[Intel-gfx] [PATCH 29/49] drm/i915: Rename vlv_cdclk_freq to cdclk_freq
Daniel Vetter
daniel at ffwll.ch
Tue Mar 17 03:54:52 PDT 2015
On Tue, Mar 17, 2015 at 11:39:55AM +0200, Imre Deak wrote:
> From: Vandana Kannan <vandana.kannan at intel.com>
>
> Rename vlv_cdclk_freq to cdclk_freq so that it can be used for all
> platforms as required. Needed by the next patch.
Nah, we name functions by the first platform that introduces them, not
just drop the prefix when it's used for a bit longer. cdclock goes back as
a concept since forever, so this is definitely way too generic a name.
-Daniel
>
> Signed-off-by: Vandana Kannan <vandana.kannan at intel.com>
> Signed-off-by: A.Sunil Kamath <sunil.kamath at intel.com>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 2 +-
> drivers/gpu/drm/i915/intel_display.c | 18 ++++++++++--------
> 2 files changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 52e5f18..1b2a294 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1659,7 +1659,7 @@ struct drm_i915_private {
> int num_fence_regs; /* 8 on pre-965, 16 otherwise */
>
> unsigned int fsb_freq, mem_freq, is_ddr3;
> - unsigned int vlv_cdclk_freq;
> + unsigned int cdclk_freq;
> unsigned int hpll_freq;
>
> /**
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index e54e948..b91862e 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4879,16 +4879,16 @@ static void vlv_update_cdclk(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
>
> - dev_priv->vlv_cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
> + dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
> DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
> - dev_priv->vlv_cdclk_freq);
> + dev_priv->cdclk_freq);
>
> /*
> * Program the gmbus_freq based on the cdclk frequency.
> * BSpec erroneously claims we should aim for 4MHz, but
> * in fact 1MHz is the correct frequency.
> */
> - I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->vlv_cdclk_freq, 1000));
> + I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
> }
>
> /* Adjust CDclk dividers to allow high res or save power if possible */
> @@ -4897,7 +4897,8 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
> struct drm_i915_private *dev_priv = dev->dev_private;
> u32 val, cmd;
>
> - WARN_ON(dev_priv->display.get_display_clock_speed(dev) != dev_priv->vlv_cdclk_freq);
> + WARN_ON(dev_priv->display.get_display_clock_speed(dev)
> + != dev_priv->cdclk_freq);
>
> if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
> cmd = 2;
> @@ -4961,7 +4962,8 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
> struct drm_i915_private *dev_priv = dev->dev_private;
> u32 val, cmd;
>
> - WARN_ON(dev_priv->display.get_display_clock_speed(dev) != dev_priv->vlv_cdclk_freq);
> + WARN_ON(dev_priv->display.get_display_clock_speed(dev)
> + != dev_priv->cdclk_freq);
>
> switch (cdclk) {
> case 333333:
> @@ -5050,7 +5052,7 @@ static void valleyview_modeset_global_pipes(struct drm_device *dev,
> int max_pixclk = intel_mode_max_pixclk(dev_priv);
>
> if (valleyview_calc_cdclk(dev_priv, max_pixclk) ==
> - dev_priv->vlv_cdclk_freq)
> + dev_priv->cdclk_freq)
> return;
>
> /* disable/enable all currently active pipes while we change cdclk */
> @@ -5068,7 +5070,7 @@ static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
> else
> default_credits = PFI_CREDIT(8);
>
> - if (DIV_ROUND_CLOSEST(dev_priv->vlv_cdclk_freq, 1000) >= dev_priv->rps.cz_freq) {
> + if (DIV_ROUND_CLOSEST(dev_priv->cdclk_freq, 1000) >= dev_priv->rps.cz_freq) {
> /* CHV suggested value is 31 or 63 */
> if (IS_CHERRYVIEW(dev_priv))
> credits = PFI_CREDIT_31;
> @@ -5101,7 +5103,7 @@ static void valleyview_modeset_global_resources(struct drm_device *dev)
> int max_pixclk = intel_mode_max_pixclk(dev_priv);
> int req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk);
>
> - if (req_cdclk != dev_priv->vlv_cdclk_freq) {
> + if (req_cdclk != dev_priv->cdclk_freq) {
> /*
> * FIXME: We can end up here with all power domains off, yet
> * with a CDCLK frequency other than the minimum. To account
> --
> 2.1.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-gfx
mailing list