[Intel-gfx] [PATCH 21/21 v2] drm/i915: Enable skylake sprite plane scaling using shared scalers
Chandra Konduru
chandra.konduru at intel.com
Fri Mar 20 17:04:42 PDT 2015
This patch enables skylake sprite plane display scaling using shared
scalers atomic desgin.
v2:
-use single copy of scaler limits (Matt)
Signed-off-by: Chandra Konduru <chandra.konduru at intel.com>
---
drivers/gpu/drm/i915/intel_sprite.c | 79 +++++++++++++++++++++++++++--------
1 file changed, 61 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 0194390..b4452bc 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -33,6 +33,7 @@
#include <drm/drm_crtc.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_rect.h>
+#include <drm/drm_atomic.h>
#include <drm/drm_plane_helper.h>
#include "intel_drv.h"
#include <drm/i915_drm.h>
@@ -191,6 +192,8 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
const int plane = intel_plane->plane + 1;
u32 plane_ctl, stride_div;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
+ struct intel_crtc_state *crtc_state = to_intel_crtc(crtc)->config;
+ int scaler_id;
plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
@@ -274,16 +277,39 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
fb->pixel_format);
+ skl_detach_scaler(crtc, drm_plane);
+ scaler_id = to_intel_plane_state(drm_plane->state)->scaler_id;
+
/* Sizes are 0 based */
src_w--;
src_h--;
crtc_w--;
crtc_h--;
+ /* program plane scaler */
+ if (scaler_id >= 0) {
+ uint32_t ps_ctrl = 0;
+
+ DRM_DEBUG_KMS("plane = %d PS_PLANE_SEL(plane) = 0x%x\n", plane,
+ PS_PLANE_SEL(plane));
+ ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(plane) |
+ crtc_state->scaler_state.scalers[scaler_id].mode |
+ crtc_state->scaler_state.scalers[scaler_id].filter;
+ I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
+ I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
+ I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (crtc_x << 16) | crtc_y);
+ I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id),
+ ((crtc_w + 1) << 16)|(crtc_h + 1));
+
+ I915_WRITE(PLANE_POS(pipe, plane), 0);
+ I915_WRITE(PLANE_SIZE(pipe, plane), (src_h << 16) | src_w);
+ } else {
+ I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
+ I915_WRITE(PLANE_SIZE(pipe, plane), (crtc_h << 16) | crtc_w);
+ }
+
I915_WRITE(PLANE_OFFSET(pipe, plane), (y << 16) | x);
I915_WRITE(PLANE_STRIDE(pipe, plane), fb->pitches[0] / stride_div);
- I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
- I915_WRITE(PLANE_SIZE(pipe, plane), (crtc_h << 16) | crtc_w);
I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
I915_WRITE(PLANE_SURF(pipe, plane), i915_gem_obj_ggtt_offset(obj));
POSTING_READ(PLANE_SURF(pipe, plane));
@@ -305,6 +331,8 @@ skl_disable_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc)
I915_WRITE(PLANE_CTL(pipe, plane), 0);
POSTING_READ(PLANE_CTL(pipe, plane));
+ skl_detach_scaler(crtc, drm_plane);
+
intel_update_sprite_watermarks(drm_plane, crtc, 0, 0, 0, false, false);
}
@@ -1088,7 +1116,9 @@ static int
intel_check_sprite_plane(struct drm_plane *plane,
struct intel_plane_state *state)
{
+ struct drm_device *dev = plane->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(state->base.crtc);
+ struct intel_crtc_state *crtc_state;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct drm_framebuffer *fb = state->base.fb;
int crtc_x, crtc_y;
@@ -1097,11 +1127,16 @@ intel_check_sprite_plane(struct drm_plane *plane,
struct drm_rect *src = &state->src;
struct drm_rect *dst = &state->dst;
const struct drm_rect *clip = &state->clip;
+ struct intel_crtc_scaler_state *scaler_state;
int hscale, vscale;
int max_scale, min_scale;
int pixel_size;
+ int ret;
intel_crtc = intel_crtc ? intel_crtc : to_intel_crtc(plane->crtc);
+ crtc_state = state->base.state ?
+ intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;
+ scaler_state = crtc_state ? &crtc_state->scaler_state : NULL;
if (!fb) {
state->visible = false;
@@ -1128,6 +1163,11 @@ intel_check_sprite_plane(struct drm_plane *plane,
max_scale = intel_plane->max_downscale << 16;
min_scale = intel_plane->can_scale ? 1 : (1 << 16);
+ if (INTEL_INFO(dev)->gen >= 9 && scaler_state && scaler_state->num_scalers) {
+ min_scale = 1;
+ max_scale = (100 << 16) / scaler_state->min_hsr;
+ }
+
drm_rect_rotate(src, fb->width << 16, fb->height << 16,
state->base.rotation);
@@ -1223,18 +1263,18 @@ intel_check_sprite_plane(struct drm_plane *plane,
width_bytes = ((src_x * pixel_size) & 63) +
src_w * pixel_size;
- if (src_w > 2048 || src_h > 2048 ||
- width_bytes > 4096 || fb->pitches[0] > 4096) {
+ if (INTEL_INFO(dev)->gen < 9 && (src_w > 2048 || src_h > 2048 ||
+ width_bytes > 4096 || fb->pitches[0] > 4096)) {
DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n");
return -EINVAL;
}
}
if (state->visible) {
- src->x1 = src_x;
- src->x2 = src_x + src_w;
- src->y1 = src_y;
- src->y2 = src_y + src_h;
+ src->x1 = src_x << 16;
+ src->x2 = (src_x + src_w) << 16;
+ src->y1 = src_y << 16;
+ src->y2 = (src_y + src_h) << 16;
}
dst->x1 = crtc_x;
@@ -1271,6 +1311,13 @@ finish:
intel_crtc->atomic.update_wm = true;
}
+ if (INTEL_INFO(dev)->gen >= 9) {
+ ret = skl_update_scaler_users(intel_crtc, crtc_state, intel_plane,
+ state, 0);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
@@ -1301,10 +1348,10 @@ intel_commit_sprite_plane(struct drm_plane *plane,
crtc_y = state->dst.y1;
crtc_w = drm_rect_width(&state->dst);
crtc_h = drm_rect_height(&state->dst);
- src_x = state->src.x1;
- src_y = state->src.y1;
- src_w = drm_rect_width(&state->src);
- src_h = drm_rect_height(&state->src);
+ src_x = state->src.x1 >> 16;
+ src_y = state->src.y1 >> 16;
+ src_w = drm_rect_width(&state->src) >> 16;
+ src_h = drm_rect_height(&state->src) >> 16;
intel_plane->update_plane(plane, crtc, fb, obj,
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h);
@@ -1493,12 +1540,8 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
}
break;
case 9:
- /*
- * FIXME: Skylake planes can be scaled (with some restrictions),
- * but this is for another time.
- */
- intel_plane->can_scale = false;
- intel_plane->max_downscale = 1;
+ intel_plane->can_scale = true;
+ intel_plane->max_downscale = 2; /* updated later */
intel_plane->update_plane = skl_update_plane;
intel_plane->disable_plane = skl_disable_plane;
intel_plane->update_colorkey = skl_update_colorkey;
--
1.7.9.5
More information about the Intel-gfx
mailing list