NULL, clock);
if (!ret)
@@ -7569,7 +7600,7 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
* downclock feature.
*/
*has_reduced_clock =
- dev_priv->display.find_dpll(limit, intel_crtc,
+ dev_priv->display.find_dpll(limit, crtc_state,
dev_priv->lvds_downclock,
refclk, clock,
reduced_clock);
--
2.1.0
More information about the Intel-gfx
mailing list