[Intel-gfx] [PATCH 4/7] drm/i915: Use down ei for manual Baytrail RPS calculations

Deepak S deepak.s at linux.intel.com
Wed Mar 18 01:04:56 PDT 2015



On Friday 06 March 2015 08:36 PM, Chris Wilson wrote:
> Use both up/down manual ei calcuations for symmetry and greater
> flexibility for reclocking, instead of faking the down interrupt based
> on a fixed integer number of up interrupts.
>
> Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> ---
>   drivers/gpu/drm/i915/i915_drv.h |  2 --
>   drivers/gpu/drm/i915/i915_irq.c | 15 ++-------------
>   drivers/gpu/drm/i915/i915_reg.h |  1 -
>   drivers/gpu/drm/i915/intel_pm.c |  5 ++---
>   4 files changed, 4 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 73292a183492..efa98c9e5777 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1028,8 +1028,6 @@ struct intel_gen6_power_mgmt {
>   	u8 rp0_freq;		/* Non-overclocked max frequency. */
>   	u32 cz_freq;
>   
> -	u32 ei_interrupt_count;
> -
>   	int last_adj;
>   	enum { LOW_POWER, BETWEEN, HIGH_POWER } power;
>   
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 4b7b86298b37..8892dbdfb629 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -1033,7 +1033,6 @@ void gen6_rps_reset_ei(struct drm_i915_private *dev_priv)
>   {
>   	vlv_c0_read(dev_priv, &dev_priv->rps.down_ei);
>   	dev_priv->rps.up_ei = dev_priv->rps.down_ei;
> -	dev_priv->rps.ei_interrupt_count = 0;
>   }
>   
>   static u32 vlv_wa_c0_ei(struct drm_i915_private *dev_priv, u32 pm_iir)
> @@ -1041,23 +1040,13 @@ static u32 vlv_wa_c0_ei(struct drm_i915_private *dev_priv, u32 pm_iir)
>   	struct intel_rps_ei now;
>   	u32 events = 0;
>   
> -	if ((pm_iir & GEN6_PM_RP_UP_EI_EXPIRED) == 0)
> +	if ((pm_iir & (GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_UP_EI_EXPIRED)) == 0)
>   		return 0;
>   
>   	vlv_c0_read(dev_priv, &now);
>   	if (now.cz_clock == 0)
>   		return 0;
>   
> -	/*
> -	 * To down throttle, C0 residency should be less than down threshold
> -	 * for continous EI intervals. So calculate down EI counters
> -	 * once in VLV_INT_COUNT_FOR_DOWN_EI
> -	 */
> -	if (++dev_priv->rps.ei_interrupt_count >= VLV_INT_COUNT_FOR_DOWN_EI) {
> -		pm_iir |= GEN6_PM_RP_DOWN_EI_EXPIRED;
> -		dev_priv->rps.ei_interrupt_count = 0;
> -	}
> -
>   	if (pm_iir & GEN6_PM_RP_DOWN_EI_EXPIRED) {
>   		if (!vlv_c0_above(dev_priv,
>   				  &dev_priv->rps.down_ei, &now,
> @@ -4247,7 +4236,7 @@ void intel_irq_init(struct drm_i915_private *dev_priv)
>   	/* Let's track the enabled rps events */
>   	if (IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv))
>   		/* WaGsvRC0ResidencyMethod:vlv */
> -		dev_priv->pm_rps_events = GEN6_PM_RP_UP_EI_EXPIRED;
> +		dev_priv->pm_rps_events = GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_UP_EI_EXPIRED;
>   	else
>   		dev_priv->pm_rps_events = GEN6_PM_RPS_EVENTS;
>   
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 324922d8f8a1..ca24a2d4a823 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -665,7 +665,6 @@ enum skl_disp_power_wells {
>   #define VLV_CZ_CLOCK_TO_MILLI_SEC		100000
>   #define VLV_RP_UP_EI_THRESHOLD			90
>   #define VLV_RP_DOWN_EI_THRESHOLD		70
> -#define VLV_INT_COUNT_FOR_DOWN_EI		5
>   
>   /* vlv2 north clock has */
>   #define CCK_FUSE_REG				0x8
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index b37d634bea99..55dc406cd195 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3784,11 +3784,10 @@ static u32 gen6_rps_pm_mask(struct drm_i915_private *dev_priv, u8 val)
>   	u32 mask = 0;
>   
>   	if (val > dev_priv->rps.min_freq_softlimit)
> -		mask |= GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT;
> +		mask |= GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT;
>   	if (val < dev_priv->rps.max_freq_softlimit)
> -		mask |= GEN6_PM_RP_UP_THRESHOLD;
> +		mask |= GEN6_PM_RP_UP_EI_EXPIRED | GEN6_PM_RP_UP_THRESHOLD;
>   
> -	mask |= dev_priv->pm_rps_events & (GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_UP_EI_EXPIRED);
>   	mask &= dev_priv->pm_rps_events;
>   
>   	return gen6_sanitize_rps_pm_mask(dev_priv, ~mask);
>
Patch looks fine
Reviewed-by: Deepak S<deepak.s at linux.intel.com>



More information about the Intel-gfx mailing list